Re: [PATCH] New unusual device: Nokia 6288

Andrew Nayenko <[email protected]> Sat, 24 Feb 2007 01:01:14 +0300
Newsgroups	gmane.linux.usb.devel
Message-ID	<[email protected]>
> What happens when you try to use the 6288 without US_FL_MAX_SECTORS_64?

cp hangs when I try to read a big file (about 90KB or larger, 84KB or smaller files are read with no problems) from the phone. For example (excuse me long listing):

==================== begin of trace =================
$ strace cp /media/disk/Мелодии/Fast-flying.aac .Trash/
execve("/bin/cp", ["cp", "/media/disk/\320\234\320\265\320\273\320\276\320\264\320"..., ".Trash/"], [/* 36 vars */]) = 0
brk(0)                                  = 0x888f000
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7fca000
access("/etc/ld.so.preload", R_OK)      = -1 ENOENT (No such file or directory)
open("/etc/ld.so.cache", O_RDONLY)      = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=59946, ...}) = 0
mmap2(NULL, 59946, PROT_READ, MAP_PRIVATE, 3, 0) = 0xb7fbb000
close(3)                                = 0
open("/lib/libacl.so.1", O_RDONLY)      = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0ps\263\000"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=26028, ...}) = 0
mmap2(0xb36000, 27288, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb36000
mmap2(0xb3c000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x5) = 0xb3c000
close(3)                                = 0
open("/lib/libselinux.so.1", O_RDONLY)  = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\20\305"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=93512, ...}) = 0
mmap2(0x729000, 93016, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x729000
mmap2(0x73e000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x15) = 0x73e000
close(3)                                = 0
open("/lib/libc.so.6", O_RDONLY)        = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0pP\234\000"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=1576920, ...}) = 0
mmap2(0x9af000, 1295780, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x9af000
mmap2(0xae6000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x137) = 0xae6000
mmap2(0xae9000, 9636, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xae9000
close(3)                                = 0
open("/lib/libattr.so.1", O_RDONLY)     = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0P\254\213"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=15972, ...}) = 0
mmap2(0x8ba000, 17248, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x8ba000
mmap2(0x8be000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x3) = 0x8be000
close(3)                                = 0
open("/lib/libdl.so.2", O_RDONLY)       = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0000\353"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=16528, ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7fba000
mmap2(0xaee000, 12408, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xaee000
mmap2(0xaf0000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1) = 0xaf0000
close(3)                                = 0
open("/lib/libsepol.so.1", O_RDONLY)    = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\300?n\000"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=245376, ...}) = 0
mmap2(0x6e1000, 285024, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x6e1000
mmap2(0x71c000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x3b) = 0x71c000
mmap2(0x71d000, 39264, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x71d000
close(3)                                = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7fb9000
set_thread_area({entry_number:-1 -> 6, base_addr:0xb7fb96d0, limit:1048575, seg_32bit:1, contents:0, read_exec_only:0, limit_in_pages:1, seg_not_present:0, useable:1}) = 0
mprotect(0xae6000, 8192, PROT_READ)     = 0
mprotect(0xaf0000, 4096, PROT_READ)     = 0
mprotect(0x9ab000, 4096, PROT_READ)     = 0
munmap(0xb7fbb000, 59946)               = 0
access("/etc/selinux/", F_OK)           = 0
brk(0)                                  = 0x888f000
brk(0x88b0000)                          = 0x88b0000
open("/etc/selinux/config", O_RDONLY|O_LARGEFILE) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=511, ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7fc9000
read(3, "# This file controls the state o"..., 4096) = 511
read(3, "", 4096)                       = 0
close(3)                                = 0
munmap(0xb7fc9000, 4096)                = 0
open("/proc/mounts", O_RDONLY|O_LARGEFILE) = 3
fstat64(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7fc9000
read(3, "rootfs / rootfs rw 0 0\n/dev/root"..., 1024) = 748
read(3, "", 1024)                       = 0
close(3)                                = 0
munmap(0xb7fc9000, 4096)                = 0
open("/proc/filesystems", O_RDONLY|O_LARGEFILE) = 3
read(3, "nodev\tsysfs\nnodev\trootfs\nnodev\tb"..., 4095) = 316
close(3)                                = 0
open("/usr/lib/locale/locale-archive", O_RDONLY|O_LARGEFILE) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=55566336, ...}) = 0
mmap2(NULL, 2097152, PROT_READ, MAP_PRIVATE, 3, 0) = 0xb7db9000
close(3)                                = 0
geteuid32()                             = 500
stat64(".Trash/", {st_mode=S_IFDIR|0700, st_size=4096, ...}) = 0
stat64("/media/disk/Мелодии/Fast-flying.aac", {st_mode=S_IFREG|0755, st_size=95216, ...}) = 0
stat64(".Trash/Fast-flying.aac", {st_mode=S_IFREG|0755, st_size=16384, ...}) = 0
open("/media/disk/Мелодии/Fast-flying.aac", O_RDONLY|O_LARGEFILE) = 3
fstat64(3, {st_mode=S_IFREG|0755, st_size=95216, ...}) = 0
open(".Trash/Fast-flying.aac", O_WRONLY|O_TRUNC|O_LARGEFILE) = 4
fstat64(4, {st_mode=S_IFREG|0755, st_size=0, ...}) = 0
fstat64(3, {st_mode=S_IFREG|0755, st_size=95216, ...}) = 0
read(3, "\377\361P@\1\177\374\0\0\0\7\377\361P@\1\177\374\0\0\0"..., 4096) = 4096
write(4, "\377\361P@\1\177\374\0\0\0\7\377\361P@\1\177\374\0\0\0"..., 4096) = 4096
read(3, "\343E~\n\n\345AA~\v\301\5\25Du\330~\3211\22\203\26]\224"..., 4096) = 4096
write(4, "\343E~\n\n\345AA~\v\301\5\25Du\330~\3211\22\203\26]\224"..., 4096) = 4096
read(3, "\264\266~\207\263\3615A\331\323:\223\337\20\237\242\345"..., 4096) = 4096
write(4, "\264\266~\207\263\3615A\331\323:\223\337\20\237\242\345"..., 4096) = 4096
read(3, "\221\354r\0\0S&Z\336\365\375\257:\313 .\2\\`\36\36 r\201"..., 4096) = 4096
write(4, "\221\354r\0\0S&Z\336\365\375\257:\313 .\2\\`\36\36 r\201"..., 4096) = 4096
read(3, 
=================== end of trace ===================

After that cp just hangs and dmesg says the following:

================== begin of dmesg ==================
usb 4-1: new full speed USB device using uhci_hcd and address 3
usb 4-1: configuration #1 chosen from 1 choice
scsi1 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
scsi 1:0:0:0: Direct-Access     Nokia    Nokia 6288       0000 PQ: 0 ANSI: 4
SCSI device sda: 1000449 512-byte hdwr sectors (512 MB)
sda: test WP failed, assume Write Enabled
sda: assuming drive cache: write through
SCSI device sda: 1000449 512-byte hdwr sectors (512 MB)
sda: test WP failed, assume Write Enabled
sda: assuming drive cache: write through
 sda:
sd 1:0:0:0: Attached scsi removable disk sda
sd 1:0:0:0: Attached scsi generic sg0 type 0
usb-storage: device scan complete
sda: Current: sense key: No Sense
    Additional sense: No additional sense information
sda: Current: sense key: No Sense
    Additional sense: No additional sense information
usb 4-1: reset full speed USB device using uhci_hcd and address 3
=================== end of dmesg ======================

Sometimes the last line of dmesg ("usb 4-1: reset full speed") is missing.

With US_FL_MAX_SECTORS_64 everything works fine. Nokia 6288 is internally almost the same as Nokia 6233 (both are built on the Series40 v3 platform), so I think it has the same issue as 6233.

    Best regards,

    Andrew Nayenko AKA Relan



-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel