Re: Dual Core CPU on Abit NI8-Board
Frank von Daak <[email protected]>
| Newsgroups | gmane.linux.smp |
|---|---|
| Message-ID | <[email protected]> |
Am Wednesday, 5. April 2006 12:15 schrieben Sie: >> The only problem in this case is that the machine is very unstable on >> 3D-Action... >> any more ideas? >You get IRQ sharing for you video adpaters in this last case: >7: 5178 0 XT-PIC ohci_hcd:usb3, nvidia, nvidia >Those video cards are on PCI-Express bus? >With the "NVidia SLI" etc... yes and no :-} I've attached the two cards in SLI-Mode to the board. This means that I've placed the chip for SLI-Mode (you can see the red chip on this image between the two pcie-slots: http://www.etech4sale.com/images/0146000_0146999/146929_h.jpg) This must be done, to run both pcie-slots in 16x mode. If not, only one slot is 16x the other is 1x. And I've connected both cards with a SLI-bridge - but: I don't run use the SLI mode in linux! I'm running a flightsim (x-plane) and have connected three monitors. Because a normal graphics-adapter can handle just 2 monitors there was the need for two graphics-adapters. And they are running fine, if I don't append anything in my lilo.conf! But I can use just on one cpu-core :-( I'm not sure if this is realy a problem with the x-server, or? But I'm really unsure: whats my problem? SMP or Nvidia? >You're welcome since my last message just hang your machine :)) hehe - that's really no problem!!! Greetings Frank -- -- Frank von Daak [email protected] - To unsubscribe from this list: send the line "unsubscribe linux-smp" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html