RE: Trying to run uClinux-2.4.27-uc1...

Patrick m,
I have tried to contact Actiontec but they arent any help. Wondering if
you could help. My modem constantly locks up when in use and idle. I
have to reset it to get it to work again. Any ideas?
KLM

-----Original Message-----
From: actionhack-bounces-W7/[email protected]
[mailto:actionhack-bounces-W7/[email protected]] On Behalf Of Patrick McNamara
Sent: Tuesday, January 04, 2005 2:12 PM
To: ActionHack Collaboration
Subject: Re: [actionhack] Trying to run uClinux-2.4.27-uc1...


Nobody here but us chickens...

It may be a couple of days, but when I get a chance I'll dust off my
board and see what I can tell you.

Patrick M

--- Johann Hanne <[email protected]> wrote:

> Hi everybody (if there's still somebody),
> 
> i'm currently trying to get uClinux-2.4.27-uc1 running on my DPCM. 
> Most of the cx82100 is already in the stock distribution. 
> Additionally, I've put in most armnommu stuff which differed between 
> uClinux-2.4.6.0pre1 and the kernel released by Actiontec (including 
> Bruce's files) and also the emac driver. It does compile so far, but 
> it does not run. The big problem is that I do not own a devlopment 
> board, so I can't look at the serial port for any boot messages.
> 
> So please, can anybody grab my kernel at
> http://www.bettina-attack.de/jonny/linuz
> and look if it does at least outputs some lines. If so, I would have
> something 
> to start with and I'd try to order the parts for the dev board. I'm
living in
> 
> Germany and it would be quite expensive due to shipping and import tax

> for
> all the parts. Maybe somebody can help me with that, I'd also like to
have a 
> second DPCM and it would be much cheaper to get it shipped in one
package 
> (also with the 110V power supply removed, it's useles here).
> 
> As already noted, the kernel does NOT boot the board completely. 
> However, it
> did not kill the board, i.e. I was able to recover the board with the 
> original kernel with the usual hold-button/tftp procedure. But this
does not 
> mean that it doesn't kill YOUR board, so before you try it out, make
sure you
> 
> have the USB recovery stuff working. You have been warned.
> 
> Thanks in advance,
>   Johann
> __
> actionhack Mailing List - actionhack-W7/[email protected] 
> http://www.express.org/mailman/listinfo/actionhack
> http://www.embeddedlinuxinterfacing.com/wiki.php/ActiontecDualModem
> 

__
actionhack Mailing List - actionhack-W7/[email protected]
http://www.express.org/mailman/listinfo/actionhack
http://www.embeddedlinuxinterfacing.com/wiki.php/ActiontecDualModem

__
actionhack Mailing List - actionhack-W7/[email protected]
http://www.express.org/mailman/listinfo/actionhack
http://www.embeddedlinuxinterfacing.com/wiki.php/ActiontecDualModem