Re: Re: ltsp still not working as advertised.....

"CyberOrg" <[email protected]> wrote:
> On Thu, Aug 14, 2008 at 4:37 PM, john-paul drawneek
> <[email protected]> wrote:
> 
>> Prebuilt are working - box is happily erroring out on the fact it can't
>> find tftp host - ping tftp from a real box and it finds it.
>>
>> usb - boots, then dies saying it can't find a usb drive.  What like the
one
>> you just booted from????
>>
>> Also why does the prebuilt images stop working when you make a usb
image?
>> Do i need to have multiply boxes running ltsp for each type of install?
> 
> This looks like a bug, copy back
> /srv/kiwi-ltsp.somebackup/ltsp-suse-11.0.i686-0.0.1 to /srv/kiwi-ltsp/

will do

> 
>>
>> the dhcpd config borks horribly with a random error - can't get it to
work
>> at all
>> so using dnsmasq, and fun that is to...
>>
> This seems to be one of your issues(misconfigured dnsmasq), we use
> dhcpd, let us know the errors you get so we can try to fix it.

only because I can't get dhcpd to work


> 
> Also paste output of ifconfig,

ifconfig
eth0      Link encap:Ethernet  HWaddr 00:14:22:72:E1:4B
          inet addr:192.168.9.53  Bcast:192.168.9.255  Mask:255.255.255.0
          inet6 addr: fe80::214:22ff:fe72:e14b/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:154427 errors:0 dropped:0 overruns:0 frame:0
          TX packets:21469 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100
          RX bytes:91140660 (86.9 Mb)  TX bytes:1802812 (1.7 Mb)

eth1      Link encap:Ethernet  HWaddr 00:0E:0C:83:F0:4D
          inet addr:192.168.8.102  Bcast:192.168.8.255  Mask:255.255.255.0
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

eth2      Link encap:Ethernet  HWaddr 00:14:22:72:E1:4C
          inet addr:192.168.100.1  Bcast:192.168.100.255 
Mask:255.255.255.0
          inet6 addr: fe80::214:22ff:fe72:e14c/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:402346 errors:0 dropped:0 overruns:0 frame:0
          TX packets:401279 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100
          RX bytes:24555074 (23.4 Mb)  TX bytes:581565649 (554.6 Mb)

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:369 errors:0 dropped:0 overruns:0 frame:0
          TX packets:369 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:39564 (38.6 Kb)  TX bytes:39564 (38.6 Kb)


> cat /etc/dhcpd.conf 

# dhcpd.conf.template - Part of KIWI-LTSP as created by Cyberorg
#
# Copyright (c) 2007 Cyberorg
# This program is free software; you can redistribute it and/or modify it
under
# the terms of the GNU General Public License as published by the Free
Software
# Foundation; either version 2 of the License, or (at your option) any
later
# version.
#
# This program is distributed in the hope that it will be useful, but
WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS
# FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
# details.
#
# You should have received a copy of the GNU General Public License along
with
# this program; if not, write to the Free Software Foundation, Inc., 59
Temple
# Place, Suite 330, Boston, MA 02111-1307 USA
#
# Authors: Cyberorg Cyberorg <[email protected]>
#         Magnus Boman <[email protected]>
#
# Version       Date            Changes
# 0.1           2007-08-25      Initial release

option domain-name "Computing.net";
option domain-name-servers 192.168.100.1;
option routers 192.168.100.1;
default-lease-time 14400;
ddns-update-style none;
next-server 192.168.100.1;
subnet 192.168.100.0 netmask 255.255.255.0 {
  range 192.168.100.100 192.168.100.200;
  default-lease-time 14400;
  max-lease-time 172800;
  filename "pxelinux.0";
}


> and
> /etc/sysconfig/dhcpd, to debug it.
## Path:        Network/DHCP/DHCP server
## Description: DHCP server settings
## Type:        string
## Default:     ""
## ServiceRestart: dhcpd
#
# Interface(s) for the DHCP server to listen on.
#
# A special keyword is ANY, it will cause dhcpd to autodetect available
# interfaces.
#
# Examples: DHCPD_INTERFACE="eth0"
#           DHCPD_INTERFACE="eth0 eth1 eth2 tr0 wlan0"
#           DHCPD_INTERFACE="internal0 internal1"
#           DHCPD_INTERFACE="ANY"
#
DHCPD_INTERFACE=eth2

## Type:        yesno
## Default:     yes
## ServiceRestart: dhcpd
#
# Shall the DHCP server dhcpd run in a chroot jail (/var/lib/dhcp)?
#
# Each time you start dhcpd with the init script, /etc/dhcpd.conf will
# be copied to /var/lib/dhcp/etc/.
#
# Some files that are important for hostname to IP address resolution
# (/etc/{hosts,host.conf,resolv.conf,localtime}, /lib/libnss_dns.so.2,
# /lib/libresolv.so.2) will also be copied to the chroot jail by the
# init script when you start it (about 100kB altogether).
#
# The pid file will be in /var/lib/dhcp/var/run/dhcpd.pid.
#
DHCPD_RUN_CHROOTED="yes"

## Type:        string
## Default:     ""
## ServiceRestart: dhcpd
#
# Since version 3, dhcpd.conf can contain include statements.
# If you enter the names of any include files here, _all_ conf
# files will be copied to $chroot/etc/, when dhcpd is started in the
# chroot jail. (/etc/dhcpd.conf is always copied.)
#
# For your convenience, you can also specify entire directories, like
# "/etc/dhcpd.conf.d".
#
# Example: "/etc/dhcpd.conf.shared /etc/dhcpd.conf.bootp-clients"
#
DHCPD_CONF_INCLUDE_FILES=""

## Type:        string
## Default:     "dhcpd"
## ServiceRestart: dhcpd
#
# Leave empty or enter "root" to let dhcpd run as root.
# Enter "dhcpd" to run dhcpd as user 'dhcpd'.
#
DHCPD_RUN_AS="dhcpd"

## Type:        string
## Default:     ""
## ServiceRestart: dhcpd
#
# Other arguments that you want dhcpd to be started with
# (e.g. "-p 1234" for a non-standard port to listen on)
#
DHCPD_OTHER_ARGS=""

## Type:        string
## Default:     ""
## ServiceRestart: dhcpd
#
# You may specify another dhcpd binary to be run.
# The full path needs to be specified.
#
# If empty, the default applies.
#
DHCPD_BINARY=""


/etc/init.d/dhcpd start
Starting DHCP server Internet Systems Consortium DHCP Server V3.0.6
Copyright 2004-2007 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/
/usr/sbin/dhcpd: : Unknown error 1701220736
                                                                     
failed


See nothing special, all pretty much default.

> 
> Things like "random errors", "not working" really does not help pin
> point the real cause :)

The error seem to be a random number generator - i get a different number
each time, even if theres been no change in the config

All I am doing is following your instructions, why should I have to list
them back to you?

> 
> Cheers
> 
> -J
> -- 
> To unsubscribe, e-mail: [email protected]
> For additional commands, e-mail: [email protected]
> 
>