Probleme mit irda
Tilo Lutz <[email protected]>
| Newsgroups | gmane.linux.suse.laptop |
|---|---|
| Message-ID | <[email protected]> |
Guten morgen
Unter Suse 10.0 konnte ich meinen irda Adapter im Notebook
mit nsc-ircc nutzen. Ich benötige dafür folgende Optionen:
/etc/modprobe.d/nsc-ircc:
acer:/etc/modprobe.d # cat nsc-ircc
alias irda0 nsc-ircc
options nsc-ircc dongle_id=0x09 irq=3 dma=0 io=0x2f8
install nsc-ircc /bin/setserial /dev/ttyS1 uart none port 0 irq 0; modprobe
--ignore-install nsc-ircc
Unter 10.1 funktioniert das leider nicht mehr.
Der Treiber wird anscheinend fehlerfrei geladen:
dmesg: [...]
nsc_ircc: module not supported by Novell, setting U taint flag.
nsc-ircc, Found chip at base=0x164e
nsc-ircc, driver loaded (Dag Brattli)
IrDA: Registered device irda0
nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500
Das Problem ist, dass /dev/irda0 nicht existiert.
Was kann ich tun?
Bis dann, Tilo
--
Um die Liste abzubestellen, schicken Sie eine Mail an:
[email protected]
Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken
Sie eine Mail an: [email protected]