[PATCH 22/70] USB serial: add driver pointer to all usb-serial drivers
Greg KH <[email protected]>
| Newsgroups | gmane.linux.usb.devel |
|---|---|
| Message-ID | <[email protected]> |
From: =?utf-8?q?Johannes_H=C3=B6lzl?= <[email protected]> Every usb serial driver should have a pointer to the corresponding usb driver. So the usb serial core can add a new id not only to the usb serial driver, but also to the usb driver. Also the usb drivers of ark3116, mos7720 and mos7840 missed the flag no_dynamic_id=1. This is added now. Signed-off-by: Johannes Hölzl <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> --- drivers/usb/serial/aircable.c | 16 ++++++++------ drivers/usb/serial/airprime.c | 1 + drivers/usb/serial/ark3116.c | 2 + drivers/usb/serial/belkin_sa.c | 1 + drivers/usb/serial/cp2101.c | 1 + drivers/usb/serial/cyberjack.c | 3 +- drivers/usb/serial/cypress_m8.c | 3 ++ drivers/usb/serial/digi_acceleport.c | 2 + drivers/usb/serial/empeg.c | 1 + drivers/usb/serial/ftdi_sio.c | 1 + drivers/usb/serial/funsoft.c | 1 + drivers/usb/serial/garmin_gps.c | 1 + drivers/usb/serial/generic.c | 35 ++++++++++++++++++-------------- drivers/usb/serial/hp4x.c | 1 + drivers/usb/serial/io_edgeport.c | 8 ------- drivers/usb/serial/io_tables.h | 11 ++++++++++ drivers/usb/serial/io_ti.c | 2 + drivers/usb/serial/ipaq.c | 1 + drivers/usb/serial/ipw.c | 1 + drivers/usb/serial/ir-usb.c | 1 + drivers/usb/serial/keyspan.h | 4 +++ drivers/usb/serial/keyspan_pda.c | 3 ++ drivers/usb/serial/kl5kusb105.c | 1 + drivers/usb/serial/kobil_sct.c | 1 + drivers/usb/serial/mct_u232.c | 1 + drivers/usb/serial/mos7720.c | 16 ++++++++------ drivers/usb/serial/mos7840.c | 16 ++++++++------ drivers/usb/serial/navman.c | 1 + drivers/usb/serial/omninet.c | 1 + drivers/usb/serial/option.c | 1 + drivers/usb/serial/pl2303.c | 1 + drivers/usb/serial/safe_serial.c | 1 + drivers/usb/serial/sierra.c | 2 + drivers/usb/serial/ti_usb_3410_5052.c | 2 + drivers/usb/serial/visor.c | 3 ++ drivers/usb/serial/whiteheat.c | 2 + 36 files changed, 104 insertions(+), 45 deletions(-) diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c index 86bcf63..46c856a 100644 --- a/drivers/usb/serial/aircable.c +++ b/drivers/usb/serial/aircable.c @@ -572,8 +572,17 @@ static void aircable_unthrottle(struct usb_serial_port *port) schedule_work(&priv->rx_work); } +static struct usb_driver aircable_driver = { + .name = "aircable", + .probe = usb_serial_probe, + .disconnect = usb_serial_disconnect, + .id_table = id_table, + .no_dynamic_id = 1, +}; + static struct usb_serial_driver aircable_device = { .description = "aircable", + .usb_driver = &aircable_driver, .id_table = id_table, .num_ports = 1, .attach = aircable_attach, @@ -587,13 +596,6 @@ static struct usb_serial_driver aircable_device = { .unthrottle = aircable_unthrottle, }; -static struct usb_driver aircable_driver = { - .name = "aircable", - .probe = usb_serial_probe, - .disconnect = usb_serial_disconnect, - .id_table = id_table, -}; - static int __init aircable_init (void) { int retval; diff --git a/drivers/usb/serial/airprime.c b/drivers/usb/serial/airprime.c index f2ca76a..0af42e3 100644 --- a/drivers/usb/serial/airprime.c +++ b/drivers/usb/serial/airprime.c @@ -277,6 +277,7 @@ static struct usb_serial_driver airprime_device = { .owner = THIS_MODULE, .name = "airprime", }, + .usb_driver = &airprime_driver, .id_table = id_table, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c index 5261cd2..edd6857 100644 --- a/drivers/usb/serial/ark3116.c +++ b/drivers/usb/serial/ark3116.c @@ -444,6 +444,7 @@ static struct usb_driver ark3116_driver = { .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, + .no_dynamic_id = 1, }; static struct usb_serial_driver ark3116_device = { @@ -452,6 +453,7 @@ static struct usb_serial_driver ark3116_device = { .name = "ark3116", }, .id_table = id_table, + .usb_driver = &ark3116_driver, .num_interrupt_in = 1, .num_bulk_in = 1, .num_bulk_out = 1, diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c index 38b4dae..3b800d2 100644 --- a/drivers/usb/serial/belkin_sa.c +++ b/drivers/usb/serial/belkin_sa.c @@ -126,6 +126,7 @@ static struct usb_serial_driver belkin_device = { .name = "belkin", }, .description = "Belkin / Peracom / GoHubs USB Serial Adapter", + .usb_driver = &belkin_driver, .id_table = id_table_combined, .num_interrupt_in = 1, .num_bulk_in = 1, diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c index 7ebaffd..06b4fff 100644 --- a/drivers/usb/serial/cp2101.c +++ b/drivers/usb/serial/cp2101.c @@ -89,6 +89,7 @@ static struct usb_serial_driver cp2101_device = { .owner = THIS_MODULE, .name = "cp2101", }, + .usb_driver = &cp2101_driver, .id_table = id_table, .num_interrupt_in = 0, .num_bulk_in = 0, diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c index a63c328..4167753 100644 --- a/drivers/usb/serial/cyberjack.c +++ b/drivers/usb/serial/cyberjack.c @@ -88,6 +88,7 @@ static struct usb_serial_driver cyberjack_device = { .name = "cyberjack", }, .description = "Reiner SCT Cyberjack USB card reader", + .usb_driver = &cyberjack_driver, .id_table = id_table, .num_interrupt_in = 1, .num_bulk_in = 1, @@ -98,7 +99,7 @@ static struct usb_serial_driver cyberjack_device = { .open = cyberjack_open, .close = cyberjack_close, .write = cyberjack_write, - .write_room = cyberjack_write_room, + .write_room = cyberjack_write_room, .read_int_callback = cyberjack_read_int_callback, .read_bulk_callback = cyberjack_read_bulk_callback, .write_bulk_callback = cyberjack_write_bulk_callback, diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index 6bc1f40..57b8e27 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -193,6 +193,7 @@ static struct usb_serial_driver cypress_earthmate_device = { .name = "earthmate", }, .description = "DeLorme Earthmate USB", + .usb_driver = &cypress_driver, .id_table = id_table_earthmate, .num_interrupt_in = 1, .num_interrupt_out = 1, @@ -222,6 +223,7 @@ static struct usb_serial_driver cypress_hidcom_device = { .name = "cyphidcom", }, .description = "HID->COM RS232 Adapter", + .usb_driver = &cypress_driver, .id_table = id_table_cyphidcomrs232, .num_interrupt_in = 1, .num_interrupt_out = 1, @@ -251,6 +253,7 @@ static struct usb_serial_driver cypress_ca42v2_device = { .name = "nokiaca42v2", }, .description = "Nokia CA-42 V2 Adapter", + .usb_driver = &cypress_driver, .id_table = id_table_nokiaca42v2, .num_interrupt_in = 1, .num_interrupt_out = 1, diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c index efd9ce3..0b0fb51 100644 --- a/drivers/usb/serial/digi_acceleport.c +++ b/drivers/usb/serial/digi_acceleport.c @@ -509,6 +509,7 @@ static struct usb_serial_driver digi_acceleport_2_device = { .name = "digi_2", }, .description = "Digi 2 port USB adapter", + .usb_driver = &digi_driver, .id_table = id_table_2, .num_interrupt_in = 0, .num_bulk_in = 4, @@ -538,6 +539,7 @@ static struct usb_serial_driver digi_acceleport_4_device = { .name = "digi_4", }, .description = "Digi 4 port USB adapter", + .usb_driver = &digi_driver, .id_table = id_table_4, .num_interrupt_in = 0, .num_bulk_in = 5, diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c index 92beeb1..4703c8f 100644 --- a/drivers/usb/serial/empeg.c +++ b/drivers/usb/serial/empeg.c @@ -117,6 +117,7 @@ static struct usb_serial_driver empeg_device = { .name = "empeg", }, .id_table = id_table, + .usb_driver = &empeg_driver, .num_interrupt_in = 0, .num_bulk_in = 1, .num_bulk_out = 1, diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 6986e75..35cad42 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -615,6 +615,7 @@ static struct usb_serial_driver ftdi_sio_device = { .name = "ftdi_sio", }, .description = "FTDI USB Serial Device", + .usb_driver = &ftdi_driver , .id_table = id_table_combined, .num_interrupt_in = 0, .num_bulk_in = 1, diff --git a/drivers/usb/serial/funsoft.c b/drivers/usb/serial/funsoft.c index 2bebd63..4092f6d 100644 --- a/drivers/usb/serial/funsoft.c +++ b/drivers/usb/serial/funsoft.c @@ -58,6 +58,7 @@ static struct usb_serial_driver funsoft_device = { .name = "funsoft", }, .id_table = id_table, + .usb_driver = &funsoft_driver, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, .num_bulk_out = NUM_DONT_CARE, diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c index 6530d39..74660a3 100644 --- a/drivers/usb/serial/garmin_gps.c +++ b/drivers/usb/serial/garmin_gps.c @@ -1566,6 +1566,7 @@ static struct usb_serial_driver garmin_device = { .name = "garmin_gps", }, .description = "Garmin GPS usb/tty", + .usb_driver = &garmin_driver, .id_table = id_table, .num_interrupt_in = 1, .num_bulk_in = 1, diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index 3604293..601e064 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -20,6 +20,10 @@ #include <linux/usb/serial.h> #include <asm/uaccess.h> +static int generic_probe(struct usb_interface *interface, + const struct usb_device_id *id); + + static int debug; #ifdef CONFIG_USB_SERIAL_GENERIC @@ -34,6 +38,21 @@ MODULE_PARM_DESC(product, "User specified USB idProduct"); static struct usb_device_id generic_device_ids[2]; /* Initially all zeroes. */ +/* we want to look at all devices, as the vendor/product id can change + * depending on the command line argument */ +static struct usb_device_id generic_serial_ids[] = { + {.driver_info = 42}, + {} +}; + +static struct usb_driver generic_driver = { + .name = "usbserial_generic", + .probe = generic_probe, + .disconnect = usb_serial_disconnect, + .id_table = generic_serial_ids, + .no_dynamic_id = 1, +}; + /* All of the device info needed for the Generic Serial Converter */ struct usb_serial_driver usb_serial_generic_device = { .driver = { @@ -41,6 +60,7 @@ struct usb_serial_driver usb_serial_generic_device = { .name = "generic", }, .id_table = generic_device_ids, + .usb_driver = &generic_driver, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, .num_bulk_out = NUM_DONT_CARE, @@ -48,13 +68,6 @@ struct usb_serial_driver usb_serial_generic_device = { .shutdown = usb_serial_generic_shutdown, }; -/* we want to look at all devices, as the vendor/product id can change - * depending on the command line argument */ -static struct usb_device_id generic_serial_ids[] = { - {.driver_info = 42}, - {} -}; - static int generic_probe(struct usb_interface *interface, const struct usb_device_id *id) { @@ -65,14 +78,6 @@ static int generic_probe(struct usb_interface *interface, return usb_serial_probe(interface, id); return -ENODEV; } - -static struct usb_driver generic_driver = { - .name = "usbserial_generic", - .probe = generic_probe, - .disconnect = usb_serial_disconnect, - .id_table = generic_serial_ids, - .no_dynamic_id = 1, -}; #endif int usb_serial_generic_register (int _debug) diff --git a/drivers/usb/serial/hp4x.c b/drivers/usb/serial/hp4x.c index ebcac70..6c6ebae 100644 --- a/drivers/usb/serial/hp4x.c +++ b/drivers/usb/serial/hp4x.c @@ -49,6 +49,7 @@ static struct usb_serial_driver hp49gp_device = { .name = "hp4X", }, .id_table = id_table, + .usb_driver = &hp49gp_driver, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, .num_bulk_out = NUM_DONT_CARE, diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index cca1607..6a26a2e 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -242,14 +242,6 @@ static void edge_shutdown (struct usb_serial *serial); #include "io_tables.h" /* all of the devices that this driver supports */ -static struct usb_driver io_driver = { - .name = "io_edgeport", - .probe = usb_serial_probe, - .disconnect = usb_serial_disconnect, - .id_table = id_table_combined, - .no_dynamic_id = 1, -}; - /* function prototypes for all of our local functions */ static void process_rcvd_data (struct edgeport_serial *edge_serial, unsigned char *buffer, __u16 bufferLength); static void process_rcvd_status (struct edgeport_serial *edge_serial, __u8 byte2, __u8 byte3); diff --git a/drivers/usb/serial/io_tables.h b/drivers/usb/serial/io_tables.h index 3cbb8c1..6d30087 100644 --- a/drivers/usb/serial/io_tables.h +++ b/drivers/usb/serial/io_tables.h @@ -95,12 +95,21 @@ static struct usb_device_id id_table_combined [] = { MODULE_DEVICE_TABLE (usb, id_table_combined); +static struct usb_driver io_driver = { + .name = "io_edgeport", + .probe = usb_serial_probe, + .disconnect = usb_serial_disconnect, + .id_table = id_table_combined, + .no_dynamic_id = 1, +}; + static struct usb_serial_driver edgeport_2port_device = { .driver = { .owner = THIS_MODULE, .name = "edgeport_2", }, .description = "Edgeport 2 port adapter", + .usb_driver = &io_driver, .id_table = edgeport_2port_id_table, .num_interrupt_in = 1, .num_bulk_in = 1, @@ -131,6 +140,7 @@ static struct usb_serial_driver edgeport_4port_device = { .name = "edgeport_4", }, .description = "Edgeport 4 port adapter", + .usb_driver = &io_driver, .id_table = edgeport_4port_id_table, .num_interrupt_in = 1, .num_bulk_in = 1, @@ -161,6 +171,7 @@ static struct usb_serial_driver edgeport_8port_device = { .name = "edgeport_8", }, .description = "Edgeport 8 port adapter", + .usb_driver = &io_driver, .id_table = edgeport_8port_id_table, .num_interrupt_in = 1, .num_bulk_in = 1, diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index 980285c..544098d 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -2979,6 +2979,7 @@ static struct usb_serial_driver edgeport_1port_device = { .name = "edgeport_ti_1", }, .description = "Edgeport TI 1 port adapter", + .usb_driver = &io_driver, .id_table = edgeport_1port_id_table, .num_interrupt_in = 1, .num_bulk_in = 1, @@ -3009,6 +3010,7 @@ static struct usb_serial_driver edgeport_2port_device = { .name = "edgeport_ti_2", }, .description = "Edgeport TI 2 port adapter", + .usb_driver = &io_driver, .id_table = edgeport_2port_id_table, .num_interrupt_in = 1, .num_bulk_in = 2, diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c index 42f757a..a408184 100644 --- a/drivers/usb/serial/ipaq.c +++ b/drivers/usb/serial/ipaq.c @@ -563,6 +563,7 @@ static struct usb_serial_driver ipaq_device = { .name = "ipaq", }, .description = "PocketPC PDA", + .usb_driver = &ipaq_driver, .id_table = ipaq_id_table, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = 1, diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c index d3b9a35..1bc5860 100644 --- a/drivers/usb/serial/ipw.c +++ b/drivers/usb/serial/ipw.c @@ -442,6 +442,7 @@ static struct usb_serial_driver ipw_device = { .name = "ipw", }, .description = "IPWireless converter", + .usb_driver = &usb_ipw_driver, .id_table = usb_ipw_ids, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = 1, diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c index 8fdf486..9d847f6 100644 --- a/drivers/usb/serial/ir-usb.c +++ b/drivers/usb/serial/ir-usb.c @@ -138,6 +138,7 @@ static struct usb_serial_driver ir_device = { .name = "ir-usb", }, .description = "IR Dongle", + .usb_driver = &ir_driver, .id_table = id_table, .num_interrupt_in = 1, .num_bulk_in = 1, diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h index 6413d73..2dc8964 100644 --- a/drivers/usb/serial/keyspan.h +++ b/drivers/usb/serial/keyspan.h @@ -576,6 +576,7 @@ static struct usb_serial_driver keyspan_pre_device = { .name = "keyspan_no_firm", }, .description = "Keyspan - (without firmware)", + .usb_driver = &keyspan_driver, .id_table = keyspan_pre_ids, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, @@ -590,6 +591,7 @@ static struct usb_serial_driver keyspan_1port_device = { .name = "keyspan_1", }, .description = "Keyspan 1 port adapter", + .usb_driver = &keyspan_driver, .id_table = keyspan_1port_ids, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, @@ -617,6 +619,7 @@ static struct usb_serial_driver keyspan_2port_device = { .name = "keyspan_2", }, .description = "Keyspan 2 port adapter", + .usb_driver = &keyspan_driver, .id_table = keyspan_2port_ids, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, @@ -644,6 +647,7 @@ static struct usb_serial_driver keyspan_4port_device = { .name = "keyspan_4", }, .description = "Keyspan 4 port adapter", + .usb_driver = &keyspan_driver, .id_table = keyspan_4port_ids, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = 5, diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c index 126b970..da514cb 100644 --- a/drivers/usb/serial/keyspan_pda.c +++ b/drivers/usb/serial/keyspan_pda.c @@ -793,6 +793,7 @@ static struct usb_serial_driver keyspan_pda_fake_device = { .name = "keyspan_pda_pre", }, .description = "Keyspan PDA - (prerenumeration)", + .usb_driver = &keyspan_pda_driver, .id_table = id_table_fake, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, @@ -809,6 +810,7 @@ static struct usb_serial_driver xircom_pgs_fake_device = { .name = "xircom_no_firm", }, .description = "Xircom / Entregra PGS - (prerenumeration)", + .usb_driver = &keyspan_pda_driver, .id_table = id_table_fake_xircom, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, @@ -824,6 +826,7 @@ static struct usb_serial_driver keyspan_pda_device = { .name = "keyspan_pda", }, .description = "Keyspan PDA", + .usb_driver = &keyspan_pda_driver, .id_table = id_table_std, .num_interrupt_in = 1, .num_bulk_in = 0, diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c index 5c4b06a..b2097c4 100644 --- a/drivers/usb/serial/kl5kusb105.c +++ b/drivers/usb/serial/kl5kusb105.c @@ -124,6 +124,7 @@ static struct usb_serial_driver kl5kusb105d_device = { .name = "kl5kusb105d", }, .description = "KL5KUSB105D / PalmConnect", + .usb_driver = &kl5kusb105d_driver, .id_table = id_table, .num_interrupt_in = 1, .num_bulk_in = 1, diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c index 62bea0c..0683b51 100644 --- a/drivers/usb/serial/kobil_sct.c +++ b/drivers/usb/serial/kobil_sct.c @@ -110,6 +110,7 @@ static struct usb_serial_driver kobil_device = { .name = "kobil", }, .description = "KOBIL USB smart card terminal", + .usb_driver = &kobil_driver, .id_table = id_table, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = 0, diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c index 38b1d17..4cd839b 100644 --- a/drivers/usb/serial/mct_u232.c +++ b/drivers/usb/serial/mct_u232.c @@ -137,6 +137,7 @@ static struct usb_serial_driver mct_u232_device = { .name = "mct_u232", }, .description = "MCT U232", + .usb_driver = &mct_u232_driver, .id_table = id_table_combined, .num_interrupt_in = 2, .num_bulk_in = 0, diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index e55f4ed..6109c67 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -1605,12 +1605,21 @@ static void mos7720_shutdown(struct usb_serial *serial) usb_set_serial_data(serial, NULL); } +static struct usb_driver usb_driver = { + .name = "moschip7720", + .probe = usb_serial_probe, + .disconnect = usb_serial_disconnect, + .id_table = moschip_port_id_table, + .no_dynamic_id = 1, +}; + static struct usb_serial_driver moschip7720_2port_driver = { .driver = { .owner = THIS_MODULE, .name = "moschip7720", }, .description = "Moschip 2 port adapter", + .usb_driver = &usb_driver, .id_table = moschip_port_id_table, .num_interrupt_in = 1, .num_bulk_in = 2, @@ -1631,13 +1640,6 @@ static struct usb_serial_driver moschip7720_2port_driver = { .read_bulk_callback = mos7720_bulk_in_callback, }; -static struct usb_driver usb_driver = { - .name = "moschip7720", - .probe = usb_serial_probe, - .disconnect = usb_serial_disconnect, - .id_table = moschip_port_id_table, -}; - static int __init moschip7720_init(void) { int retval; diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index 83f6614..b2264a8 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -2834,12 +2834,21 @@ static void mos7840_shutdown(struct usb_serial *serial) } +static struct usb_driver io_driver = { + .name = "mos7840", + .probe = usb_serial_probe, + .disconnect = usb_serial_disconnect, + .id_table = moschip_id_table_combined, + .no_dynamic_id = 1, +}; + static struct usb_serial_driver moschip7840_4port_device = { .driver = { .owner = THIS_MODULE, .name = "mos7840", }, .description = DRIVER_DESC, + .usb_driver = &io_driver, .id_table = moschip_port_id_table, .num_interrupt_in = 1, //NUM_DONT_CARE,//1, #ifdef check @@ -2869,13 +2878,6 @@ static struct usb_serial_driver moschip7840_4port_device = { .read_int_callback = mos7840_interrupt_callback, }; -static struct usb_driver io_driver = { - .name = "mos7840", - .probe = usb_serial_probe, - .disconnect = usb_serial_disconnect, - .id_table = moschip_id_table_combined, -}; - /**************************************************************************** * moschip7840_init * This is called by the module subsystem, or on startup to initialize us diff --git a/drivers/usb/serial/navman.c b/drivers/usb/serial/navman.c index 054abee..9070111 100644 --- a/drivers/usb/serial/navman.c +++ b/drivers/usb/serial/navman.c @@ -119,6 +119,7 @@ static struct usb_serial_driver navman_device = { .name = "navman", }, .id_table = id_table, + .usb_driver = &navman_driver, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, .num_bulk_out = NUM_DONT_CARE, diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c index bc91d3b..0216ac1 100644 --- a/drivers/usb/serial/omninet.c +++ b/drivers/usb/serial/omninet.c @@ -93,6 +93,7 @@ static struct usb_serial_driver zyxel_omninet_device = { .name = "omninet", }, .description = "ZyXEL - omni.net lcd plus usb", + .usb_driver = &omninet_driver, .id_table = id_table, .num_interrupt_in = 1, .num_bulk_in = 1, diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 0fed43a..ced9f32 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -135,6 +135,7 @@ static struct usb_serial_driver option_1port_device = { .name = "option1", }, .description = "GSM modem (1-port)", + .usb_driver = &option_driver, .id_table = option_ids1, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 5dc2ac9..6c083d4 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -1118,6 +1118,7 @@ static struct usb_serial_driver pl2303_device = { .name = "pl2303", }, .id_table = id_table, + .usb_driver = &pl2303_driver, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = 1, .num_bulk_out = 1, diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c index 30b7ebc..5a03a3f 100644 --- a/drivers/usb/serial/safe_serial.c +++ b/drivers/usb/serial/safe_serial.c @@ -402,6 +402,7 @@ static struct usb_serial_driver safe_device = { .name = "safe_serial", }, .id_table = id_table, + .usb_driver = &safe_driver, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, .num_bulk_out = NUM_DONT_CARE, diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 6d8e91e..8aca8a7 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -614,6 +614,7 @@ static struct usb_serial_driver sierra_1port_device = { }, .description = "Sierra USB modem (1 port)", .id_table = id_table_1port, + .usb_driver = &sierra_driver, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = 1, .num_bulk_out = 1, @@ -642,6 +643,7 @@ static struct usb_serial_driver sierra_3port_device = { }, .description = "Sierra USB modem (3 port)", .id_table = id_table_3port, + .usb_driver = &sierra_driver, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = 3, .num_bulk_out = 3, diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index 8318900..4203e2b 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -262,6 +262,7 @@ static struct usb_serial_driver ti_1port_device = { .name = "ti_usb_3410_5052_1", }, .description = "TI USB 3410 1 port adapter", + .usb_driver = &ti_usb_driver, .id_table = ti_id_table_3410, .num_interrupt_in = 1, .num_bulk_in = 1, @@ -292,6 +293,7 @@ static struct usb_serial_driver ti_2port_device = { .name = "ti_usb_3410_5052_2", }, .description = "TI USB 5052 2 port adapter", + .usb_driver = &ti_usb_driver, .id_table = ti_id_table_5052, .num_interrupt_in = 1, .num_bulk_in = 2, diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index b09f060..02cd6f7 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -189,6 +189,7 @@ static struct usb_serial_driver handspring_device = { .name = "visor", }, .description = "Handspring Visor / Palm OS", + .usb_driver = &visor_driver, .id_table = id_table, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = 2, @@ -219,6 +220,7 @@ static struct usb_serial_driver clie_5_device = { .name = "clie_5", }, .description = "Sony Clie 5.0", + .usb_driver = &visor_driver, .id_table = clie_id_5_table, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = 2, @@ -249,6 +251,7 @@ static struct usb_serial_driver clie_3_5_device = { .name = "clie_3.5", }, .description = "Sony Clie 3.5", + .usb_driver = &visor_driver, .id_table = clie_id_3_5_table, .num_interrupt_in = 0, .num_bulk_in = 1, diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index 5483d85..bf16e9e 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -161,6 +161,7 @@ static struct usb_serial_driver whiteheat_fake_device = { .name = "whiteheatnofirm", }, .description = "Connect Tech - WhiteHEAT - (prerenumeration)", + .usb_driver = &whiteheat_driver, .id_table = id_table_prerenumeration, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, @@ -176,6 +177,7 @@ static struct usb_serial_driver whiteheat_device = { .name = "whiteheat", }, .description = "Connect Tech - WhiteHEAT", + .usb_driver = &whiteheat_driver, .id_table = id_table_std, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, -- 1.4.4.4 ------------------------------------------------------------------------- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier. Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 _______________________________________________ [email protected] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel