X.Org fail on fat clients after update
Jan Hubený <[email protected]> Tue, 07 May 2019 08:29:15 +0200
| Newsgroups | gmane.linux.terminal-server.general |
|---|---|
| Message-ID | <51c7-5cd12580-8d-511d2f80@25311599> |
Hi,
we had a working set up where ltsp server is Ubuntu 18.04 LTS and we use fat clients on amd64 architecture. After last update (apt update && apt upgrade both in server and fat client chroot) we have problems with fat client boot. The X.Org server does not start properly. There are two errors in the attached X.Org.log (downloaded from fatclient)
(EE) systemd-logind: failed to get session: PID 852 does not belong to any known session
and
(EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
the priviledges of /dev/dri/card0 on the fat client are
# ls -l /dev/dri/card0
crw-rw---- 1 root video 226, 0 kvě 7 07:04 /dev/dri/card0
the X server on the fat client is running after boot
# ps aux | grep X
root 720 0.0 0.0 22624 1260 tty7 S+ 07:04 0:00 xinit /usr/share/ltsp/xinitrc /usr/sbin/ldm -- :7 vt7 -auth /var/run/ldm-xauth-7LapVwqYZ/Xauthority -listen tcp -config /var/run/ltsp-xorg.conf -depth 24 -br
root 852 0.6 0.4 636620 38636 tty7 S<l 07:04 0:16 /usr/lib/xorg/Xorg :7 vt7 -auth /var/run/ldm-xauth-7LapVwqYZ/Xauthority -listen tcp -config /var/run/ltsp-xorg.conf -depth 24 -br
root 1556 0.0 0.0 13440 1044 pts/0 S+ 07:47 0:00 grep X
However the screen is blank and the LCD monitor show error message, correct the dynamic range, maximum is 1920x1200 @ 60Hz.
Can anybody help with this issue?
Thank you in advance,
Jan Hubený
Visit SOMA Flexo Challenge Conference 2019
D I S C L A I M E R
Personal data protection according to Regulation (EU) 2016/679 of the European Parliament and of the Council of 27 April 2016 on the protection of natural persons with regard to the processing of personal data and on the free movement of such data (General Data Protection Regulation)
By e-mail communication with this e-mail address (especially by sending e-mails and replies) you hereby agree with processing of yours personal data especially in the scope of data contained in email and it`s attachments. Data subject has the following rights: (i) to withdraw consent with personal data processing , (ii) to ask SOMA company for information which personal data are being processed, (iii) to ask for explanation
regarding processed personal data, (iv) to ask for access to personal data and right of rectification of inaccurate personal data, (v) to demand erasure of personal data, (iv) in case of do
ubts regarding compliance with GDPR regulation right to raise objections in front of SOMA company, court or the Office for personal data protection.
The SOMA company processes especially personal data of SOMA company`s business partners. The SOMA company hereby politely asks it`s business partners to not to send to SOMA company by e-mails or by any other means personal data of any third persons (for instance business partners` employees, participants of agreements, contracts or other legal relationships etc.), these personal data will not be processed by SOMA company and will be immediately erased. If you are not a business partner of SOMA company and you are sending to SOMA company any personal data in any kind of form (for instance by e-mail, data mailbox or by letter etc.) you hereb
y agree with processing of your personal data in the scope of personal data sent by you and you have right described in point (i) to (vi) hereof.
The SOMA company is processing personal d
ata especially due to the following purposes: (a) processing is necessary for the performance of a contract to which the data subject is party or in order to take steps at the request of the data subject prior to entering into a contract, or (b) processing is necessary for compliance with a legal obligation to which the controller is subject, or (c) processing is necessary in order to protect the vital interests of the data subject or of another natural person; or (d) processing is necessary for the purposes of the legitimate interests pursued by the controller or by a third party.
Data subject is obliged to announce the SOMA company any changes of personal data of the data subject.
Confidentiality
The information contained in this e-mail is confidential and is intended solely
for the use of subject to whom it is addressed and others authorized to receive it. The text or attachments may contain confidential information, privileged information or information consid
ered by the law firm as the trade secret. If you are not the intended recipient you are hereby notified that any disclosure, copying, distribution or taking any action in reliance on the contents of this information is strictly prohibited and may be unlawful. The law firm is neither liable for the contents, nor for the proper, complete and timely transmission of the information contained in this communication. By usage of e-mail communication the recipient of this e-mail agree this kind of communication with law firm and his potential risk and agree with unsecured communication. For avoidance of any doubt law firm pays attention to the fact that this e-mail including its attachments could not be in any case considered as offer for conclusion of agreement pursuant to § 1731 of act no
89/2012 Coll. as amended, neither confirmation letter pursuant to the § 1757 of act no 89/2012 Coll. as amended.
Our full GDPR policy may be found on www.soma-eng.com/en/gdpr
=0
APřeklad výše uvedeného textu (Ochrana osobních údajů dle nařízení Evropského parlamentu a Rady EU a Důvěrnost informací) naleznete na www.soma-eng.com/cs/disclaimer
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.freenode.net
Xorg.7.log
(text/x-log, 19.4 KB)
[ 15.117] X.Org X Server 1.19.6 Release Date: 2017-12-20 [ 15.117] X Protocol Version 11, Revision 0 [ 15.117] Build Operating System: Linux 4.4.0-138-generic x86_64 Ubuntu [ 15.117] Current Operating System: Linux pcobyvak.hubeni.local 4.15.0-48-generic #51-Ubuntu SMP Wed Apr 3 08:28:49 UTC 2019 x86_64 [ 15.117] Kernel command line: BOOT_IMAGE=vmlinuz-4.15.0-48-generic ro initrd=initrd.img-4.15.0-48-generic init=/sbin/init-ltsp forcepae root=/dev/nbd0 BOOTIF=01-00-01-2e-82-87-78 [ 15.117] Build Date: 25 October 2018 04:11:27PM [ 15.117] xorg-server 2:1.19.6-1ubuntu4.2 (For technical support please see http://www.ubuntu.com/support) [ 15.117] Current version of pixman: 0.34.0 [ 15.117] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 15.117] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 15.118] (==) Log file: "/var/log/Xorg.7.log", Time: Tue May 7 07:04:35 2019 [ 15.122] (++) Using config file: "/var/run/ltsp-xorg.conf" [ 15.122] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 15.126] (==) No Layout section. Using the first Screen section. [ 15.126] (**) |-->Screen "Screen0" (0) [ 15.126] (**) | |-->Monitor "Monitor0" [ 15.127] (==) No device specified for screen "Screen0". Using the first device section listed. [ 15.127] (**) | |-->Device "Intel Graphics" [ 15.127] (==) Automatically adding devices [ 15.127] (==) Automatically enabling devices [ 15.127] (==) Automatically adding GPU devices [ 15.127] (==) Automatically binding GPU devices [ 15.127] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 15.139] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 15.139] Entry deleted from font path. [ 15.139] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. [ 15.139] Entry deleted from font path. [ 15.139] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 15.139] Entry deleted from font path. [ 15.146] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. [ 15.146] Entry deleted from font path. [ 15.146] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 15.146] Entry deleted from font path. [ 15.146] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/Type1, built-ins [ 15.146] (==) ModulePath set to "/usr/lib/xorg/modules" [ 15.146] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 15.146] (II) Loader magic: 0x5564263e1020 [ 15.146] (II) Module ABI versions: [ 15.146] X.Org ANSI C Emulation: 0.4 [ 15.146] X.Org Video Driver: 23.0 [ 15.146] X.Org XInput driver : 24.1 [ 15.146] X.Org Server Extension : 10.0 [ 15.147] (++) using VT number 7 [ 15.147] (--) controlling tty is VT number 7, auto-enabling KeepTty [ 15.147] (EE) systemd-logind: failed to get session: PID 852 does not belong to any known session [ 15.151] (--) PCI:*(0:0:2:0) 8086:5a85:19da:b325 rev 11, Mem @ 0x90000000/16777216, 0x80000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072 [ 15.151] (II) LoadModule: "glx" [ 15.152] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 15.183] (II) Module glx: vendor="X.Org Foundation" [ 15.183] compiled for 1.19.6, module version = 1.0.0 [ 15.183] ABI class: X.Org Server Extension, version 10.0 [ 15.183] (II) LoadModule: "intel" [ 15.183] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 15.199] (II) Module intel: vendor="X.Org Foundation" [ 15.199] compiled for 1.19.5, module version = 2.99.917 [ 15.199] Module class: X.Org Video Driver [ 15.199] ABI class: X.Org Video Driver, version 23.0 [ 15.199] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43 [ 15.199] (II) intel: Driver for Intel(R) HD Graphics [ 15.199] (II) intel: Driver for Intel(R) Iris(TM) Graphics [ 15.199] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics [ 15.205] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20171023 [ 15.205] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.917+git20171229-1 (Timo Aaltonen <[email protected]>) [ 15.205] (II) intel(0): SNA compiled for use with valgrind [ 15.232] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 500 [ 15.232] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2; using a maximum of 4 threads [ 15.232] (++) intel(0): Depth 24, (--) framebuffer bpp 32 [ 15.232] (==) intel(0): RGB weight 888 [ 15.232] (==) intel(0): Default visual is TrueColor [ 15.232] (**) intel(0): Option "AccelMethod" "sna" [ 15.232] (**) intel(0): Option "DRI" "3" [ 15.232] (**) intel(0): Option "TripleBuffer" "true" [ 15.232] (**) intel(0): Option "TearFree" "true" [ 15.246] (II) intel(0): Output DP1 using monitor section Monitor0 [ 15.246] (II) intel(0): Enabled output DP1 [ 15.246] (II) intel(0): Output DP2 has no monitor section [ 15.246] (II) intel(0): Enabled output DP2 [ 15.246] (II) intel(0): Output HDMI1 has no monitor section [ 15.247] (II) intel(0): Enabled output HDMI1 [ 15.247] (--) intel(0): Using a maximum size of 256x256 for hardware cursors [ 15.247] (II) intel(0): Output VIRTUAL1 has no monitor section [ 15.247] (II) intel(0): Enabled output VIRTUAL1 [ 15.247] (--) intel(0): Output DP2 using initial mode 1920x1200 on pipe 0 [ 15.247] (**) intel(0): TearFree enabled [ 15.247] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0) [ 15.247] (==) intel(0): DPI set to (96, 96) [ 15.247] (II) Loading sub module "dri3" [ 15.247] (II) LoadModule: "dri3" [ 15.247] (II) Module "dri3" already built-in [ 15.247] (II) Loading sub module "dri2" [ 15.247] (II) LoadModule: "dri2" [ 15.247] (II) Module "dri2" already built-in [ 15.247] (II) Loading sub module "present" [ 15.247] (II) LoadModule: "present" [ 15.247] (II) Module "present" already built-in [ 15.247] (==) Depth 24 pixmap format is 32 bpp [ 15.272] (II) intel(0): SNA initialized with Broxton (gen9) backend [ 15.272] (==) intel(0): Backing store enabled [ 15.272] (==) intel(0): Silken mouse enabled [ 15.272] (II) intel(0): HW Cursor enabled [ 15.272] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 15.273] (==) intel(0): DPMS enabled [ 15.273] (==) intel(0): Display hotplug detection enabled [ 15.273] (II) intel(0): [DRI2] Setup complete [ 15.273] (II) intel(0): [DRI2] DRI driver: i965 [ 15.273] (II) intel(0): [DRI2] VDPAU driver: va_gl [ 15.273] (II) intel(0): direct rendering: DRI2 DRI3 enabled [ 15.273] (II) intel(0): hardware support for Present enabled [ 15.273] (--) RandR disabled [ 15.281] (II) SELinux: Disabled on system [ 15.410] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 15.410] (II) AIGLX: enabled GLX_ARB_create_context [ 15.410] (II) AIGLX: enabled GLX_ARB_create_context_profile [ 15.410] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile [ 15.410] (II) AIGLX: enabled GLX_INTEL_swap_event [ 15.410] (II) AIGLX: enabled GLX_SGI_swap_control [ 15.410] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB [ 15.410] (II) AIGLX: enabled GLX_ARB_fbconfig_float [ 15.410] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float [ 15.410] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 15.410] (II) AIGLX: enabled GLX_ARB_create_context_robustness [ 15.411] (II) AIGLX: Loaded and initialized i965 [ 15.411] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 15.417] (II) intel(0): switch to mode [email protected] on DP2 using pipe 0, position (0, 0), rotation normal, reflection none [ 15.431] (II) intel(0): Setting screen physical size to 508 x 317 [ 15.567] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 15.567] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 15.567] (II) LoadModule: "libinput" [ 15.568] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so [ 15.585] (II) Module libinput: vendor="X.Org Foundation" [ 15.585] compiled for 1.19.6, module version = 0.27.1 [ 15.585] Module class: X.Org XInput Driver [ 15.585] ABI class: X.Org XInput driver, version 24.1 [ 15.585] (II) Using input driver 'libinput' for 'Power Button' [ 15.585] (**) Power Button: always reports core events [ 15.585] (**) Option "Device" "/dev/input/event1" [ 15.585] (**) Option "_source" "server/udev" [ 15.585] (II) event1 - Power Button: is tagged by udev as: Keyboard [ 15.586] (II) event1 - Power Button: device is a keyboard [ 15.586] (II) event1 - Power Button: device removed [ 15.600] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1" [ 15.600] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 15.600] (**) Option "xkb_model" "pc105" [ 15.600] (**) Option "xkb_layout" "us" [ 15.601] (II) event1 - Power Button: is tagged by udev as: Keyboard [ 15.601] (II) event1 - Power Button: device is a keyboard [ 15.602] (II) config/udev: Adding input device Video Bus (/dev/input/event4) [ 15.602] (**) Video Bus: Applying InputClass "libinput keyboard catchall" [ 15.602] (II) Using input driver 'libinput' for 'Video Bus' [ 15.602] (**) Video Bus: always reports core events [ 15.602] (**) Option "Device" "/dev/input/event4" [ 15.602] (**) Option "_source" "server/udev" [ 15.603] (II) event4 - Video Bus: is tagged by udev as: Keyboard [ 15.603] (II) event4 - Video Bus: device is a keyboard [ 15.603] (II) event4 - Video Bus: device removed [ 15.640] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7/event4" [ 15.640] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 15.640] (**) Option "xkb_model" "pc105" [ 15.640] (**) Option "xkb_layout" "us" [ 15.641] (II) event4 - Video Bus: is tagged by udev as: Keyboard [ 15.641] (II) event4 - Video Bus: device is a keyboard [ 15.642] (II) config/udev: Adding input device Power Button (/dev/input/event0) [ 15.642] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 15.642] (II) Using input driver 'libinput' for 'Power Button' [ 15.642] (**) Power Button: always reports core events [ 15.642] (**) Option "Device" "/dev/input/event0" [ 15.642] (**) Option "_source" "server/udev" [ 15.643] (II) event0 - Power Button: is tagged by udev as: Keyboard [ 15.643] (II) event0 - Power Button: device is a keyboard [ 15.643] (II) event0 - Power Button: device removed [ 15.652] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0" [ 15.652] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8) [ 15.652] (**) Option "xkb_model" "pc105" [ 15.652] (**) Option "xkb_layout" "us" [ 15.653] (II) event0 - Power Button: is tagged by udev as: Keyboard [ 15.653] (II) event0 - Power Button: device is a keyboard [ 15.654] (II) config/udev: Adding drm device (/dev/dri/card0) [ 15.654] (II) xfree86: Adding drm device (/dev/dri/card0) [ 15.654] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied [ 15.655] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event7) [ 15.655] (II) No input driver specified, ignoring this device. [ 15.655] (II) This device may have been added with another device file. [ 15.656] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event8) [ 15.656] (II) No input driver specified, ignoring this device. [ 15.656] (II) This device may have been added with another device file. [ 15.657] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event9) [ 15.657] (II) No input driver specified, ignoring this device. [ 15.657] (II) This device may have been added with another device file. [ 15.658] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event10) [ 15.658] (II) No input driver specified, ignoring this device. [ 15.658] (II) This device may have been added with another device file. [ 15.658] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=10 (/dev/input/event11) [ 15.658] (II) No input driver specified, ignoring this device. [ 15.658] (II) This device may have been added with another device file. [ 15.659] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event5) [ 15.659] (II) No input driver specified, ignoring this device. [ 15.659] (II) This device may have been added with another device file. [ 15.660] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event6) [ 15.660] (II) No input driver specified, ignoring this device. [ 15.660] (II) This device may have been added with another device file. [ 15.661] (II) config/udev: Adding input device DELL DELL USB Keyboard (/dev/input/event2) [ 15.661] (**) DELL DELL USB Keyboard: Applying InputClass "libinput keyboard catchall" [ 15.661] (II) Using input driver 'libinput' for 'DELL DELL USB Keyboard' [ 15.661] (**) DELL DELL USB Keyboard: always reports core events [ 15.661] (**) Option "Device" "/dev/input/event2" [ 15.661] (**) Option "_source" "server/udev" [ 15.662] (II) event2 - DELL DELL USB Keyboard: is tagged by udev as: Keyboard [ 15.662] (II) event2 - DELL DELL USB Keyboard: device is a keyboard [ 15.662] (II) event2 - DELL DELL USB Keyboard: device removed [ 15.676] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/usb1/1-7/1-7:1.0/0003:413C:2005.0001/input/input5/event2" [ 15.676] (II) XINPUT: Adding extended input device "DELL DELL USB Keyboard" (type: KEYBOARD, id 9) [ 15.676] (**) Option "xkb_model" "pc105" [ 15.676] (**) Option "xkb_layout" "us" [ 15.677] (II) event2 - DELL DELL USB Keyboard: is tagged by udev as: Keyboard [ 15.677] (II) event2 - DELL DELL USB Keyboard: device is a keyboard [ 15.679] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event3) [ 15.679] (**) Logitech USB Optical Mouse: Applying InputClass "libinput pointer catchall" [ 15.679] (II) Using input driver 'libinput' for 'Logitech USB Optical Mouse' [ 15.679] (**) Logitech USB Optical Mouse: always reports core events [ 15.679] (**) Option "Device" "/dev/input/event3" [ 15.679] (**) Option "_source" "server/udev" [ 15.737] (II) event3 - Logitech USB Optical Mouse: is tagged by udev as: Mouse [ 15.737] (II) event3 - Logitech USB Optical Mouse: device set to 1000 DPI [ 15.737] (II) event3 - Logitech USB Optical Mouse: device is a pointer [ 15.737] (II) event3 - Logitech USB Optical Mouse: device removed [ 15.772] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/usb1/1-8/1-8:1.0/0003:046D:C046.0002/input/input6/event3" [ 15.772] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 10) [ 15.773] (**) Option "AccelerationScheme" "none" [ 15.773] (**) Logitech USB Optical Mouse: (accel) selected scheme none/0 [ 15.773] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000 [ 15.773] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4 [ 15.833] (II) event3 - Logitech USB Optical Mouse: is tagged by udev as: Mouse [ 15.833] (II) event3 - Logitech USB Optical Mouse: device set to 1000 DPI [ 15.833] (II) event3 - Logitech USB Optical Mouse: device is a pointer [ 15.835] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0) [ 15.835] (II) No input driver specified, ignoring this device. [ 15.835] (II) This device may have been added with another device file. [ 15.887] (II) config/udev: removing GPU device /sys/devices/pci0000:00/0000:00:02.0/drm/card0 /dev/dri/card0 [ 15.887] (II) config/udev: Adding drm device (/dev/dri/card0) [ 15.888] (II) xfree86: Adding drm device (/dev/dri/card0) [ 15.888] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied [ 15.890] (II) config/udev: removing device Video Bus [ 15.890] (II) event4 - Video Bus: device removed [ 15.932] (II) UnloadModule: "libinput" [ 15.933] (II) config/udev: Adding input device Video Bus (/dev/input/event4) [ 15.933] (**) Video Bus: Applying InputClass "libinput keyboard catchall" [ 15.933] (II) Using input driver 'libinput' for 'Video Bus' [ 15.933] (**) Video Bus: always reports core events [ 15.933] (**) Option "Device" "/dev/input/event4" [ 15.933] (**) Option "_source" "server/udev" [ 15.935] (II) event4 - Video Bus: is tagged by udev as: Keyboard [ 15.935] (II) event4 - Video Bus: device is a keyboard [ 15.935] (II) event4 - Video Bus: device removed [ 15.980] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7/event4" [ 15.980] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 15.980] (**) Option "xkb_model" "pc105" [ 15.980] (**) Option "xkb_layout" "us" [ 15.980] (WW) Option "xkb_variant" requires a string value [ 15.980] (WW) Option "xkb_options" requires a string value [ 15.982] (II) event4 - Video Bus: is tagged by udev as: Keyboard [ 15.982] (II) event4 - Video Bus: device is a keyboard [ 15.984] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=10 (/dev/input/event11) [ 15.984] (II) No input driver specified, ignoring this device. [ 15.984] (II) This device may have been added with another device file. [ 15.985] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event10) [ 15.985] (II) No input driver specified, ignoring this device. [ 15.985] (II) This device may have been added with another device file. [ 15.985] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event9) [ 15.986] (II) No input driver specified, ignoring this device. [ 15.986] (II) This device may have been added with another device file. [ 15.986] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event5) [ 15.986] (II) No input driver specified, ignoring this device. [ 15.986] (II) This device may have been added with another device file. [ 15.986] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event6) [ 15.986] (II) No input driver specified, ignoring this device. [ 15.986] (II) This device may have been added with another device file. [ 15.987] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event7) [ 15.987] (II) No input driver specified, ignoring this device. [ 15.987] (II) This device may have been added with another device file. [ 15.987] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event8) [ 15.987] (II) No input driver specified, ignoring this device. [ 15.987] (II) This device may have been added with another device file.