Re: PSK error in wicd-1.7.0

Morten Juhl-Johansen Zölde-Fejér <[email protected]>
Newsgroups gmane.linux.slackware
Message-ID <[email protected]>
On Sun, 4 Mar 2012 10:45:18 -0800 (PST)
Rich Shepard <[email protected]> wrote:

>    You helped me resolve the shutdown issue and I hope you can help me
> resolve this last issue: wireless connectivity between the Sony Vaio
> running 13.37/x86_64 with wicd-1.7.0 and the ASUS WL 520GC wireless
> access point.
> 
>    This issue seems common on several ubuntu threads but appears to
> be a conflict with the default network manager.
> 
>     When invoked with 'wicd-client -n' from the command line, up pops
> the wicd network manager showing our local AP at 100% right on top.
> But, when the 'Connect' button is clicked the network is not
> immediately attached. Instead, I keep getting the error that the
> pre-shared key (PSK) password is incorrect.
> 
>    Both wicd and the WAP are using WAP2 for authentification and I
> have a 14-character Pre-shared key (called WPA 1/2-Personal on the
> WAP). When I log into the WAP and check, the PSK password is just
> what I set it to, and the same as I enter in the client laptop.
> 
>    I downgraded to wicd-1.6.2.1 from Slackware-13.0/64bit but that
> made no difference. I'm totally out of ideas since the
> authentification protocols and passwords match on both ends of the
> connection.
> 
>     What might I be doing incorrectly here? This is the last hurdle
> in the race to get this new laptop fully up and running.

Have you made sure that the system works correctly with the driver
using wpa_supplicant? I have had driver issues look like WICD issues
from time to time. Also, you could consider this if it is a WICD
problem that won't fix:
http://task3.cc/190/networkmanager-on-slackware-13-37/

All the best,
Morten
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.