Re: Dual Core CPU on Abit NI8-Board

Frank von Daak <[email protected]>
Newsgroups gmane.linux.acpi.devel,gmane.linux.smp
Message-ID <[email protected]>
Hello again!

After contacting the Abit-Support I know, what is my problem...

My motherboard does not support FSB800-CPUs with less then 3,0GHz :-(
http://www.abit.com.tw/cpu_support/intel-pd-8xx.htm

So, now I have an expensive motherboard and an expensive 2,8 GHz cpu that 
won't work correctly together - funny, isn't it :-/
The next thing I'll do is to buy a 3,0GHz CPU and hope that this will work 
better...

Thank you very much for your support!!!

Greetings
Frank

Am Friday, 7. April 2006 07:07 schrieb Frank von Daak:
>Hello!
>
>I've a problem with my configuration and maybe someone of you can help me
> out.
>
>My system looks like this:
>Abit NI8 SLI mother board
>CPU Pentium-D 2,8 GHz (dual-core)
>1 GB DDR2-RAM (one module)
>2x GeForc7800GTX grahpics adapter (to connect three monitors)
>kernel 2.6.17-rc1 (vanilla)
>
>My problem ist, that a "cat /proc/cpuinfo" show's just one cpu-core if I
> boot with ACPI enabled.
>If I disable ACPI by removing it from kernel or by passing
> 'append="acpi=off"' to my lilo.conf, the system is going unstable. It is
> freezing sporadical without any trace output. The freezes occur after a
> short time, especialy when I run OpenGL-applications - but also without
> OpenGL!
>
>I have collected some information about my system here:
>--------------------------------------------------------------
>dmesg's output with acpi-debug enabled in kernel:
>http://www.kpage.de/dmesg_acpi3.txt
>
>My kernels ".config"-file:
>http://www.kpage.de/config.txt
>
>The output of "cat /proc/interrupts" when ACPI is enabled:
>http://www.kpage.de/interrupts_acpi3.txt
>
>The output of "cat /proc/interrupts" when ACPI is disabled:
>http://www.kpage.de/interrupts_noacpi3.txt
>
>The output of "cat /proc/cpuinfo" if ACPI is enabled:
>http://www.kpage.de/cpuinfo_acpi3.txt
>
>The output of "cat /proc/cpuinfo" if ACPI is disabled:
>http://www.kpage.de/cpuinfo_noacpi3.txt
>
>And last, but not least: the output of "acpidump":
>http://www.kpage.de/acpidump.txt
>--------------------------------------------------------------
>
>I've started a discussion about this problem on the linux-smp mailinglist.
> You can find some more information about what I've done by now here:
>http://marc.theaimsgroup.com/?l=linux-smp&m=114421848813280&w=2
>
>I have also contacted nvidia and abit - without response from abit by the
>time...
>
>Who can give me a little help?
>
>Thank you very much!!!
>Greetings
>Frank

-- 
--
Frank von Daak
[email protected]
-
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.