SuSe 7.3 - SparcLinux - PROMLIB: obio_ranges 5 : Inconsistent or unknown console

Hi !

I'm running an headless SPARCstation 10 with 64 MB DRAM.
I've connected a CD ROM player to the station, but when i'm trying to start
the installation of the SuSe 7.3, i'm receiving this error message on my
terminal connection.

"PROMLIB: obio_ranges 5
Inconsistent or unknown console"

I'm new with Sun material, could you help me ?

Regards,

Eric Paquay
[email protected]


Complete printscreen is here

----------------------------------------------------------------------------
----


ok boot cdrom
Resetting ...
ttya initialized
Cpu #0 TI,TMS390Z55
Cpu #1 Nothing there
Cpu #2 Nothing there
Cpu #3 Nothing there
Probing Memory Bank #0 16 Megabytes of DRAM
Probing Memory Bank #1 Nothing there
Probing Memory Bank #2 Nothing there
Probing Memory Bank #3 16 Megabytes of DRAM
Probing Memory Bank #4 Nothing there
Probing Memory Bank #5 Nothing there
Probing Memory Bank #6 16 Megabytes of DRAM
Probing Memory Bank #7 16 Megabytes of DRAM
Probing /iommu@f,e0000000/sbus@f,e0001000 at f,0  espdma esp sd st ledma le
SUNW,bpp SUNW,
DBRIe mmcodec
Probing /iommu@f,e0000000/sbus@f,e0001000 at 0,0  Nothing there
Probing /iommu@f,e0000000/sbus@f,e0001000 at 1,0  Nothing there
Probing /iommu@f,e0000000/sbus@f,e0001000 at 2,0  Nothing there
Probing /iommu@f,e0000000/sbus@f,e0001000 at 3,0  Nothing there
screen not found.
Cpu #0 TI,TMS390Z55
Cpu #1 Nothing there
Cpu #2 Nothing there
Cpu #3 Nothing there
Probing Memory Bank #0 16 Megabytes of DRAM
Probing Memory Bank #1 Nothing there
Probing Memory Bank #2 Nothing there
Probing Memory Bank #3 16 Megabytes of DRAM
Probing Memory Bank #4 Nothing there
Probing Memory Bank #5 Nothing there
Probing Memory Bank #6 16 Megabytes of DRAM
Probing Memory Bank #7 16 Megabytes of DRAM
Probing /iommu@f,e0000000/sbus@f,e0001000 at f,0  espdma esp sd st ledma le
SUNW,bpp SUNW,
DBRIe mmcodec
Probing /iommu@f,e0000000/sbus@f,e0001000 at 0,0  Nothing there
Probing /iommu@f,e0000000/sbus@f,e0001000 at 1,0  Nothing there
Probing /iommu@f,e0000000/sbus@f,e0001000 at 2,0  Nothing there
Probing /iommu@f,e0000000/sbus@f,e0001000 at 3,0  Nothing there

SPARCstation 10  (1 X 390Z55), Keyboard Present
ROM Rev. 2.12, 64 MB memory installed, Serial #3260878.
Ethernet address 8:0:20:1d:53:cf, Host ID: 7231c1ce.


Rebooting with command: cdrom
Boot device: /iommu/sbus/espdma@f,400000/esp@f,800000/sd@6,0:d   File and
args:
SILO

                      >>>>> SuSE Linux/SPARC 7.3 <<<<<
  =========================================================================

  You can type one of the following options here and press enter or wait
  for the timeout to start the installation with YaST2:

  yast2  - default, start the installation with YaST2.

  text   - start YaST2 in text mode

  manual - if you wish to load modules or make other changes before
           starting YaST2

  rescue - to start the rescue system. This does not work yet with a
           serial console

boot: text
Uncompressing image...
Loading initial ramdisk....
PROMLIB: obio_ranges 5
Inconsistent or unknown console
Program terminated
Type  help  for more information
ok


----------------------------------------------------------------------------
----