default boot device / Open boot 3.1.9 / Ultra Sparc 60

Dear listmembers,
does anyone know how to change the default boot device (Open Boot 3.1.9)?
Due to the fact that I am using a SCSI-Controler on the PCI-bus that is not
known at boot time, I have to boot from CDROM rather than from HDD. This is
no basic issue, but it would be helpful if one could avoid the irritation of
the system not booting apropriately by default if the boot-device could be
set accordingly.
Many thanks for your help in advance,
take care



Dieter Jurzitza


-- 
________________________________________________

HARMAN BECKER AUTOMOTIVE SYSTEMS

Dr.-Ing. Dieter Jurzitza
Manager Hardware Systems
         ESI

Industriegebiet Ittersbach
Becker-Göring Str. 16
D-76307 Karlsbad / Germany

Phone: +49 (0)7248 71-1577
Fax:   +49 (0)7248 71-1216
eMail: [email protected]
Internet: http://www.becker.de
 


*******************************************
Diese E-Mail enthaelt vertrauliche und/oder rechtlich geschuetzte Informationen. Wenn Sie nicht der richtige Adressat sind oder diese E-Mail irrtuemlich erhalten haben, informieren Sie bitte sofort den Absender und loeschen Sie diese Mail. Das unerlaubte Kopieren sowie die unbefugte Weitergabe dieser Mail ist nicht gestattet.
 
This e-mail may contain confidential and/or privileged information. If you are not the intended recipient (or have received this e-mail in error) please notify the sender immediately and delete this e-mail. Any unauthorised copying, disclosure or distribution of the contents in this e-mail is strictly forbidden.
*******************************************