Re: Help building/indtalling on RH8

James,

Thank you for your suggestion, but before I can test the tv device, I
have to have successfully built and installed the SDK... this is where I
am having problems.  I am getting errors duirng the "make install"
process as shown below:

=====

[root@linusrh8 upnp]# make install
make[1]: Entering directory `/root/libupnp-1.2.1/ixml'
make[2]: Entering directory `/root/libupnp-1.2.1/ixml/src'
make[2]: `obj/libixml.so' is up to date.
make[2]: Leaving directory `/root/libupnp-1.2.1/ixml/src'
make[1]: Leaving directory `/root/libupnp-1.2.1/ixml'
make[1]: Entering directory `/root/libupnp-1.2.1/threadutil'
make[2]: Entering directory `/root/libupnp-1.2.1/threadutil/src'
make[2]: Leaving directory `/root/libupnp-1.2.1/threadutil/src'
make[1]: `all' is up to date.
make[1]: Leaving directory `/root/libupnp-1.2.1/threadutil'
make[1]: Entering directory `/root/libupnp-1.2.1/upnp/src'
make[2]: Entering directory `/root/libupnp-1.2.1/upnp/src/ssdp'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/root/libupnp-1.2.1/upnp/src/ssdp'
make[2]: Entering directory `/root/libupnp-1.2.1/upnp/src/soap'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/root/libupnp-1.2.1/upnp/src/soap'
make[2]: Entering directory `/root/libupnp-1.2.1/upnp/src/genlib'
make[3]: Entering directory
`/root/libupnp-1.2.1/upnp/src/genlib/miniserver'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory
`/root/libupnp-1.2.1/upnp/src/genlib/miniserver'
make[3]: Entering directory
`/root/libupnp-1.2.1/upnp/src/genlib/service_table'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory
`/root/libupnp-1.2.1/upnp/src/genlib/service_table'
make[3]: Entering directory `/root/libupnp-1.2.1/upnp/src/genlib/util'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/root/libupnp-1.2.1/upnp/src/genlib/util'
make[3]: Entering directory
`/root/libupnp-1.2.1/upnp/src/genlib/client_table'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory
`/root/libupnp-1.2.1/upnp/src/genlib/client_table'
make[3]: Entering directory `/root/libupnp-1.2.1/upnp/src/genlib/net'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/root/libupnp-1.2.1/upnp/src/genlib/net'
make[3]: Entering directory
`/root/libupnp-1.2.1/upnp/src/genlib/net/http'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory
`/root/libupnp-1.2.1/upnp/src/genlib/net/http'
make[3]: Entering directory
`/root/libupnp-1.2.1/upnp/src/genlib/net/uri'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/root/libupnp-1.2.1/upnp/src/genlib/net/uri'
make[2]: Leaving directory `/root/libupnp-1.2.1/upnp/src/genlib'
make[2]: Entering directory `/root/libupnp-1.2.1/upnp/src/gena'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/root/libupnp-1.2.1/upnp/src/gena'
make[2]: Entering directory `/root/libupnp-1.2.1/upnp/src/urlconfig'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/root/libupnp-1.2.1/upnp/src/urlconfig'
make[2]: Entering directory `/root/libupnp-1.2.1/upnp/src/api'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/root/libupnp-1.2.1/upnp/src/api'
make[2]: Entering directory `/root/libupnp-1.2.1/upnp/src/uuid'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/root/libupnp-1.2.1/upnp/src/uuid'
gcc -Wall  -shared -Wl,-soname,libupnp.so lib/api.o lib//ssdp.o
lib//soap.o lib//uuid.o lib//miniserverall.o lib//service_table.o
lib//uriall.o lib//client_table.o lib//utilall.o lib//netall.o
lib//httpall.o lib//urlconfigall.o lib//gena.o -o ../bin/libupnp.so 
../bin/libthreadutil.so ../bin/libixml.so
make[1]: Leaving directory `/root/libupnp-1.2.1/upnp/src'
ln: `/usr/lib/libupnp.so': File exists
make: *** [install] Error 1
[root@linusrh8 upnp]#

====


Do you have any suggestions as to what may be going wrong?

Thanks, in advance.

John


On Thu, 2003-11-13 at 01:53, James Yegerlehner wrote:
> I'd try running the example tv device and control points, and see if they
> can talk to each other.  You can also run the tv device, and see if the
> Windows see's it and loads the presentation page.
> 
> Regards,
> ------------
> James Yegerlehner
> Omniopera: XML Schema and WSDL Authoring Software
> http://www.omniopera.com
> 
> ----- Original Message ----- 
> From: "John Rumball" <[email protected]>
> To: <[email protected]>
> Sent: Wednesday, November 12, 2003 6:46 PM
> Subject: [UPnP-SDK-discuss] Help building/indtalling on RH8
> 
> 
> > Hello,
> >
> > I am new to this list and trying to find help with building and
> > installing the UPNP SDk on RedHat8.
> >
> > I have tried myself, following the instructions in the release notes but
> > I think its a bit over my head.
> >
> > How can I confirm if I have installed it properly?  If you have any tips
> > or suggestions I'd be happy to hear them.
> >
> > Thanks in advance.
> >
> >
> > John Rumball, CCNA
> >
> >
> >
> >
> > -------------------------------------------------------
> > This SF.Net email sponsored by: ApacheCon 2003,
> > 16-19 November in Las Vegas. Learn firsthand the latest
> > developments in Apache, PHP, Perl, XML, Java, MySQL,
> > WebDAV, and more! http://www.apachecon.com/
> > _______________________________________________
> > UPnP-SDK-discuss mailing list
> > [email protected]
> > https://lists.sourceforge.net/lists/listinfo/upnp-sdk-discuss
> >
> 
> 
> 



-------------------------------------------------------
This SF. Net email is sponsored by: GoToMyPC
GoToMyPC is the fast, easy and secure way to access your computer from
any Web browser or wireless device. Click here to Try it Free!
https://www.gotomypc.com/tr/OSDN/AW/Q4_2003/t/g22lp?Target=mm/g22lp.tmpl