Re: [PATCH v3] ALSA: hda/realtek: Enable micmute LED on HP EliteBook 6 G1a p/n: AD3Q9ET#UUG
Denis Batishchev <[email protected]>
| Newsgroups | gmane.linux.kernel.stable,gmane.linux.sound,gmane.linux.kernel |
|---|---|
| Message-ID | <[email protected]> |
Hi Takashi, Thanks for pointing that out and applying it to for-next. I'll pay closer attention next time :) Thanks again, Denis B. On Mon, 2026-08-10 at 17:38 +0200, Takashi Iwai wrote: > On Mon, 10 Aug 2026 17:14:41 +0200, > Denis Batishchev wrote: > > > > The HP EliteBook 6 G1a (SSID 103c:8e0d) uses a Realtek ALC236 codec. > > Without a quirk no fixup is selected and the mic-mute LED stays off. > > It needs the same ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF quirk as the > > already-supported 14" variant (SSID 103c:8dfb), so add it. > > > > Signed-off-by: Denis Batishchev <[email protected]> > > Cc: <[email protected]> > > --- > > v2: fix indentation (per Takashi Iwai <[email protected]>) > > v3: fix indentation, 2nd trial (per Takashi Iwai <[email protected]>) > > --- > > sound/hda/codecs/realtek/alc269.c | 1 + > > 1 file changed, 1 insertion(+) > > > > diff --git a/sound/hda/codecs/realtek/alc269.c b/sound/hda/codecs/realtek/alc269.c > > index 6b36c730c..bcbdafb42 100644 > > --- a/sound/hda/codecs/realtek/alc269.c > > +++ b/sound/hda/codecs/realtek/alc269.c > > @@ -7544,6 +7544,7 @@ static const struct hda_quirk alc269_fixup_tbl[] = { > > SND_PCI_QUIRK(0x103c, 0x8dfb, "HP EliteBook 6 G1a 14", ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF), > > SND_PCI_QUIRK(0x103c, 0x8dfc, "HP EliteBook 645 G12", ALC236_FIXUP_HP_GPIO_LED), > > SND_PCI_QUIRK(0x103c, 0x8dfd, "HP EliteBook 6 G1a 16", ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF), > > + SND_PCI_QUIRK(0x103c, 0x8e0d, "HP EliteBook 6 G1a 14 (AD3Q9ET#UUG)", ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF), > > SND_PCI_QUIRK(0x103c, 0x8dfe, "HP EliteBook 665 G12", ALC236_FIXUP_HP_GPIO_LED), > > SND_PCI_QUIRK(0x103c, 0x8e11, "HP Trekker", ALC287_FIXUP_CS35L41_I2C_2), > > SND_PCI_QUIRK(0x103c, 0x8e12, "HP Trekker", ALC287_FIXUP_CS35L41_I2C_2), > > The table is sorted in PCI SSID order, so it should have been put at > the one entry below; for saving the internet bandwidth, I corrected > locally at applying now :) > > Applied to for-next branch. Thanks. > > > Takashi