Re: dvd::rip - transcode
Jens Erich Beermann <je.beermann-S0/[email protected]>
| Newsgroups | gmane.linux.suse.multimedia.german |
|---|---|
| Message-ID | <[email protected]> |
Am Wednesday 11 February 2009 22:11:23 schrieb Manfred Tremmel: > Am Mittwoch 11 Februar 2009 schrieb Jens Erich Beermann: > > Ganz ähnlich wie die Probleme mit dvdwizard sieht es bei mir mit > > dvd::rip und dem Unterbau transcode aus. > > Muss aber was anderes sein. Ja. Im Anschluss die Ausgabe von transcode 1.1.0 und transcode 1.0.7 auf 2 verschiedenen Rechnern. Neue Frage: Wieso sucht transcode PCM Audio, die vobs haben normalen ac3 Ton. Wenn ich die genannten Transcode Aufrufe auf der Konsole starte kommt bei transcode 1.1.0: transcode v1.1.0 (C) 2001-2003 Thomas Oestreich, 2003-2009 Transcode Team libdvdread: Using libdvdcss version 1.2.9 for DVD access libdvdread: Couldn't find device name. libdvdnav:DVDOpenFilePath:findDVDFile /VIDEO_TS/VIDEO_TS.IFO failed libdvdnav:DVDOpenFilePath:findDVDFile /VIDEO_TS/VIDEO_TS.BUP failed libdvdread: Can't open file VIDEO_TS.IFO. libdvdread: Using libdvdcss version 1.2.9 for DVD access libdvdread: Couldn't find device name. libdvdnav:DVDOpenFilePath:findDVDFile /VIDEO_TS/VIDEO_TS.IFO failed libdvdnav:DVDOpenFilePath:findDVDFile /VIDEO_TS/VIDEO_TS.BUP failed libdvdread: Can't open file VIDEO_TS.IFO. [transcode] V: auto-probing | /home/jenbee/daten/dvdrip-data/schatz_zum_verlieben/vob/001/ (OK) [transcode] V: import format | MPEG 2 program stream in (module=vob) [transcode] A: auto-probing | /home/jenbee/daten/dvdrip-data/schatz_zum_verlieben/vob/001/ (OK) [transcode] A: import format | AC3 in (module=null) [transcode] V: AV demux/sync | (1) sync AV at initial MPEG sequence [transcode] V: import frame | 720x576 1.25:1 encoded @ 16:9 [transcode] V: zoom | 742x434 1.71:1 (Lanczos3) [transcode] V: clip frame (->) | 720x320 [transcode] V: bits/pixel | 0.356 [transcode] V: decoding fps,frc | 25.000,0 [transcode] V: multi-pass | (mode=1) writing data (pass 1) to divx4.log [transcode] V: video format | YUV420 (4:2:0) aka I420 [transcode] A: import format | 0x2000 AC3 [48000,16,2] 384 kbps [transcode] A: export | disabled [transcode] V: encoding fps,frc | 25.000,3 [transcode] A: bytes per frame | 7680 (7680.000000) [transcode] A: adjustment | 0@1000 [transcode] A: AV shift | -393326 ms [ -9833 (A) | -6 ms ] [transcode] V: IA32/AMD64 accel | sse 3dnowext 3dnow mmxext mmx cmove asm [transcode] V: video buffer | 10 @ 720x576 [0x2] [transcode] A: audio buffer | 10 @ 48000x2x16 [import_null.so] v0.2.0 (2002-01-19) (video) null | (audio) null [import_vob.so] v0.6.1 (2006-05-02) (video) MPEG-2 | (audio) MPEG/AC3/PCM | (subtitle) [export_null.so] v0.1.2 (2001-08-17) (video) null | (audio) null [export_xvid4.so] v0.0.6 (2007-08-11) (video) XviD 1.0.x series (aka API 4.0) | (audio) MPEG/AC3/PCM [import_vob.so] tccat -i "/home/jenbee/daten/dvdrip-data/schatz_zum_verlieben/vob/001/" -t vob -d 0 -S 121834 | tcdemux -s 0x81 -x mpeg2 -S 0 -M 1 -d 0 | tcextract -t vob -a 0 -x mpeg2 -d 0 | tcdecode -x mpeg2 -d 0 -y yuv420p [decode_mpeg2.c] libmpeg2 acceleration: 3dnow [audio_trans.c] critical: Sorry, only PCM audio is supported for processing [audio_trans.c] critical: Sorry, only PCM audio is supported for processing [audio_trans.c] critical: Sorry, only PCM audio is supported for processing [audio_trans.c] critical: Sorry, only PCM audio is supported for processing -------------------schnipp, viele 100 mal untereinander---------------------- Es sollte so aussehen (transcode 1.0.7, andere Hardware): transcode v1.0.7 (C) 2001-2003 Thomas Oestreich, 2003-2004 T. Bitterberg, 2004-2008 Transcode Team libdvdread: Using libdvdcss version 1.2.9 for DVD access libdvdread: Couldn't find device name. libdvdnav:DVDOpenFilePath:findDVDFile /VIDEO_TS/VIDEO_TS.IFO failed libdvdnav:DVDOpenFilePath:findDVDFile /VIDEO_TS/VIDEO_TS.BUP failed libdvdread: Can't open file VIDEO_TS.IFO. [transcode] (probe) suggested AV correction -D 2 (80 ms) | AV 112 ms | 32 ms [transcode] auto-probing source /home/jenbee/daten_jenbee/dvdrip-data/schatz_zum_verlieben/vob/001/ (ok) [transcode] V: import format | MPEG-2 (V=vob|A=null) [transcode] V: AV demux/sync | (1) sync AV at initial MPEG sequence [transcode] V: import frame | 720x576 1.25:1 encoded @ 16:9 [transcode] V: zoom | 732x430 1.70:1 (Lanczos3) [transcode] V: clip frame (->) | 720x320 [transcode] V: bits/pixel | 0.376 [transcode] V: decoding fps,frc | 25.000,0 [transcode] V: multi-pass | (mode=1) writing data (pass 1) to divx4.log [transcode] V: Y'CbCr | YV12/I420 [transcode] A: import format | 0x2001 AC3/A52 [48000,16,2] 384 kbps [transcode] A: export | disabled [transcode] V: encoding fps,frc | 25.000,3 [transcode] A: bytes per frame | 7680 (7680.000000) [transcode] A: adjustment | 0@1000 [transcode] V: IA32/AMD64 accel | sse (sse 3dnowext 3dnow mmxext mmx asm C) [transcode] V: IA32/AMD64 accel | using sse memcpy [transcode] V: video buffer | 10 @ 732x576 [import_null.so] v0.2.0 (2002-01-19) (video) null | (audio) null [import_vob.so] v0.6.0 (2003-10-02) (video) MPEG-2 | (audio) MPEG/AC3/PCM | (subtitle) [export_null.so] v0.1.2 (2001-08-17) (video) null | (audio) null [export_xvid4.so] v0.0.6 (2007-08-11) (video) XviD 1.0.x series (aka API 4.0) | (audio) MPEG/AC3/PCM [import_vob.so] tccat -i "/home/jenbee/daten_jenbee/dvdrip-data/schatz_zum_verlieben/vob/001/" -t vob -d 0 -S 0 | tcdemux -s 0x81 -x mpeg2 -S 0 -M 1 -d 0 | tcextract -t vob -a 0 -x mpeg2 -d 0 | tcdecode -x mpeg2 -d 0 -y yv12 [export_xvid4.so] Neither './xvid4.cfg' nor '~/.transcode/xvid4.cfg' [export_xvid4.so] found. Default settings will be used instead. [decode_mpeg2.c] libmpeg2 acceleration: 3dnow [encoder.c] Delaying audio (0) encoding frame [1425], 10.62 fps, 71.2%, ETA: 0:00:54, ( 8| 1| 0)