AW: unattendend Install with IMSM RAID not working

"Feldweg, Stefan" <[email protected]>
Newsgroups gmane.linux.suse.autoinstall
Message-ID <33FB7C3F6F8D3B498E96C2CBACA6B1AE3FB83DD8FD@mail-1>
Hello,

thanks for the quick response.
 I forgot to mention that I'm doing a Network Install via PXE-Boot. And I don't know where to set that parameter since I haven't got a "boot prompt"?

Mit freundlichen Grüßen 

Stefan Feldweg
Teammanager Systemadministration

Integrata AG  
Zettachring 4, 70567 Stuttgart 
Tel.    +49 711 62010 - 246, Fax - 176
Mobil +49 171 566 4336
E-Mail [email protected]  
 
Internet: http://www.integrata.de
Seminaranmeldungen: http://www.seminarplaner.de 

Sitz der Gesellschaft: Zettachring 4, 70567 Stuttgart
Registergericht: Amtsgericht Stuttgart HRB 721012 / Ust.-Ident.-Nr. DE 173 082 820
Vorstand: Ingmar J. Rath (Vorsitz), Dr. Andreas Dahmen, Gerhard Wächter
Vorsitzender des Aufsichtsrates: RA und Notar Stephan Haack


-----Ursprüngliche Nachricht-----
Von: Thomas Fehr [mailto:[email protected]] 
Gesendet: Mittwoch, 18. Dezember 2013 14:51
An: Feldweg, Stefan
Cc: [email protected]
Betreff: Re: [opensuse-autoinstall] unattendend Install with IMSM RAID not working

Hi,

On Wed, Dec 18, Feldweg, Stefan wrote:

> Hello,
> 
> I'm trying to do a fully unattended Install of SLES 11 SP2 on a System 
> with a configured RAID by Intel Matrix Storage Manager. Everything is 
> running well except that i get a message "You are running an Intel(R) Matrix Storage Manager compatible platform The following MD-compatible RAID devices were detected:
> Volume0
> If they are clean devices or conatain partitions, you can use MD Partitionable RAID Subsystem to handle them. In case of a clean device you will be able to install a System on it and boot from such a RAID. Do you want MD Partitionable RAID Subsystem to manage These partitions?"
> 
> If i answer Yes on that Message everything goes well and the Installation is running fully unattendend.
> How can i get rid of that message?

yast2-storage/libstorage check the environment variable LIBSTORAGE_IMSM_DRIVER.
For forcing it to use mdadm partitionable raid you need to set to "MDADM".
You can e.g. add LIBSTORAGE_IMSM_DRIVER=MDADM to boot command prompt, this puts it into environment of started yast2.

Tschuess, 
	Thomas Fehr
--
  Thomas Fehr, SuSE Linux Products GmbH, Maxfeldstr. 5, 90409 Nuernberg, Germany
  GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer, HRB 16746 (AG Nürnberg)
  Tel: +49-911-74053-0,  Fax: +49-911-74053-482,  Email: [email protected]
  GPG public key available.
-- 
To unsubscribe, e-mail: [email protected]
To contact the owner, e-mail: [email protected]
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.