LAN not runs
"Sascha 'saigkill' Manns" <[email protected]> Sun, 13 Dec 2009 17:53:16 +0100
| Newsgroups | gmane.linux.suse.laptop |
|---|---|
| Organization | openSUSE Marketing Team |
| Message-ID | <[email protected]> |
--Boundary-00=_9vRJLFNpIP74CJt Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Hello Mates, i have recieved an Notebook from my Friend. Not the newest: Samsung P35. Now i have the Problem, that LAN not runs under 11.2. I've tried with plugged Cable while booting, and plugging after Booting. But it doesn't find the LAN. I've attached the dmesg Output. Has anyone an Idea what happend? -- Sincerely yours Sascha Manns open-slx GmbH openSUSE Member openSUSE Community & Support Agent openSUSE Ambassador Web: http://www.open-slx.de openSUSE Marketing Team Web: http://www.open-slx.com openSUSE Build Service openSUSE Medical Team Web: http://saschamanns.gulli.to Blog: http://saigkill.wordpress.com ClaimID: http://claimid.com/saigkill --Boundary-00=_9vRJLFNpIP74CJt Content-Type: text/plain; charset="UTF-8"; name="dmesg.txt" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="dmesg.txt" ascha@linux-rkg2:~> dmesg [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31.5-0.1-default (geeko@buildhost) (gcc version 4.4.1 [gcc-4_4-branch revision 150839] (SUSE Linux) ) #1 SMP 2009-10-26 15:49:03 +0100 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003f690000 (usable) [ 0.000000] BIOS-e820: 000000003f690000 - 000000003f69f000 (ACPI data) [ 0.000000] BIOS-e820: 000000003f69f000 - 000000003f700000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003f700000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0006000 (reserved) [ 0.000000] BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x3f690 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-E3FFF uncachable [ 0.000000] E4000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 base 03F700000 mask FFFF00000 uncachable [ 0.000000] 2 base 03F800000 mask FFF800000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] PAT not supported by CPU. [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000003f690000 (usable) [ 0.000000] modified: 000000003f690000 - 000000003f69f000 (ACPI data) [ 0.000000] modified: 000000003f69f000 - 000000003f700000 (ACPI NVS) [ 0.000000] modified: 000000003f700000 - 0000000040000000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0006000 (reserved) [ 0.000000] modified: 00000000f0008000 - 00000000f000c000 (reserved) [ 0.000000] modified: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] modified: 00000000fed20000 - 00000000fed90000 (reserved) [ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000373fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037000000 page 2M [ 0.000000] 0037000000 - 00373fe000 page 4k [ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000 [ 0.000000] RAMDISK: 37abd000 - 37fefe4a [ 0.000000] Allocated new RAMDISK: 00a1b000 - 00f4de4a [ 0.000000] Move RAMDISK from 0000000037abd000 - 0000000037fefe49 to 00a1b000 - 00f4de49 [ 0.000000] ACPI: RSDP 000f76d0 00014 (v00 PTLTD ) [ 0.000000] ACPI: RSDT 3f698c8c 00048 (v01 PTLTD Ohlone00 06040000 LTP 00000000) [ 0.000000] ACPI: FACP 3f69ee96 00074 (v01 INTEL ALVISO 06040000 LOHR 0000005F) [ 0.000000] ACPI: DSDT 3f6996b0 057E6 (v01 INTEL ALVISO 06040000 INTL 20030224) [ 0.000000] ACPI: FACS 3f6affc0 00040 [ 0.000000] ACPI: APIC 3f69ef0a 0005A (v01 INTEL ALVISO 06040000 LOHR 0000005F) [ 0.000000] ACPI: HPET 3f69ef64 00038 (v01 INTEL ALVISO 06040000 LOHR 0000005F) [ 0.000000] ACPI: MCFG 3f69ef9c 0003C (v01 INTEL ALVISO 06040000 LOHR 0000005F) [ 0.000000] ACPI: BOOT 3f69efd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) [ 0.000000] ACPI: SSDT 3f699482 0022E (v01 SataRe SataAhci 00001000 INTL 20030224) [ 0.000000] ACPI: SSDT 3f698f57 0031B (v01 PmRef Cpu0Ist 00003000 INTL 20030224) [ 0.000000] ACPI: SSDT 3f698d9d 001BA (v01 PmRef Cpu0Cst 00003001 INTL 20030224) [ 0.000000] ACPI: SSDT 3f698cd4 000C9 (v01 PmRef CpuPm 00003000 INTL 20030224) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 130MB HIGHMEM available. [ 0.000000] 883MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 373fe000 [ 0.000000] low ram: 0 - 373fe000 [ 0.000000] node 0 low ram: 00000000 - 373fe000 [ 0.000000] node 0 bootmap 00012000 - 00018e80 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000200000 - 0000a163a8] TEXT DATA BSS ==> [0000200000 - 0000a163a8] [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #5 [0000a17000 - 0000a1a140] BRK ==> [0000a17000 - 0000a1a140] [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] #7 [0000a1b000 - 0000f4de4a] NEW RAMDISK ==> [0000a1b000 - 0000f4de4a] [ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000373fe [ 0.000000] HighMem 0x000373fe -> 0x0003f690 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003f690 [ 0.000000] On node 0 totalpages: 259615 [ 0.000000] free_area_init_node: node 0, pgdat c089f020, node_mem_map c1000200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1736 pages used for memmap [ 0.000000] Normal zone: 220470 pages, LIFO batch:31 [ 0.000000] HighMem zone: 262 pages used for memmap [ 0.000000] HighMem zone: 33164 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000) [ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages at c17f5000, static data 33148 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257585 [ 0.000000] Kernel command line: root=/dev/disk/by-id/ata-HTS541080G9AT00_MP28MBXBGJJJ7H-part3 resume=/dev/disk/by-id/ata-HTS541080G9AT00_MP28MBXBGJJJ7H-part1 splash=verbose quiet vga=0x317 [ 0.000000] bootsplash: verbose mode. [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (000373fe:0003f690) [ 0.000000] Memory: 1015456k/1038912k available (4130k kernel code, 22644k reserved, 2695k data, 460k init, 133704k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xffd34000 - 0xfffff000 (2860 kB) [ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB) [ 0.000000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB) [ 0.000000] .init : 0xc08ab000 - 0xc091e000 ( 460 kB) [ 0.000000] .data : 0xc06088f2 - 0xc08aa728 (2695 kB) [ 0.000000] .text : 0xc0200000 - 0xc06088f2 (4130 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:256 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1729.072 MHz processor. [ 0.000070] Console: colour dummy device 80x25 [ 0.000075] console [tty0] enabled [ 0.000262] hpet clockevent registered [ 0.000267] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.000274] Calibrating delay loop (skipped), value calculated using timer frequency.. 3458.14 BogoMIPS (lpj=6916288) [ 0.006129] kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved [ 0.006205] Security Framework initialized [ 0.006230] AppArmor: AppArmor initialized [ 0.006248] Mount-cache hash table entries: 512 [ 0.006397] Initializing cgroup subsys ns [ 0.006402] Initializing cgroup subsys cpuacct [ 0.006407] Initializing cgroup subsys memory [ 0.006416] Initializing cgroup subsys devices [ 0.006420] Initializing cgroup subsys freezer [ 0.006423] Initializing cgroup subsys net_cls [ 0.006448] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.006452] CPU: L2 cache: 2048K [ 0.006848] mce: CPU supports 5 MCE banks [ 0.006859] CPU0: Thermal monitoring enabled (TM1) [ 0.006872] Performance Counters: p6 PMU driver. [ 0.006881] ... version: 0 [ 0.006883] ... bit width: 32 [ 0.006886] ... generic counters: 2 [ 0.006888] ... value mask: 00000000ffffffff [ 0.006891] ... max period: 000000007fffffff [ 0.006894] ... fixed-purpose counters: 0 [ 0.006897] ... counter mask: 0000000000000003 [ 0.006902] Checking 'hlt' instruction... OK. [ 0.020627] SMP alternatives: switching to UP code [ 0.026280] Freeing SMP alternatives: 15k freed [ 0.026289] ACPI: Core revision 20090521 [ 0.040444] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.080782] CPU0: Intel(R) Pentium(R) M processor 1.73GHz stepping 08 [ 0.084001] Brought up 1 CPUs [ 0.084001] Total of 1 processors activated (3458.14 BogoMIPS). [ 0.084001] CPU0 attaching NULL sched-domain. [ 0.084001] devtmpfs: initialized [ 0.084001] Booting paravirtualized kernel on bare hardware [ 0.084001] regulator: core version 0.5 [ 0.084001] Time: 17:11:59 Date: 12/13/09 [ 0.084001] NET: Registered protocol family 16 [ 0.084001] ACPI: bus type pci registered [ 0.084001] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.084001] PCI: MCFG area at e0000000 reserved in E820 [ 0.084001] PCI: Using MMCONFIG for extended config space [ 0.084001] PCI: Using configuration type 1 for base access [ 0.084001] Samsung X20 Laptop detected: enabling PCI bus# renumbering (pci=assign-busses) [ 0.084001] bio: create slab <bio-0> at 0 [ 0.084001] ACPI: EC: Look up EC in DSDT [ 0.088031] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.092103] ACPI: Interpreter enabled [ 0.092112] ACPI: (supports S0 S3 S4 S5) [ 0.092141] ACPI: Using IOAPIC for interrupt routing [ 0.099496] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.099500] ACPI: EC: driver started in interrupt mode [ 0.099581] ACPI: Power Resource [CFAN] (on) [ 0.100249] ACPI: ACPI Dock Station Driver: 1 docks/bays found [ 0.101030] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.101124] pci 0000:00:02.0: reg 10 32bit mmio: [0xb0080000-0xb00fffff] [ 0.101131] pci 0000:00:02.0: reg 14 io port: [0x1800-0x1807] [ 0.101137] pci 0000:00:02.0: reg 18 32bit mmio: [0xc0000000-0xcfffffff] [ 0.101143] pci 0000:00:02.0: reg 1c 32bit mmio: [0xb0000000-0xb003ffff] [ 0.101179] pci 0000:00:02.1: reg 10 32bit mmio: [0x000000-0x07ffff] [ 0.101318] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.101324] pci 0000:00:1c.0: PME# disabled [ 0.101394] pci 0000:00:1d.0: reg 20 io port: [0x1820-0x183f] [ 0.101459] pci 0000:00:1d.1: reg 20 io port: [0x1840-0x185f] [ 0.101524] pci 0000:00:1d.2: reg 20 io port: [0x1860-0x187f] [ 0.101588] pci 0000:00:1d.3: reg 20 io port: [0x1880-0x189f] [ 0.101656] pci 0000:00:1d.7: reg 10 32bit mmio: [0xb0040000-0xb00403ff] [ 0.101718] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.101724] pci 0000:00:1d.7: PME# disabled [ 0.101832] pci 0000:00:1e.2: reg 10 io port: [0x1c00-0x1cff] [ 0.101841] pci 0000:00:1e.2: reg 14 io port: [0x18c0-0x18ff] [ 0.101850] pci 0000:00:1e.2: reg 18 32bit mmio: [0xb0040800-0xb00409ff] [ 0.101859] pci 0000:00:1e.2: reg 1c 32bit mmio: [0xb0040400-0xb00404ff] [ 0.101899] pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold [ 0.101904] pci 0000:00:1e.2: PME# disabled [ 0.101944] pci 0000:00:1e.3: reg 10 io port: [0x2400-0x24ff] [ 0.101953] pci 0000:00:1e.3: reg 14 io port: [0x2000-0x207f] [ 0.102003] pci 0000:00:1e.3: PME# supported from D0 D3hot D3cold [ 0.102009] pci 0000:00:1e.3: PME# disabled [ 0.102099] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 0.102104] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO [ 0.102110] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0680-06ff [ 0.102115] pci 0000:00:1f.0: LPC Generic IO decode 2 PIO at 1640-164f [ 0.102146] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.102155] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.102164] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] [ 0.102173] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] [ 0.102182] pci 0000:00:1f.1: reg 20 io port: [0x1810-0x181f] [ 0.102262] pci 0000:00:1f.3: reg 20 io port: [0x18a0-0x18bf] [ 0.102370] pci 0000:00:1c.0: bridge io port: [0x3000-0x3fff] [ 0.102376] pci 0000:00:1c.0: bridge 32bit mmio: [0xb4000000-0xb7ffffff] [ 0.102385] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xd0000000-0xd3ffffff] [ 0.102442] pci 0000:02:05.0: reg 10 32bit mmio: [0xb8000000-0xb8001fff] [ 0.102480] pci 0000:02:05.0: reg 30 32bit mmio: [0x000000-0x00ffff] [ 0.102505] pci 0000:02:05.0: supports D1 D2 [ 0.102508] pci 0000:02:05.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.102514] pci 0000:02:05.0: PME# disabled [ 0.102565] pci 0000:02:07.0: reg 10 32bit mmio: [0xb8002000-0xb8002fff] [ 0.102636] pci 0000:02:07.0: PME# supported from D0 D3hot D3cold [ 0.102642] pci 0000:02:07.0: PME# disabled [ 0.102689] pci 0000:02:09.0: reg 10 32bit mmio: [0x0da000-0x0dafff] [ 0.102715] pci 0000:02:09.0: supports D1 D2 [ 0.102718] pci 0000:02:09.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.102724] pci 0000:02:09.0: PME# disabled [ 0.102769] pci 0000:02:09.1: reg 10 32bit mmio: [0xb8003000-0xb80037ff] [ 0.102831] pci 0000:02:09.1: PME# supported from D0 D3hot D3cold [ 0.102837] pci 0000:02:09.1: PME# disabled [ 0.102880] pci 0000:02:09.2: reg 10 32bit mmio: [0xb8003800-0xb80038ff] [ 0.102940] pci 0000:02:09.2: supports D1 D2 [ 0.102944] pci 0000:02:09.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.102950] pci 0000:02:09.2: PME# disabled [ 0.102995] pci 0000:02:09.3: reg 10 32bit mmio: [0xb8003c00-0xb8003cff] [ 0.103056] pci 0000:02:09.3: supports D1 D2 [ 0.103060] pci 0000:02:09.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.103065] pci 0000:02:09.3: PME# disabled [ 0.103122] pci 0000:00:1e.0: transparent bridge [ 0.103130] pci 0000:00:1e.0: bridge 32bit mmio: [0xb8000000-0xb80fffff] [ 0.103164] pci_bus 0000:00: on NUMA node 0 [ 0.103171] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.103432] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.103566] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 0.113770] ACPI: PCI Interrupt Link [LNKA] (IRQs *11) [ 0.113907] ACPI: PCI Interrupt Link [LNKB] (IRQs *10) [ 0.114041] ACPI: PCI Interrupt Link [LNKC] (IRQs *5) [ 0.114175] ACPI: PCI Interrupt Link [LNKD] (IRQs *5) [ 0.114309] ACPI: PCI Interrupt Link [LNKE] (IRQs *11) [ 0.114442] ACPI: PCI Interrupt Link [LNKF] (IRQs 10) *0, disabled. [ 0.114577] ACPI: PCI Interrupt Link [LNKG] (IRQs *5) [ 0.114711] ACPI: PCI Interrupt Link [LNKH] (IRQs *5) [ 0.114925] SCSI subsystem initialized [ 0.115020] usbcore: registered new interface driver usbfs [ 0.115042] usbcore: registered new interface driver hub [ 0.115076] usbcore: registered new device driver usb [ 0.115138] PCI: Using ACPI for IRQ routing [ 0.115334] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.115341] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.121298] AppArmor: AppArmor Filesystem Enabled [ 0.121316] pnp: PnP ACPI init [ 0.121327] ACPI: bus type pnp registered [ 0.124429] pnp: PnP ACPI: found 10 devices [ 0.124432] ACPI: ACPI bus type pnp unregistered [ 0.124438] PnPBIOS: Disabled by ACPI PNP [ 0.124451] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved [ 0.124455] system 00:01: iomem range 0xf0000000-0xf0003fff has been reserved [ 0.124460] system 00:01: iomem range 0xf0004000-0xf0004fff has been reserved [ 0.124464] system 00:01: iomem range 0xf0005000-0xf0005fff has been reserved [ 0.124468] system 00:01: iomem range 0xf0008000-0xf000bfff has been reserved [ 0.124472] system 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved [ 0.124482] system 00:06: ioport range 0x680-0x6df has been reserved [ 0.124486] system 00:06: ioport range 0x6f0-0x6ff has been reserved [ 0.124490] system 00:06: ioport range 0x800-0x80f has been reserved [ 0.124494] system 00:06: ioport range 0x900-0x90f has been reserved [ 0.124498] system 00:06: ioport range 0x1000-0x107f has been reserved [ 0.124502] system 00:06: ioport range 0x1180-0x11bf has been reserved [ 0.124506] system 00:06: ioport range 0x1640-0x164f has been reserved [ 0.159321] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01 [ 0.159327] pci 0000:00:1c.0: IO window: 0x3000-0x3fff [ 0.159334] pci 0000:00:1c.0: MEM window: 0xb4000000-0xb7ffffff [ 0.159341] pci 0000:00:1c.0: PREFETCH window: 0x000000d0000000-0x000000d3ffffff [ 0.159354] pci 0000:02:09.0: CardBus bridge, secondary bus 0000:03 [ 0.159357] pci 0000:02:09.0: IO window: 0x004000-0x0040ff [ 0.159363] pci 0000:02:09.0: IO window: 0x004400-0x0044ff [ 0.159369] pci 0000:02:09.0: PREFETCH window: 0x40000000-0x43ffffff [ 0.159375] pci 0000:02:09.0: MEM window: 0x48000000-0x4bffffff [ 0.159382] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 [ 0.159386] pci 0000:00:1e.0: IO window: 0x4000-0x4fff [ 0.159394] pci 0000:00:1e.0: MEM window: 0xb8000000-0xb80fffff [ 0.159400] pci 0000:00:1e.0: PREFETCH window: 0x40000000-0x45ffffff [ 0.159416] alloc irq_desc for 17 on node -1 [ 0.159419] alloc kstat_irqs on node -1 [ 0.159426] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.159433] pci 0000:00:1c.0: setting latency timer to 64 [ 0.159443] pci 0000:00:1e.0: setting latency timer to 64 [ 0.159508] pci 0000:02:09.0: power state changed by ACPI to D0 [ 0.159516] alloc irq_desc for 16 on node -1 [ 0.159519] alloc kstat_irqs on node -1 [ 0.159523] pci 0000:02:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.159532] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.159536] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.159540] pci_bus 0000:01: resource 0 io: [0x3000-0x3fff] [ 0.159544] pci_bus 0000:01: resource 1 mem: [0xb4000000-0xb7ffffff] [ 0.159547] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xd3ffffff] [ 0.159551] pci_bus 0000:02: resource 0 io: [0x4000-0x4fff] [ 0.159555] pci_bus 0000:02: resource 1 mem: [0xb8000000-0xb80fffff] [ 0.159559] pci_bus 0000:02: resource 2 pref mem [0x40000000-0x45ffffff] [ 0.159562] pci_bus 0000:02: resource 3 io: [0x00-0xffff] [ 0.159566] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff] [ 0.159570] pci_bus 0000:03: resource 0 io: [0x4000-0x40ff] [ 0.159573] pci_bus 0000:03: resource 1 io: [0x4400-0x44ff] [ 0.159577] pci_bus 0000:03: resource 2 pref mem [0x40000000-0x43ffffff] [ 0.159581] pci_bus 0000:03: resource 3 mem: [0x48000000-0x4bffffff] [ 0.159640] NET: Registered protocol family 2 [ 0.159756] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.160168] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.161075] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.161662] TCP: Hash tables configured (established 131072 bind 65536) [ 0.161667] TCP reno registered [ 0.161832] NET: Registered protocol family 1 [ 0.161928] Unpacking initramfs... [ 0.324742] Freeing initrd memory: 5323k freed [ 0.329048] Simple Boot Flag at 0x36 set to 0x1 [ 0.329228] Scanning for low memory corruption every 60 seconds [ 0.329464] audit: initializing netlink socket (disabled) [ 0.329494] type=2000 audit(1260724319.327:1): initialized [ 0.338017] highmem bounce pool size: 64 pages [ 0.338025] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.338135] VFS: Disk quotas dquot_6.5.2 [ 0.338179] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.338327] msgmni has been set to 433 [ 0.338444] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) [ 0.338449] io scheduler noop registered [ 0.338452] io scheduler anticipatory registered [ 0.338454] io scheduler deadline registered [ 0.338471] io scheduler cfq registered (default) [ 0.338555] pci 0000:00:02.0: Boot video device [ 0.338803] alloc irq_desc for 24 on node -1 [ 0.338806] alloc kstat_irqs on node -1 [ 0.338821] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X [ 0.338834] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 0.338963] pci-stub: invalid id string "" [ 0.339065] vesafb: framebuffer at 0xc0000000, mapped to 0xf7c80000, using 3072k, total 7872k [ 0.339069] vesafb: mode is 1024x768x16, linelength=2048, pages=4 [ 0.339073] vesafb: scrolling: redraw [ 0.339077] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 0.339312] bootsplash 3.1.6-2004/03/31: looking for picture... [ 0.356004] bootsplash: silentjpeg size 100573 bytes [ 0.356017] bootsplash: ...found (1024x768, 27393 bytes, v3). [ 0.388644] Console: switching to colour frame buffer device 124x44 [ 0.420778] fb0: VESA VGA frame buffer device [ 0.420858] isapnp: Scanning for PnP cards... [ 0.503992] Switched to high resolution mode on CPU 0 [ 0.731314] isapnp: No Plug & Play device found [ 0.733236] Non-volatile memory driver v1.3 [ 0.733241] Linux agpgart interface v0.103 [ 0.733277] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.733797] alloc irq_desc for 20 on node -1 [ 0.733801] alloc kstat_irqs on node -1 [ 0.733812] serial 0000:00:1e.3: PCI INT B -> GSI 20 (level, low) -> IRQ 20 [ 0.733821] serial 0000:00:1e.3: PCI INT B disabled [ 0.733937] Fixed MDIO Bus: probed [ 0.733994] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.736910] i8042.c: Detected active multiplexing controller, rev 1.1. [ 0.738329] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.738340] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 0.738344] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 0.738348] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 0.738351] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 0.738413] mice: PS/2 mouse device common for all mice [ 0.738565] cpuidle: using governor ladder [ 0.738569] cpuidle: using governor menu [ 0.813876] TCP cubic registered [ 0.813909] Using IPI No-Shortcut mode [ 0.813997] PM: Checking image partition /dev/disk/by-id/ata-HTS541080G9AT00_MP28MBXBGJJJ7H-part1 [ 0.828361] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.635660] Synaptics Touchpad, model: 1, fw: 6.1, id: 0x2580b1, caps: 0xa04713/0x200000 [ 1.670841] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input1 [ 1.862051] PM: Resume from disk failed. [ 1.862067] registered taskstats version 1 [ 1.862211] Magic number: 5:433:188 [ 1.862245] acpi device:1a: hash matches [ 1.862363] Freeing unused kernel memory: 460k freed [ 1.862672] Write protecting the kernel text: 4132k [ 1.862748] Write protecting the kernel read-only data: 2484k [ 1.899955] Marking TSC unstable due to TSC halts in idle [ 1.900037] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 1.900072] processor LNXCPU:00: registered as cooling_device0 [ 1.900077] ACPI: Processor [CPU0] (supports 2 throttling states) [ 1.904907] thermal LNXTHERM:01: registered as thermal_zone0 [ 1.904925] ACPI: Thermal Zone [THRM] (38 C) [ 1.907600] fan PNP0C0B:00: registered as cooling_device1 [ 1.907608] ACPI: Fan [FAN1] (on) [ 1.913210] udev: starting version 146 [ 1.939292] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.939339] alloc irq_desc for 23 on node -1 [ 1.939343] alloc kstat_irqs on node -1 [ 1.939353] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.939374] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.939379] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.939419] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 1.943346] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.943354] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 1.943377] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xb0040000 [ 2.007823] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 2.007864] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 2.065522] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 2.065586] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.065590] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.065594] usb usb1: Product: EHCI Host Controller [ 2.065597] usb usb1: Manufacturer: Linux 2.6.31.5-0.1-default ehci_hcd [ 2.065600] usb usb1: SerialNumber: 0000:00:1d.7 [ 2.065723] usb usb1: configuration #1 chosen from 1 choice [ 2.065762] hub 1-0:1.0: USB hub found [ 2.065774] hub 1-0:1.0: 8 ports detected [ 2.097986] uhci_hcd: USB Universal Host Controller Interface driver [ 2.098055] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 2.098067] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 2.098072] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.098087] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 2.098124] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820 [ 2.098183] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.098186] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.098190] usb usb2: Product: UHCI Host Controller [ 2.098193] usb usb2: Manufacturer: Linux 2.6.31.5-0.1-default uhci_hcd [ 2.098196] usb usb2: SerialNumber: 0000:00:1d.0 [ 2.098303] usb usb2: configuration #1 chosen from 1 choice [ 2.098342] hub 2-0:1.0: USB hub found [ 2.098351] hub 2-0:1.0: 2 ports detected [ 2.098416] alloc irq_desc for 19 on node -1 [ 2.098420] alloc kstat_irqs on node -1 [ 2.098429] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 2.098437] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 2.098441] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 2.098451] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 2.098490] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840 [ 2.098528] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.098532] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.098535] usb usb3: Product: UHCI Host Controller [ 2.098538] usb usb3: Manufacturer: Linux 2.6.31.5-0.1-default uhci_hcd [ 2.098541] usb usb3: SerialNumber: 0000:00:1d.1 [ 2.098611] usb usb3: configuration #1 chosen from 1 choice [ 2.098645] hub 3-0:1.0: USB hub found [ 2.098653] hub 3-0:1.0: 2 ports detected [ 2.098708] alloc irq_desc for 18 on node -1 [ 2.098710] alloc kstat_irqs on node -1 [ 2.098716] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2.098723] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 2.098727] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 2.098736] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 2.098772] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860 [ 2.098811] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.098814] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.098818] usb usb4: Product: UHCI Host Controller [ 2.098821] usb usb4: Manufacturer: Linux 2.6.31.5-0.1-default uhci_hcd [ 2.098824] usb usb4: SerialNumber: 0000:00:1d.2 [ 2.098898] usb usb4: configuration #1 chosen from 1 choice [ 2.098932] hub 4-0:1.0: USB hub found [ 2.098940] hub 4-0:1.0: 2 ports detected [ 2.098996] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 2.099006] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 2.099010] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 2.099023] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 2.099060] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880 [ 2.099098] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.099102] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.099105] usb usb5: Product: UHCI Host Controller [ 2.099108] usb usb5: Manufacturer: Linux 2.6.31.5-0.1-default uhci_hcd [ 2.099111] usb usb5: SerialNumber: 0000:00:1d.3 [ 2.099182] usb usb5: configuration #1 chosen from 1 choice [ 2.099216] hub 5-0:1.0: USB hub found [ 2.099224] hub 5-0:1.0: 2 ports detected [ 2.099857] libata version 3.00 loaded. [ 2.116342] ata_piix 0000:00:1f.1: version 2.13 [ 2.116366] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.116412] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 2.116645] scsi0 : ata_piix [ 2.116817] scsi1 : ata_piix [ 2.117831] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14 [ 2.117836] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15 [ 2.118188] ata2: port disabled. ignoring. [ 2.272228] ata1: clearing spurious IRQ [ 2.280630] ata1: clearing spurious IRQ [ 2.289031] ata1.00: failed to set max address (err_mask=0x1) [ 2.289035] ata1.00: device aborted resize (155490289 -> 156301488), skipping HPA handling [ 2.289042] ata1.00: ATA-6: HTS541080G9AT00, MB4OA60A, max UDMA/100 [ 2.289046] ata1.00: 155490289 sectors, multi 16: LBA48 [ 2.289087] ata1.01: ATAPI: DV-W28EA, S.0A, max UDMA/33 [ 2.289224] ata1: clearing spurious IRQ [ 2.296172] ata1: clearing spurious IRQ [ 2.304312] ata1.00: configured for UDMA/100 [ 2.304384] ata1: clearing spurious IRQ [ 2.312168] ata1: clearing spurious IRQ [ 2.320656] ata1.01: configured for UDMA/33 [ 2.321076] scsi 0:0:0:0: Direct-Access ATA HTS541080G9AT00 MB4O PQ: 0 ANSI: 5 [ 2.322629] scsi 0:0:1:0: CD-ROM TEAC DV-W28EA S.0A PQ: 0 ANSI: 5 [ 2.322841] sd 0:0:0:0: [sda] 155490289 512-byte logical blocks: (79.6 GB/74.1 GiB) [ 2.322908] sd 0:0:0:0: [sda] Write Protect is off [ 2.322912] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.322944] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.323102] sda: [ 2.376038] usb 1-3: new high speed USB device using ehci_hcd and address 2 [ 2.500024] Clocksource tsc unstable (delta = -347146651 ns) [ 2.511202] usb 1-3: New USB device found, idVendor=07ab, idProduct=fcf6 [ 2.511206] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.511210] usb 1-3: Product: DataBar USB2.0 [ 2.511213] usb 1-3: Manufacturer: SMI Corporation [ 2.511216] usb 1-3: SerialNumber: AA04012700353 [ 2.511295] usb 1-3: configuration #1 chosen from 1 choice [ 2.689731] sda1 sda2 sda3 [ 2.690870] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.031074] PM: Marking nosave pages: 000000000009f000 - 0000000000100000 [ 3.031081] PM: Basic memory bitmaps created [ 3.041935] PM: Basic memory bitmaps freed [ 3.101517] PM: Starting manual resume from disk [ 3.101522] PM: Resume from partition 8:1 [ 3.101524] PM: Checking hibernation image. [ 3.101775] PM: Resume from disk failed. [ 3.221037] EXT4-fs (sda3): barriers enabled [ 3.239555] kjournald2 starting: pid 244, dev sda3:8, commit interval 5 seconds [ 3.239836] EXT4-fs (sda3): internal journal on sda3:8 [ 3.239841] EXT4-fs (sda3): delayed allocation enabled [ 3.239845] EXT4-fs: file extents enabled [ 3.248539] EXT4-fs: mballoc enabled [ 3.248557] EXT4-fs (sda3): mounted filesystem with ordered data mode [ 5.272976] preloadtrace: systemtap: 0.9.9/0.142, base: f83b5000, memory: 34496+77436+11080+13600 data+text+ctx+net, probes: 34 [ 6.664419] udev: starting version 146 [ 6.693566] agpgart-intel 0000:00:00.0: Intel 915GM Chipset [ 6.694264] agpgart-intel 0000:00:00.0: detected 7932K stolen memory [ 6.696961] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000 [ 6.762109] intel_rng: FWH not detected [ 6.787167] iTCO_vendor_support: vendor-support=0 [ 6.788815] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 [ 6.788913] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060) [ 6.788982] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 6.792758] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 6.792795] scsi 0:0:1:0: Attached scsi generic sg1 type 5 [ 6.806652] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 6.806700] ACPI: Power Button [PWRF] [ 6.806773] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3 [ 6.806894] ACPI: Lid Switch [LID0] [ 6.806952] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4 [ 6.806992] ACPI: Power Button [PWRB] [ 6.807051] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5 [ 6.807080] ACPI: Sleep Button [SLPB] [ 6.809016] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 6.809023] ACPI: I/O resource 0000:00:1f.3 [0x18a0-0x18bf] conflicts with ACPI region SMBI [0x18a0-0x18af] [ 6.809337] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 6.816676] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 6.816683] Uniform CD-ROM driver Revision: 3.20 [ 6.816887] sr 0:0:1:0: Attached scsi CD-ROM sr0 [ 6.828440] Intel ICH Modem 0000:00:1e.3: PCI INT B -> GSI 20 (level, low) -> IRQ 20 [ 6.828474] Intel ICH Modem 0000:00:1e.3: setting latency timer to 64 [ 6.842547] Initializing USB Mass Storage driver... [ 6.852702] ACPI: AC Adapter [ADP1] (on-line) [ 6.859615] Intel ICH 0000:00:1e.2: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 6.859710] Intel ICH 0000:00:1e.2: setting latency timer to 64 [ 6.897915] ACPI: Battery Slot [BAT1] (battery present) [ 6.967643] lib80211: common routines for IEEE802.11 drivers [ 6.967648] lib80211_crypt: registered algorithm 'NULL' [ 6.972618] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 6.972622] ieee80211: Copyright (C) 2004-2005 Intel Corporation <[email protected]> [ 7.012133] scsi2 : SCSI emulation for USB Mass Storage devices [ 7.012283] usbcore: registered new interface driver usb-storage [ 7.012288] USB Mass Storage support registered. [ 7.037212] input: PC Speaker as /devices/platform/pcspkr/input/input6 [ 7.046709] usb-storage: device found at 2 [ 7.046712] usb-storage: waiting for device to settle before scanning [ 7.139834] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kdmprq [ 7.139839] ipw2200: Copyright(c) 2003-2006 Intel Corporation [ 7.139915] ipw2200 0000:02:07.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 7.166033] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection [ 7.166088] ipw2200 0000:02:07.0: firmware: requesting ipw2200-bss.fw [ 7.302484] ALSA /usr/src/packages/BUILD/kernel-default-2.6.31.5/linux-2.6.31/sound/pci/ac97/ac97_codec.c:2131: AC'97 0 analog subsections not ready [ 7.319497] sdhci: Secure Digital Host Controller Interface driver [ 7.319501] sdhci: Copyright(c) Pierre Ossman [ 7.335883] ipw2200: Detected geography ZZD (13 802.11bg channels, 0 802.11a channels) [ 7.336296] yenta_cardbus 0000:02:09.0: CardBus bridge found [144d:c01a] [ 7.464788] yenta_cardbus 0000:02:09.0: ISA IRQ mask 0x0cb8, PCI irq 16 [ 7.464795] yenta_cardbus 0000:02:09.0: Socket status: 30000006 [ 7.464803] yenta_cardbus 0000:02:09.0: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff [ 7.464808] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x4000-0x4fff: clean. [ 7.465074] yenta_cardbus 0000:02:09.0: pcmcia: parent PCI bridge Memory window: 0xb8000000 - 0xb80fffff [ 7.465079] yenta_cardbus 0000:02:09.0: pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x45ffffff [ 7.720131] alloc irq_desc for 22 on node -1 [ 7.720135] alloc kstat_irqs on node -1 [ 7.720144] b44 0000:02:05.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 7.724666] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. [ 7.726397] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 7.727147] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 7.727771] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 7.728869] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 7.784096] ssb: Sonics Silicon Backplane found on PCI device 0000:02:05.0 [ 7.784127] b44.c:v2.0 [ 7.784151] sdhci-pci 0000:02:09.2: SDHCI controller found [1180:0822] (rev 17) [ 7.784263] sdhci-pci 0000:02:09.2: power state changed by ACPI to D0 [ 7.784276] sdhci-pci 0000:02:09.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 7.784351] Registered led device: mmc0:: [ 7.784392] mmc0: SDHCI controller on PCI [0000:02:09.2] using PIO [ 7.784655] ohci1394 0000:02:09.1: power state changed by ACPI to D0 [ 7.784665] ohci1394 0000:02:09.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 7.804469] eth1: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:13:77:04:15:36 [ 7.842160] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[17] MMIO=[b8003000-b80037ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 7.876034] intel8x0_measure_ac97_clock: measured 63439 usecs (3055 samples) [ 7.876039] intel8x0: clocking to 48000 [ 8.045234] scsi 2:0:0:0: Direct-Access Freecom DataBar USB2.0 3000 PQ: 0 ANSI: 0 CCS [ 8.045432] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 8.045766] usb-storage: device scan complete [ 8.046452] sd 2:0:0:0: [sdb] 506880 512-byte logical blocks: (259 MB/247 MiB) [ 8.047458] sd 2:0:0:0: [sdb] Write Protect is off [ 8.047463] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 8.047466] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 8.050330] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 8.050527] sdb: sdb1 [ 8.053576] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 8.053773] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 8.393311] Adding 2104472k swap on /dev/sda1. Priority:-1 extents:1 across:2104472k [ 9.120182] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0000f041200773af] [ 9.239490] device-mapper: uevent: version 1.0.3 [ 9.239995] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: [email protected] [ 9.656765] loop: module loaded [ 9.685378] EXT4-fs (sda2): barriers enabled [ 9.687071] kjournald2 starting: pid 650, dev sda2:8, commit interval 5 seconds [ 9.687428] EXT4-fs (sda2): internal journal on sda2:8 [ 9.687433] EXT4-fs (sda2): delayed allocation enabled [ 9.687437] EXT4-fs: file extents enabled [ 9.690362] EXT4-fs: mballoc enabled [ 9.690383] EXT4-fs (sda2): mounted filesystem with ordered data mode [ 11.229064] NET: Registered protocol family 10 [ 11.229655] lo: Disabled Privacy Extensions [ 11.290728] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 11.458594] ip_tables: (C) 2000-2006 Netfilter Core Team [ 11.510764] nf_conntrack version 0.5.0 (15962 buckets, 63848 max) [ 11.510912] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 11.510920] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or [ 11.510927] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 14.201968] [drm] Initialized drm 1.1.0 20060810 [ 14.220980] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 14.220993] pci 0000:00:02.0: setting latency timer to 64 [ 14.225820] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 24.482538] powernow: This module only works with AMD K7 CPUs [ 26.170825] sr 0:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 26.170849] sr 0:0:1:0: [sr0] Sense Key : Illegal Request [current] [ 26.170871] Info fld=0x54c96, ILI [ 26.170880] sr 0:0:1:0: [sr0] Add. Sense: Illegal mode for this track [ 26.170905] end_request: I/O error, dev sr0, sector 1389144 [ 26.170920] Buffer I/O error on device sr0, logical block 173643 [ 26.208085] sr 0:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 26.208106] sr 0:0:1:0: [sr0] Sense Key : Illegal Request [current] [ 26.208127] Info fld=0x54c96, ILI [ 26.208136] sr 0:0:1:0: [sr0] Add. Sense: Illegal mode for this track [ 26.208159] end_request: I/O error, dev sr0, sector 1389144 [ 26.208173] Buffer I/O error on device sr0, logical block 173643 [ 26.244784] sr 0:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 26.244808] sr 0:0:1:0: [sr0] Sense Key : Illegal Request [current] [ 26.244830] Info fld=0x54c96, ILI [ 26.244839] sr 0:0:1:0: [sr0] Add. Sense: Illegal mode for this track [ 26.244862] end_request: I/O error, dev sr0, sector 1389144 [ 26.244878] Buffer I/O error on device sr0, logical block 173643 [ 26.281044] sr 0:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 26.281062] sr 0:0:1:0: [sr0] Sense Key : Illegal Request [current] [ 26.281074] Info fld=0x54c96, ILI [ 26.281080] sr 0:0:1:0: [sr0] Add. Sense: Illegal mode for this track [ 26.281093] end_request: I/O error, dev sr0, sector 1389144 [ 26.281102] Buffer I/O error on device sr0, logical block 173643 [ 26.299037] sr 0:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 26.299056] sr 0:0:1:0: [sr0] Sense Key : Illegal Request [current] [ 26.299068] Info fld=0x54c96, ILI [ 26.299074] sr 0:0:1:0: [sr0] Add. Sense: Illegal mode for this track [ 26.299087] end_request: I/O error, dev sr0, sector 1389144 [ 26.299097] Buffer I/O error on device sr0, logical block 173643 [ 26.334534] sr 0:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 26.334554] sr 0:0:1:0: [sr0] Sense Key : Illegal Request [current] [ 26.334566] Info fld=0x54c96, ILI [ 26.334572] sr 0:0:1:0: [sr0] Add. Sense: Illegal mode for this track [ 26.334586] end_request: I/O error, dev sr0, sector 1389144 [ 26.334596] Buffer I/O error on device sr0, logical block 173643 [ 26.369730] sr 0:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 26.369751] sr 0:0:1:0: [sr0] Sense Key : Illegal Request [current] [ 26.369763] Info fld=0x54c96, ILI [ 26.369769] sr 0:0:1:0: [sr0] Add. Sense: Illegal mode for this track [ 26.369783] end_request: I/O error, dev sr0, sector 1389144 [ 26.369793] Buffer I/O error on device sr0, logical block 173643 [ 26.522376] sr 0:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 26.522411] sr 0:0:1:0: [sr0] Sense Key : Illegal Request [current] [ 26.522436] Info fld=0x54c96, ILI [ 26.522448] sr 0:0:1:0: [sr0] Add. Sense: Illegal mode for this track [ 26.522475] end_request: I/O error, dev sr0, sector 1389144 [ 26.522494] Buffer I/O error on device sr0, logical block 173643 [ 26.555241] sr 0:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 26.555268] sr 0:0:1:0: [sr0] Sense Key : Illegal Request [current] [ 26.555291] Info fld=0x54c96, ILI [ 26.555304] sr 0:0:1:0: [sr0] Add. Sense: Illegal mode for this track [ 26.555329] end_request: I/O error, dev sr0, sector 1389144 [ 26.555347] Buffer I/O error on device sr0, logical block 173643 [ 29.561699] BIOS EDD facility v0.16 2004-Jun-25, 2 devices found [ 34.008843] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 34.070517] NET: Registered protocol family 17 [ 44.172067] eth0: no IPv6 routers present [ 237.048446] mtrr: no MTRR for c0000000,10000000 found sascha@linux-rkg2:~> --Boundary-00=_9vRJLFNpIP74CJt--