trying to use IBM EtherJet 10/100 cardbus

Has anyone gotten an IBM EtherJet? 10/100 card working with tomsrtbt? I've read the following post, which makes it sound possible: http://not.toms.net/tomsrtbt/2501/msg02073.html as does this: http://www.mobilix.org/pcmcia_ci10130.html although other pages are less encouraging, like: http://pcmcia-cs.sourceforge.net/ftp/SUPPORTED.CARDS

Here's what I've tried:

I unpacked tomsrtbt 1.0.103

I put the following files from /addons into 2/lib/modules/

    * cardbus.o
    * cb_enabler.o
    * tulip_cb.o

I added these lines in 2/etc/pcmcia/config:

   card "IBM 10/100 EtherJet CardBus"
     manfid 0x00a4, 0x0113
     bind "tulip_cb"

I ran buildit, and booted my thinkpad with the resulting disk.

When I remove the card, I see this message:

cs: cb_alloc(bus 5): vendor 0x115d, device 0x0003

Then when I replace the card, I see:

Nov 21 16:12:00 cardmgr[25]: unsupported card in socket 1
Nov 21 16:12:00 cardmgr[25]:  product info: "IBM", "10/100 EtherJet CardBus", "IBMC-10/100", "1.04"
Nov 21 16:12:00 cardmgr[25]:  manfid: 0x00a4, 0x0113  function: 6 (network)
Nov 21 16:12:00 cardmgr[25]:  PCI id: 0x115d, 0x0003

(These are the same messages I saw when using the unmodified disk.)

I must be missing something. Presumably the module works, or Tom wouldn't have included it in /addons. Any suggestions? Also, please pardon me for cross-posting; I got no replies on the Wiki last week.

Thanks for any pointers!

-J'n

-- 
_______________________________________________
Get your free email from http://mail.usa.com