*

<6>md: Autodetecting RAID arrays. 
<6>md: autorun ... 
<6>md: ... autorun DONE. 
<5>RAMDISK: Compressed image found at block 0 
<4>VFS: Mounted root (ext2 filesystem). 
<5>ReiserFS: hda6: found reiserfs format "3.6" with standard journal 
<5>ReiserFS: hda6: using ordered data mode 
<4>reiserfs: using flush barriers 
<5>ReiserFS: hda6: journal params: device hda6, size 8192, journal first block 18, max 
trans len 1024, max batch 900, max commit age 30, max trans age 30 
<5>ReiserFS: hda6: checking transaction log (hda6) 
<5>ReiserFS: hda6: replayed 53 transactions in 6 seconds 
<5>ReiserFS: hda6: Using r5 hash to sort names 
<4>VFS: Mounted root (reiserfs filesystem) readonly. 
<5>Trying to move old root to /initrd ... failed 
<5>Unmounting old root 
<5>Trying to free ramdisk memory ... okay 
<6>Freeing unused kernel memory: 212k freed 
<6>Adding 1020088k swap on /dev/hda5.  Priority:42 extents:1 
<4>reiserfs: enabling write barrier flush mode 
<5>ReiserFS: hda6: Removing [72918 589770 0x0 SD]..done 
<5>ReiserFS: hda6: Removing [72918 547461 0x0 SD]..done 
<5>ReiserFS: hda6: There were 2 uncompleted unlinks/truncates. Completed 
<6>usbcore: registered new driver usbfs 
<6>usbcore: registered new driver hub 
<7>evdev_connect: evdev cdec47c0 handle cdec47dc name event0 
<7>evdev_connect: evdev cdec45c0 handle cdec45dc name event1 
<7>evdev_connect: evdev cdec44c0 handle cdec44dc name event2 
<7>evdev_connect: evdev cdec43c0 handle cdec43dc name event3 
<6>md: Autodetecting RAID arrays. 
<6>md: autorun ... 
<6>md: ... autorun DONE. 
<6>device-mapper: 4.1.0-ioctl (2003-12-10) initialised: [email protected] 
<3>hw_random: RNG not detected 
<6>USB Universal Host Controller Interface driver v2.2 
<6>ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 11 (level, low) -> IRQ 11 
<6>uhci_hcd 0000:00:1d.0: UHCI Host Controller 
<7>PCI: Setting latency timer of device 0000:00:1d.0 to 64 
<6>uhci_hcd 0000:00:1d.0: irq 11, io base 00001800 
<6>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 
<6>usb usb1: Product: UHCI Host Controller 
<6>usb usb1: Manufacturer: Linux 2.6.8-24.18-default uhci_hcd 
<6>usb usb1: SerialNumber: 0000:00:1d.0 
<6>hub 1-0:1.0: USB hub found 
<6>hub 1-0:1.0: 2 ports detected 
<6>ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 11 (level, low) -> IRQ 11 
<6>uhci_hcd 0000:00:1d.1: UHCI Host Controller 
<7>PCI: Setting latency timer of device 0000:00:1d.1 to 64 
<6>uhci_hcd 0000:00:1d.1: irq 11, io base 00001820 
<6>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 
<6>usb usb2: Product: UHCI Host Controller 
<6>usb usb2: Manufacturer: Linux 2.6.8-24.18-default uhci_hcd 
<6>usb usb2: SerialNumber: 0000:00:1d.1 
<6>hub 2-0:1.0: USB hub found 
<6>hub 2-0:1.0: 2 ports detected 
<6>ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 11 (level, low) -> IRQ 11 
<6>uhci_hcd 0000:00:1d.2: UHCI Host Controller 
<7>PCI: Setting latency timer of device 0000:00:1d.2 to 64 
<6>uhci_hcd 0000:00:1d.2: irq 11, io base 00001840 
<6>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 
<6>usb usb3: Product: UHCI Host Controller 
<6>usb usb3: Manufacturer: Linux 2.6.8-24.18-default uhci_hcd 
<6>usb usb3: SerialNumber: 0000:00:1d.2 
<6>hub 3-0:1.0: USB hub found 
<6>hub 3-0:1.0: 2 ports detected 
<6>usb 2-1: new low speed USB device using address 2 
<6>usb 2-1: Product: Microsoft USB Wireless Mouse 
<6>usb 2-1: Manufacturer: Microsoft 
<6>Linux agpgart interface v0.100 (c) Dave Jones 
<6>usb 2-2: new full speed USB device using address 3 
<6>usb 2-2: Product: NEC USB UF000x 
<6>usb 2-2: Manufacturer: NEC 
<6>agpgart: Detected an Intel 855PM Chipset. 
<6>agpgart: Maximum main memory to use for agp memory: 439M 
<6>agpgart: AGP aperture is 256M @ 0xd0000000 
<6>ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 11 (level, low) -> IRQ 11 
<6>ehci_hcd 0000:00:1d.7: EHCI Host Controller 
<7>PCI: Setting latency timer of device 0000:00:1d.7 to 64 
<6>ehci_hcd 0000:00:1d.7: irq 11, pci mem e085c000 
<6>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4 
<7>PCI: cache line size of 32 is not supported by device 0000:00:1d.7 
<6>ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10 
<6>usb usb4: Product: EHCI Host Controller 
<6>usb usb4: Manufacturer: Linux 2.6.8-24.18-default ehci_hcd 
<6>usb usb4: SerialNumber: 0000:00:1d.7 
<6>usb 2-1: USB disconnect, address 2 
<6>usb 2-2: USB disconnect, address 3 
<6>hub 4-0:1.0: USB hub found 
<6>hub 4-0:1.0: 6 ports detected 
<6>usb 2-1: new low speed USB device using address 4 
<6>usb 2-1: Product: Microsoft USB Wireless Mouse 
<6>usb 2-1: Manufacturer: Microsoft 
<6>usb 2-2: new full speed USB device using address 5 
<6>usb 2-2: Product: NEC USB UF000x 
<6>usb 2-2: Manufacturer: NEC 
<6>usbcore: registered new driver hiddev 
<5>SCSI subsystem initialized 
<6>Initializing USB Mass Storage driver... 
<7>evdev_connect: evdev dff501c0 handle dff501dc name event4 
<6>input: USB HID v1.11 Mouse [Microsoft Microsoft USB Wireless Mouse] on 
usb-0000:00:1d.1-1 
<6>usbcore: registered new driver usbhid 
<6>drivers/usb/input/hid-core.c: v2.0:USB HID core driver 
<5>usb-storage: This device (0409,0040,0160 S 04 P 00) has unneeded SubClass and 
Protocol entries in unusual_devs.h 
<4>   Please send a copy of this message to <[email protected]> 

-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier.
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel