[PATCH 36/70] USB: ps3 ehci bus glue

From: Geoff Levand <[email protected]>

USB EHCI driver bus glue for the PS3 game console.

Signed-off-by: Geoff Levand <[email protected]>
Cc: David Brownell <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
 arch/powerpc/Kconfig        |    2 +
 drivers/usb/host/ehci-hcd.c |   25 ++++++-
 drivers/usb/host/ehci-ps3.c |  193 +++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 219 insertions(+), 1 deletions(-)

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index d6abe49..c393e15 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -529,6 +529,8 @@ config PPC_PS3
 	bool "Sony PS3 (incomplete)"
 	depends on PPC_MULTIPLATFORM && PPC64
 	select PPC_CELL
+	select USB_ARCH_HAS_EHCI
+	select USB_EHCI_BIG_ENDIAN_MMIO
 	help
 	  This option enables support for the Sony PS3 game console
 	  and other platforms using the PS3 hypervisor.
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 03d567e..9ec8962 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -907,7 +907,13 @@ MODULE_LICENSE ("GPL");
 #define	PLATFORM_DRIVER		ehci_hcd_au1xxx_driver
 #endif
 
-#if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER)
+#ifdef CONFIG_PPC_PS3
+#include "ehci-ps3.c"
+#define	PS3_SYSTEM_BUS_DRIVER	ps3_ehci_sb_driver
+#endif
+
+#if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
+    !defined(PS3_SYSTEM_BUS_DRIVER)
 #error "missing bus glue for ehci-hcd"
 #endif
 
@@ -932,6 +938,20 @@ static int __init ehci_hcd_init(void)
 #ifdef PLATFORM_DRIVER
 		platform_driver_unregister(&PLATFORM_DRIVER);
 #endif
+		return retval;
+	}
+#endif
+
+#ifdef PS3_SYSTEM_BUS_DRIVER
+	retval = ps3_system_bus_driver_register(&PS3_SYSTEM_BUS_DRIVER);
+	if (retval < 0) {
+#ifdef PLATFORM_DRIVER
+		platform_driver_unregister(&PLATFORM_DRIVER);
+#endif
+#ifdef PCI_DRIVER
+		pci_unregister_driver(&PCI_DRIVER);
+#endif
+		return retval;
 	}
 #endif
 
@@ -947,6 +967,9 @@ static void __exit ehci_hcd_cleanup(void)
 #ifdef PCI_DRIVER
 	pci_unregister_driver(&PCI_DRIVER);
 #endif
+#ifdef PS3_SYSTEM_BUS_DRIVER
+	ps3_system_bus_driver_unregister(&PS3_SYSTEM_BUS_DRIVER);
+#endif
 }
 module_exit(ehci_hcd_cleanup);
 
diff --git a/drivers/usb/host/ehci-ps3.c b/drivers/usb/host/ehci-ps3.c
new file mode 100644
index 0000000..371f194
--- /dev/null
+++ b/drivers/usb/host/ehci-ps3.c
@@ -0,0 +1,193 @@
+/*
+ *  PS3 EHCI Host Controller driver
+ *
+ *  Copyright (C) 2006 Sony Computer Entertainment Inc.
+ *  Copyright 2006 Sony Corp.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <asm/ps3.h>
+
+static int ps3_ehci_hc_reset(struct usb_hcd *hcd)
+{
+	int result;
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+
+	ehci->big_endian_mmio = 1;
+
+	ehci->caps = hcd->regs;
+	ehci->regs = hcd->regs + HC_LENGTH(ehci_readl(ehci,
+		&ehci->caps->hc_capbase));
+
+	dbg_hcs_params(ehci, "reset");
+	dbg_hcc_params(ehci, "reset");
+
+	ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
+
+	result = ehci_halt(ehci);
+
+	if (result)
+		return result;
+
+	result = ehci_init(hcd);
+
+	if (result)
+		return result;
+
+	ehci_port_power(ehci, 0);
+
+	return result;
+}
+
+static const struct hc_driver ps3_ehci_hc_driver = {
+	.description		= hcd_name,
+	.product_desc		= "PS3 EHCI Host Controller",
+	.hcd_priv_size		= sizeof(struct ehci_hcd),
+	.irq			= ehci_irq,
+	.flags			= HCD_MEMORY | HCD_USB2,
+	.reset			= ps3_ehci_hc_reset,
+	.start			= ehci_run,
+	.stop			= ehci_stop,
+	.shutdown		= ehci_shutdown,
+	.urb_enqueue		= ehci_urb_enqueue,
+	.urb_dequeue		= ehci_urb_dequeue,
+	.endpoint_disable	= ehci_endpoint_disable,
+	.get_frame_number	= ehci_get_frame,
+	.hub_status_data	= ehci_hub_status_data,
+	.hub_control		= ehci_hub_control,
+#if defined(CONFIG_PM)
+	.bus_suspend		= ehci_bus_suspend,
+	.bus_resume		= ehci_bus_resume,
+#endif
+};
+
+#if !defined(DEBUG)
+#undef dev_dbg
+static inline int __attribute__ ((format (printf, 2, 3))) dev_dbg(
+	const struct device *_dev, const char *fmt, ...) {return 0;}
+#endif
+
+
+static int ps3_ehci_sb_probe(struct ps3_system_bus_device *dev)
+{
+	int result;
+	struct usb_hcd *hcd;
+	unsigned int virq;
+	static u64 dummy_mask = DMA_32BIT_MASK;
+
+	if (usb_disabled()) {
+		result = -ENODEV;
+		goto fail_start;
+	}
+
+	result = ps3_mmio_region_create(dev->m_region);
+
+	if (result) {
+		dev_dbg(&dev->core, "%s:%d: ps3_map_mmio_region failed\n",
+			__func__, __LINE__);
+		result = -EPERM;
+		goto fail_mmio;
+	}
+
+	dev_dbg(&dev->core, "%s:%d: mmio mapped_addr %lxh\n", __func__,
+		__LINE__, dev->m_region->lpar_addr);
+
+	result = ps3_alloc_io_irq(dev->interrupt_id, &virq);
+
+	if (result) {
+		dev_dbg(&dev->core, "%s:%d: ps3_construct_io_irq(%d) failed.\n",
+			__func__, __LINE__, virq);
+		result = -EPERM;
+		goto fail_irq;
+	}
+
+	dev->core.power.power_state = PMSG_ON;
+	dev->core.dma_mask = &dummy_mask; /* FIXME: for improper usb code */
+
+	hcd = usb_create_hcd(&ps3_ehci_hc_driver, &dev->core, dev->core.bus_id);
+
+	if (!hcd) {
+		dev_dbg(&dev->core, "%s:%d: usb_create_hcd failed\n", __func__,
+			__LINE__);
+		result = -ENOMEM;
+		goto fail_create_hcd;
+	}
+
+	hcd->rsrc_start = dev->m_region->lpar_addr;
+	hcd->rsrc_len = dev->m_region->len;
+	hcd->regs = ioremap(dev->m_region->lpar_addr, dev->m_region->len);
+
+	if (!hcd->regs) {
+		dev_dbg(&dev->core, "%s:%d: ioremap failed\n", __func__,
+			__LINE__);
+		result = -EPERM;
+		goto fail_ioremap;
+	}
+
+	dev_dbg(&dev->core, "%s:%d: hcd->rsrc_start %lxh\n", __func__, __LINE__,
+		(unsigned long)hcd->rsrc_start);
+	dev_dbg(&dev->core, "%s:%d: hcd->rsrc_len   %lxh\n", __func__, __LINE__,
+		(unsigned long)hcd->rsrc_len);
+	dev_dbg(&dev->core, "%s:%d: hcd->regs       %lxh\n", __func__, __LINE__,
+		(unsigned long)hcd->regs);
+	dev_dbg(&dev->core, "%s:%d: virq            %lu\n", __func__, __LINE__,
+		(unsigned long)virq);
+
+	ps3_system_bus_set_driver_data(dev, hcd);
+
+	result = usb_add_hcd(hcd, virq, IRQF_DISABLED);
+
+	if (result) {
+		dev_dbg(&dev->core, "%s:%d: usb_add_hcd failed (%d)\n",
+			__func__, __LINE__, result);
+		goto fail_add_hcd;
+	}
+
+	return result;
+
+fail_add_hcd:
+	iounmap(hcd->regs);
+fail_ioremap:
+	usb_put_hcd(hcd);
+fail_create_hcd:
+	ps3_free_io_irq(virq);
+fail_irq:
+	ps3_free_mmio_region(dev->m_region);
+fail_mmio:
+fail_start:
+	return result;
+}
+
+static int ps3_ehci_sb_remove(struct ps3_system_bus_device *dev)
+{
+	struct usb_hcd *hcd =
+		(struct usb_hcd *)ps3_system_bus_get_driver_data(dev);
+
+	usb_put_hcd(hcd);
+	ps3_system_bus_set_driver_data(dev, NULL);
+
+	return 0;
+}
+
+MODULE_ALIAS("ps3-ehci");
+
+static struct ps3_system_bus_driver ps3_ehci_sb_driver = {
+	.match_id = PS3_MATCH_ID_EHCI,
+	.core = {
+		.name = "ps3-ehci-driver",
+	},
+	.probe = ps3_ehci_sb_probe,
+	.remove = ps3_ehci_sb_remove,
+};
-- 
1.4.4.4


-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier.
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel