openSUSE 12.3 and 11.1 PowerPC for the AmigaOne X1000

Hi All,

I've ported the openSUSE kernel 3.9.8.1 for openSUSE 12.3 and for 
openSUSE 11.1. I've done the following steps:

1) I have downloaded the openSUSE kernel sourcen
2) I have patched it with the 3.9.8 AmigaOne X1000 nemo patch
3) I have merged the openSUSE config with the AmigaOne X1000 kernel config

Download: 
http://www.xenosoft.de/kernel-3.9.8.1-x1000-opensuse-ppc64.tar.bz2

YaST2 works better with the openSUSE kernel especially the hardware 
configuration.

Installation instructions:

1) Download the openSUSE kernel: 
http://www.xenosoft.de/kernel-3.9.8.1-x1000-opensuse-ppc64.tar.bz2.
2) Copy the kernel "vmlinux-3.9.8.1-opensuse" to the CF card and the 
modules directory "3.9.8SuSE" to "/lib/modules".
3) Please reboot the AmigaOne X1000 and choose openSUSE 11.1 from the 
CFE boot menu.
4) Login as root and type: "depmod -a".
5) Start YaST2 and configure the hardware.

Thank you very much for the developing work on openSUSE PowerPC! :-)


All the best,
Christian Zigotzky
-- 
To unsubscribe, e-mail: [email protected]
To contact the owner, e-mail: [email protected]