Re: Problems with USB port and a dongle + recompilation with USB support

OK, I recompiled the kernel. When I compiled ndiswrapper, I obtained a 
warning :
this kernel seems to use 4K stack size option (CONFIG_4KSTACKS); many 
Windows drivers will not work with this option enabled. Disable 
CONFIG_4KSTACKS option, recompile and install kernel.

So, I dit a "cat .config |grep CONFIG_4KSTACKS", but I got nothing. Do 
you know this option ? Is there a link with your advice ?

For the moment, I always the same problem.

This is my dmesg :


usb usb1: wakeup_rh (auto-start)
hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0002
uhci_hcd 0000:00:01.2: port 1 portsc 0880,00
hub 1-0:1.0: over-current change on port 1
hub 1-0:1.0: trying to enable port power on non-switchable hub
hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0002
uhci_hcd 0000:00:01.2: port 1 portsc 01b3,00
hub 1-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s
hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301
usb usb1: suspend_rh (auto-stop)
usb usb1: wakeup_rh (auto-start)
hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0002
uhci_hcd 0000:00:01.2: port 1 portsc 01b3,00
hub 1-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s
uhci_hcd 0000:00:01.2: port 1 portsc 0082,00
hub 1-0:1.0: debounce: port 1: total 125ms stable 100ms status 0x100
usb usb1: suspend_rh (auto-stop)
usb usb1: wakeup_rh (auto-start)
hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0002
uhci_hcd 0000:00:01.2: port 1 portsc 01a3,00
hub 1-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s
hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301
usb usb1: suspend_rh (auto-stop)

And this is my /var/log/sys :

Feb 14 09:41:50 localhost kernel: usbcore: registered new interface 
driver usbfs
Feb 14 09:41:50 localhost kernel: usbcore: registered new interface 
driver hub
Feb 14 09:41:50 localhost kernel: usbcore: registered new device driver usb
Feb 14 09:41:50 localhost kernel: usbmon: debugfs is not available
Feb 14 09:41:50 localhost kernel: drivers/usb/core/inode.c: creating 
file 'devices'
Feb 14 09:41:50 localhost kernel: drivers/usb/core/inode.c: creating 
file '001'
Feb 14 09:41:50 localhost kernel: usb usb1: default language 0x0409
Feb 14 09:41:50 localhost kernel: usb usb1: new device strings: Mfr=3, 
Product=2, SerialNumber=1
Feb 14 09:41:50 localhost kernel: usb usb1: Product: UHCI Host Controller
Feb 14 09:41:50 localhost kernel: usb usb1: Manufacturer: Linux 
2.6.1920070214 uhci_hcd
Feb 14 09:41:50 localhost kernel: usb usb1: SerialNumber: 0000:00:01.2
Feb 14 09:41:50 localhost kernel: usb usb1: uevent
Feb 14 09:41:50 localhost kernel: usb usb1: usb_probe_device
Feb 14 09:41:50 localhost kernel: usb usb1: configuration #1 chosen from 
1 choice
Feb 14 09:41:50 localhost kernel: usb usb1: adding 1-0:1.0 (config #1, 
interface 0)
Feb 14 09:41:50 localhost kernel: usb 1-0:1.0: uevent
Feb 14 09:41:50 localhost kernel: hub 1-0:1.0: usb_probe_interface
Feb 14 09:41:50 localhost kernel: hub 1-0:1.0: usb_probe_interface - got id
Feb 14 09:41:50 localhost kernel: hub 1-0:1.0: no power switching (usb 1.0)
Feb 14 09:41:50 localhost kernel: drivers/usb/core/inode.c: creating 
file '001'
Feb 14 09:41:50 localhost kernel: usbcore: registered new interface 
driver libusual
Feb 14 09:41:50 localhost kernel: usb usb1: suspend_rh (auto-stop)
Feb 14 09:41:50 localhost kernel: usb 1-0:1.0: uevent
Feb 14 09:41:50 localhost kernel: usb usb1: uevent
Feb 14 09:41:50 localhost kernel: usb 1-0:1.0: uevent
Feb 14 09:41:50 localhost kernel: usb usb1: uevent



-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel