RE: problem with my 10/100 sun heppy meal ethernet !

Hi

The Happy Meal in my Ultra 5 works fine with a standard install. 
I think that you may have a problem with the card or cable or hub/switch
port connected to your ultra 1, have you checked the cable and hub?

Also try another Ethernet card in the machine and see if that can be made to
work. 

hope this helps...

Andrew Hooper
>  -----Original Message-----
> From: 	pozzuoli <[email protected]>@VITALNETSVC  
> Sent:	22 April 2002 12:09
> To:	[email protected]
> Subject:	[suse-sparc] problem with my 10/100 sun heppy meal ethernet
> !
> 
>  <<...OLE_Obj...>> 
> Hi people! i' m working on two sun ULTRA 1 machine , but one of those is
> the
> creator type tath have a newest ethernet card sun heppy meal 10/100 !
> The other machine have the semply sun lance 10 Mbits and it work
> brilliant!
> THe problem of sun Happy meal is semply that the host that i wont ping is
> Unreachble !
> But now listen , if i type tcpdump ,the host with next ip address becames
> avalable , but it not all , infact the really problem is that also if i
> type
> tcpdump i still can' t reachable  the gatway of my network tath have still
> the same kind of ip address, and i can't go on the web or other
> application
> that need internet connection !
> I've made the same kind of installation for both machine, the same kind of
> pubblic internet address,  and i 've also repeat the istallation of
> incriminated computer , but the result is always the same i can't go
> further
> than my gatway !
> I've tried to recompile my kernel and i've add the proper driver for sun
> happy meal , and when the computer start anythig appear ok! the ethernet
> eth0
> is up , the kernel probe the network card, and all service is up network,
> rcroute ecc.
> I dont have any rule or policy for firewalling ! I' ve tried with also a
> RED
> HAT distibution but the problem is always the same !
> Have someone an idea about my problem ?
> Thank's a lot Gianfranco !
> 
> --
> To unsubscribe, e-mail: [email protected]
> For additional commands, e-mail: [email protected]
> 
> 
> 
> 
This message contains information which may be confidential and privileged.
The message is intended solely for the recipient and use by any other party
is not authorised.  If you have received the message in error, please
contact the sender immediately and delete it without forwarding or copying
it from your system.  Any views or opinions presented are solely those of
the author and do not necessarily represent those of VITAL Network Services
unless otherwise specifically stated. 



-- 
To unsubscribe, e-mail: [email protected]
For additional commands, e-mail: [email protected]