Re: Support for kernel parameter NIC= in LTSP5 on Ubuntu?

Thanks for the information. Luckily I've had to deal only with boxes
that have two different chipsets, but I'll do more testing in the lab
with the solution you suggested.

Is the new nbd code already in Ubuntu repositories?

Veli-Matti Lintu

to, 2009-02-26 kello 09:28 -0500, Gideon Romm kirjoitti:
> Veli-Matti,
> 
> Your proposed fix will not work in most cases, because in most cases
> where the client has two onboard NICs, they will be controlled by a chip
> (or chips) with the same driver, so you still could get the problem you
> are seeing.
> 
> One workaround, for now, would be to add the following to your PXE
> kernel command line:
> 
> IPOPTS=:::::eth0
> 
> Then, simply by trial, figure out which of the two NICs comes up as eth0
> (while this is not always 100% consistent, it should work most of the
> time).
> 
> I have code written for Ubuntu NBD connection that tests with
> mii-tool/ethtool for the presence of a link and uses the NIC whose link
> is active.
> 
> Unfortunately, this code is Ubuntu NBD specific at the moment, so
> finding a way to introduce such code in a cross-distro compatible way
> would be best before pushing it upstream in LTSP.  In fact, it may be
> something more suitable to be pushed to a different upstream project.
> 
> HTH,
> 
> -Gadi
> 
> 
> On Thu, 2009-02-26 at 13:39 +0200, Veli-Matti Lintu wrote:
> > Hi,
> > 
> > LTSP 4.2 used to support kernel parameter NIC= to load specified module
> > for a nic as specified here:
> > 
> > http://wiki.ltsp.org/twiki/bin/view/Ltsp/KernelOptions
> > 
> > This is really useful feature in cases when using older pc hardware with
> > multiple nics that cannot be disabled from bios.
> > 
> > Without this setting this can happen:
> > 
> > * Thin client has two NICs: A and B (A is connected and B is not)
> > * NIC A initiates PXE and loads kernel and initrd
> > * kernel and initrd load first driver for NIC B and make it eth0
> > * initrd tries to run dhclient on eth0 using NIC B (this fails as NIC B
> > is not connected)
> > 
> > The old NIC= parameter made sure that module for NIC A was loaded first
> > in initrd.
> > 
> > I could not find any information about this feature for LTSP5 and none
> > of the source packages for Ubuntu Hardy seem to have it. I've been using
> > the patch below to add support for this in chroot's initrd scripts, but
> > if there's a better way to do it, I'd be glad to hear about it.
> > 


------------------------------------------------------------------------------
Open Source Business Conference (OSBC), March 24-25, 2009, San Francisco, CA
-OSBC tackles the biggest issue in open source: Open Sourcing the Enterprise
-Strategies to boost innovation and cut costs with open source participation
-Receive a $600 discount off the registration fee with the source code: SFAD
http://p.sf.net/sfu/XcvMzF8H
_____________________________________________________________________
Ltsp-developer mailing list.   To un-subscribe, or change prefs, goto:
      https://lists.sourceforge.net/lists/listinfo/ltsp-developer
For additional LTSP help,   try #ltsp channel on irc.freenode.net