From: bui duc phuc <[email protected]>
Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.
Signed-off-by: bui duc phuc <[email protected]>
---
sound/soc/codecs/tas2781-comlib-i2c.c | 5 ++---
sound/soc/codecs/tas2781-i2c.c | 32 +++++++++++----------------
2 files changed, 15 insertions(+), 22 deletions(-)
diff --git a/sound/soc/codecs/tas2781-comlib-i2c.c b/sound/soc/codecs/tas2781-comlib-i2c.c
index e24d56a14cfd..79b5f5b04c74 100644
--- a/sound/soc/codecs/tas2781-comlib-i2c.c
+++ b/sound/soc/codecs/tas2781-comlib-i2c.c
@@ -6,6 +6,7 @@
//
// Author: Shenghao Ding <[email protected]>
+#include <linux/cleanup.h>
#include <linux/crc8.h>
#include <linux/firmware.h>
#include <linux/gpio/consumer.h>
@@ -342,7 +343,7 @@ int tascodec_init(struct tasdevice_priv *tas_priv, void *codec,
/* Codec Lock Hold to ensure that codec_probe and firmware parsing and
* loading do not simultaneously execute.
*/
- mutex_lock(&tas_priv->codec_lock);
+ guard(mutex)(&tas_priv->codec_lock);
if (tas_priv->name_prefix)
scnprintf(tas_priv->rca_binaryname, 64, "%s-%sRCA%d.bin",
@@ -360,8 +361,6 @@ int tascodec_init(struct tasdevice_priv *tas_priv, void *codec,
dev_err(tas_priv->dev, "request_firmware_nowait err:0x%08x\n",
ret);
- /* Codec Lock Release*/
- mutex_unlock(&tas_priv->codec_lock);
return ret;
}
EXPORT_SYMBOL_GPL(tascodec_init);
diff --git a/sound/soc/codecs/tas2781-i2c.c b/sound/soc/codecs/tas2781-i2c.c
index 9e6f0ad5f05d..16dd0989e5e2 100644
--- a/sound/soc/codecs/tas2781-i2c.c
+++ b/sound/soc/codecs/tas2781-i2c.c
@@ -13,6 +13,7 @@
// Author: Kevin Lu <[email protected]>
//
+#include <linux/cleanup.h>
#include <linux/crc8.h>
#include <linux/firmware.h>
#include <linux/gpio/consumer.h>
@@ -843,12 +844,12 @@ static int tasdevice_digital_gain_get(
unsigned char data[4];
int ret;
- mutex_lock(&tas_dev->codec_lock);
+ guard(mutex)(&tas_dev->codec_lock);
/* Read the primary device */
ret = tasdevice_dev_bulk_read(tas_dev, 0, reg, data, 4);
if (ret) {
dev_err(tas_dev->dev, "%s, get AMP vol error\n", __func__);
- goto out;
+ return ret;
}
target = get_unaligned_be32(&data[0]);
@@ -868,8 +869,7 @@ static int tasdevice_digital_gain_get(
/* find out the member same as or closer to the current volume */
ucontrol->value.integer.value[0] =
abs(target - ar_l) <= abs(target - ar_r) ? l : r;
-out:
- mutex_unlock(&tas_dev->codec_lock);
+
return 0;
}
@@ -882,29 +882,26 @@ static int tasdevice_digital_gain_put(
struct snd_soc_component *codec = snd_kcontrol_chip(kcontrol);
struct tasdevice_priv *tas_dev = snd_soc_component_get_drvdata(codec);
int vol = ucontrol->value.integer.value[0];
- int status = 0, max = mc->max, rc = 1;
+ int status = 0, max = mc->max;
int i, ret;
unsigned int reg = mc->reg;
unsigned int volrd, volwr;
unsigned char data[4];
vol = clamp(vol, 0, max);
- mutex_lock(&tas_dev->codec_lock);
+ guard(mutex)(&tas_dev->codec_lock);
/* Read the primary device */
ret = tasdevice_dev_bulk_read(tas_dev, 0, reg, data, 4);
if (ret) {
dev_err(tas_dev->dev, "%s, get AMP vol error\n", __func__);
- rc = -1;
- goto out;
+ return -1;
}
volrd = get_unaligned_be32(&data[0]);
volwr = get_unaligned_be32(tas_dev->dvc_tlv_table[vol]);
- if (volrd == volwr) {
- rc = 0;
- goto out;
- }
+ if (volrd == volwr)
+ return 0;
for (i = 0; i < tas_dev->ndev; i++) {
ret = tasdevice_dev_bulk_write(tas_dev, i, reg,
@@ -918,10 +915,9 @@ static int tasdevice_digital_gain_put(
}
if (status)
- rc = -1;
-out:
- mutex_unlock(&tas_dev->codec_lock);
- return rc;
+ return -1;
+
+ return 1;
}
static const struct snd_kcontrol_new tasdevice_cali_controls[] = {
@@ -1766,12 +1762,10 @@ static int tasdevice_dapm_event(struct snd_soc_dapm_widget *w,
int state = 0;
/* Codec Lock Hold */
- mutex_lock(&tas_priv->codec_lock);
+ guard(mutex)(&tas_priv->codec_lock);
if (event == SND_SOC_DAPM_PRE_PMD)
state = 1;
tasdevice_tuning_switch(tas_priv, state);
- /* Codec Lock Release*/
- mutex_unlock(&tas_priv->codec_lock);
return 0;
}
--
2.43.0
lmpx.com only provides a reader for public news (NNTP) servers. It is not
affiliated with the servers or forums shown here and is not responsible for
the content of articles, which is written by their respective authors.