[PATCH 21/70] USB serial: add dynamic id support to usb-serial core

Greg KH <[email protected]>
Newsgroups gmane.linux.usb.devel
Message-ID <[email protected]>
From: Greg Kroah-Hartman <[email protected]>

Thanks to Johannes Hölzl <[email protected]> for fixing a few
things and getting it all working properly.

This adds support for dynamic usb ids to the usb serial core.  The file
"new_id" will show up under the usb serial driver, not the usb driver
associated with the usb-serial driver (yeah, it can be a bit confusing
at first glance...)

This patch also modifies the USB core to allow the usb-serial core to
reuse much of the dynamic id logic.

Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Johannes Hölzl <[email protected]>
---
 drivers/usb/core/driver.c       |   35 ++++++++++++++++-------------
 drivers/usb/serial/bus.c        |   45 +++++++++++++++++++++++++++++++++++++++
 drivers/usb/serial/usb-serial.c |   41 +++++++++++++++++++++++++++++++----
 include/linux/usb.h             |   12 ++++++++++
 include/linux/usb/serial.h      |    5 ++++
 5 files changed, 117 insertions(+), 21 deletions(-)

diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index d6eb5ce..0c0c03a 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -28,24 +28,16 @@
 #include "hcd.h"
 #include "usb.h"
 
-static int usb_match_one_id(struct usb_interface *interface,
-			    const struct usb_device_id *id);
-
-struct usb_dynid {
-	struct list_head node;
-	struct usb_device_id id;
-};
-
 #ifdef CONFIG_HOTPLUG
 
 /*
  * Adds a new dynamic USBdevice ID to this driver,
  * and cause the driver to probe for all devices again.
  */
-static ssize_t store_new_id(struct device_driver *driver,
-			    const char *buf, size_t count)
+ssize_t usb_store_new_id(struct usb_dynids *dynids,
+			 struct device_driver *driver,
+			 const char *buf, size_t count)
 {
-	struct usb_driver *usb_drv = to_usb_driver(driver);
 	struct usb_dynid *dynid;
 	u32 idVendor = 0;
 	u32 idProduct = 0;
@@ -65,9 +57,9 @@ static ssize_t store_new_id(struct device_driver *driver,
 	dynid->id.idProduct = idProduct;
 	dynid->id.match_flags = USB_DEVICE_ID_MATCH_DEVICE;
 
-	spin_lock(&usb_drv->dynids.lock);
-	list_add_tail(&usb_drv->dynids.list, &dynid->node);
-	spin_unlock(&usb_drv->dynids.lock);
+	spin_lock(&dynids->lock);
+	list_add_tail(&dynids->list, &dynid->node);
+	spin_unlock(&dynids->lock);
 
 	if (get_driver(driver)) {
 		retval = driver_attach(driver);
@@ -78,6 +70,15 @@ static ssize_t store_new_id(struct device_driver *driver,
 		return retval;
 	return count;
 }
+EXPORT_SYMBOL_GPL(usb_store_new_id);
+
+static ssize_t store_new_id(struct device_driver *driver,
+			    const char *buf, size_t count)
+{
+	struct usb_driver *usb_drv = to_usb_driver(driver);
+
+	return usb_store_new_id(&usb_drv->dynids, driver, buf, count);
+}
 static DRIVER_ATTR(new_id, S_IWUSR, NULL, store_new_id);
 
 static int usb_create_newid_file(struct usb_driver *usb_drv)
@@ -365,8 +366,8 @@ void usb_driver_release_interface(struct usb_driver *driver,
 EXPORT_SYMBOL(usb_driver_release_interface);
 
 /* returns 0 if no match, 1 if match */
-static int usb_match_one_id(struct usb_interface *interface,
-			    const struct usb_device_id *id)
+int usb_match_one_id(struct usb_interface *interface,
+		     const struct usb_device_id *id)
 {
 	struct usb_host_interface *intf;
 	struct usb_device *dev;
@@ -432,6 +433,8 @@ static int usb_match_one_id(struct usb_interface *interface,
 
 	return 1;
 }
+EXPORT_SYMBOL_GPL(usb_match_one_id);
+
 /**
  * usb_match_id - find first usb_device_id matching device or interface
  * @interface: the interface of interest
diff --git a/drivers/usb/serial/bus.c b/drivers/usb/serial/bus.c
index 6542f22..c08a384 100644
--- a/drivers/usb/serial/bus.c
+++ b/drivers/usb/serial/bus.c
@@ -103,11 +103,52 @@ exit:
 	return retval;
 }
 
+#ifdef CONFIG_HOTPLUG
+static ssize_t store_new_id(struct device_driver *driver,
+			    const char *buf, size_t count)
+{
+	struct usb_serial_driver *usb_drv = to_usb_serial_driver(driver);
+	ssize_t retval = usb_store_new_id(&usb_drv->dynids, driver, buf, count);
+
+	if (retval >= 0 && usb_drv->usb_driver != NULL)
+		retval = usb_store_new_id(&usb_drv->usb_driver->dynids,
+					  &usb_drv->usb_driver->drvwrap.driver,
+					  buf, count);
+	return retval;
+}
+
+static struct driver_attribute drv_attrs[] = {
+	__ATTR(new_id, S_IWUSR, NULL, store_new_id),
+	__ATTR_NULL,
+};
+
+static void free_dynids(struct usb_serial_driver *drv)
+{
+	struct usb_dynid *dynid, *n;
+
+	spin_lock(&drv->dynids.lock);
+	list_for_each_entry_safe(dynid, n, &drv->dynids.list, node) {
+		list_del(&dynid->node);
+		kfree(dynid);
+	}
+	spin_unlock(&drv->dynids.lock);
+}
+
+#else
+static struct driver_attribute drv_attrs[] = {
+	__ATTR_NULL,
+};
+static inline void free_dynids(struct usb_driver *drv)
+{
+}
+#endif
+
 struct bus_type usb_serial_bus_type = {
 	.name =		"usb-serial",
 	.match =	usb_serial_device_match,
 	.probe =	usb_serial_device_probe,
 	.remove =	usb_serial_device_remove,
+	.drv_attrs = 	drv_attrs,
 };
 
 int usb_serial_bus_register(struct usb_serial_driver *driver)
@@ -115,6 +156,9 @@ int usb_serial_bus_register(struct usb_serial_driver *driver)
 	int retval;
 
 	driver->driver.bus = &usb_serial_bus_type;
+	spin_lock_init(&driver->dynids.lock);
+	INIT_LIST_HEAD(&driver->dynids.list);
+
 	retval = driver_register(&driver->driver);
 
 	return retval;
@@ -122,6 +166,7 @@ int usb_serial_bus_register(struct usb_serial_driver *driver)
 
 void usb_serial_bus_deregister(struct usb_serial_driver *driver)
 {
+	free_dynids(driver);
 	driver_unregister(&driver->driver);
 }
 
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 716f680..90beb5c 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -596,6 +596,39 @@ static struct usb_serial * create_serial (struct usb_device *dev,
 	return serial;
 }
 
+static const struct usb_device_id *match_dynamic_id(struct usb_interface *intf,
+						    struct usb_serial_driver *drv)
+{
+	struct usb_dynid *dynid;
+
+	spin_lock(&drv->dynids.lock);
+	list_for_each_entry(dynid, &drv->dynids.list, node) {
+		if (usb_match_one_id(intf, &dynid->id)) {
+			spin_unlock(&drv->dynids.lock);
+			return &dynid->id;
+		}
+	}
+	spin_unlock(&drv->dynids.lock);
+	return NULL;
+}
+
+static const struct usb_device_id *get_iface_id(struct usb_serial_driver *drv,
+						struct usb_interface *intf)
+{
+	const struct usb_device_id *id;
+
+	id = usb_match_id(intf, drv->id_table);
+	if (id) {
+		dbg("static descriptor matches");
+		goto exit;
+	}
+	id = match_dynamic_id(intf, drv);
+	if (id)
+		dbg("dynamic descriptor matches");
+exit:
+	return id;
+}
+
 static struct usb_serial_driver *search_serial_device(struct usb_interface *iface)
 {
 	struct list_head *p;
@@ -605,11 +638,9 @@ static struct usb_serial_driver *search_serial_device(struct usb_interface *ifac
 	/* Check if the usb id matches a known device */
 	list_for_each(p, &usb_serial_driver_list) {
 		t = list_entry(p, struct usb_serial_driver, driver_list);
-		id = usb_match_id(iface, t->id_table);
-		if (id != NULL) {
-			dbg("descriptor matches");
+		id = get_iface_id(t, iface);
+		if (id)
 			return t;
-		}
 	}
 
 	return NULL;
@@ -661,7 +692,7 @@ int usb_serial_probe(struct usb_interface *interface,
 			return -EIO;
 		}
 
-		id = usb_match_id(interface, type->id_table);
+		id = get_iface_id(type, interface);
 		retval = type->probe(serial, id);
 		module_put(type->driver.owner);
 
diff --git a/include/linux/usb.h b/include/linux/usb.h
index f3b2163..3cb9285 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -476,6 +476,8 @@ extern void usb_driver_release_interface(struct usb_driver *driver,
 			struct usb_interface *iface);
 const struct usb_device_id *usb_match_id(struct usb_interface *interface,
 					 const struct usb_device_id *id);
+extern int usb_match_one_id(struct usb_interface *interface,
+			    const struct usb_device_id *id);
 
 extern struct usb_interface *usb_find_interface(struct usb_driver *drv,
 		int minor);
@@ -724,11 +726,21 @@ static inline int usb_endpoint_is_isoc_out(const struct usb_endpoint_descriptor
 
 /* ----------------------------------------------------------------------- */
 
+/* Stuff for dynamic usb ids */
 struct usb_dynids {
 	spinlock_t lock;
 	struct list_head list;
 };
 
+struct usb_dynid {
+	struct list_head node;
+	struct usb_device_id id;
+};
+
+extern ssize_t usb_store_new_id(struct usb_dynids *dynids,
+				struct device_driver *driver,
+				const char *buf, size_t count);
+
 /**
  * struct usbdrv_wrap - wrapper for driver-model structure
  * @driver: The driver-model core driver structure.
diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
index 10f99e5..33dcd85 100644
--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -179,6 +179,9 @@ static inline void usb_set_serial_data (struct usb_serial *serial, void *data)
  *	memory structure allocation at this point in time.
  * @shutdown: pointer to the driver's shutdown function.  This will be
  *	called when the device is removed from the system.
+ * @usb_driver: pointer to the struct usb_driver that controls this
+ *	device.  This is necessary to allow dynamic ids to be added to
+ *	the driver from sysfs.
  *
  * This structure is defines a USB Serial driver.  It provides all of
  * the information that the USB serial core code needs.  If the function
@@ -202,6 +205,8 @@ struct usb_serial_driver {
 
 	struct list_head	driver_list;
 	struct device_driver	driver;
+	struct usb_driver	*usb_driver;
+	struct usb_dynids	dynids;
 
 	int (*probe) (struct usb_serial *serial, const struct usb_device_id *id);
 	int (*attach) (struct usb_serial *serial);
-- 
1.4.4.4


-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier.
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.