Re: NVIDIA driver problem

Just one more thing, that may or may not be obvious to you: after you install 
the kernel source rpm, make sure you run YOU to update it the same rpm 
version as your kernel's.

HTH

On Sunday 30 January 2005 08:31, Adalberto Castelo wrote:
> Bogi,
>
> Here's what you need:
>
> 1) install the kernel source rpm from SuSE.
> 2) go to /usr/src/linux (where the source should be when you use the suse
> rpms) and type
> 	$ make cloneconfig
> 	This will make sure that the config file used by make to create
> dependencies will match your current kernel's config.
> 3) type
> 	$ make prepare-all
> 4) make sure your system is in init 3 (go to a terminal and type init 3 as
> root, or type '3' on the suse splash screen that shows the boot menu
> (kernel, safe mode, etc.)
> 5) go back to where you have the .run pkg, type
> 	$ sh NVIDIA-etc-etc.run --kernel-source-path=/usr/src/linux
>
> I assume you can set up the XConfig file or have one already working.
>
> Now, do not mess with what is in /lib, unless you know what you're doing.
> And do not use kernel sources that do not match you kernel perfectly.
>
> That should get you going. Good luck.
>

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.5 (GNU/Linux)
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=Ok1t
-----END PGP SIGNATURE-----