Fw: [Bugme-new] [Bug 8099] New: middle button on usb mouse not working

How'd we manage to break it between -rc4 and -final? :(

Begin forwarded message:

Date: Tue, 27 Feb 2007 13:10:19 -0800
From: [email protected]
To: [email protected]
Subject: [Bugme-new] [Bug 8099] New: middle button on usb mouse not working


http://bugzilla.kernel.org/show_bug.cgi?id=8099

           Summary: middle button on usb mouse not working
    Kernel Version: 2.6.20
            Status: NEW
          Severity: normal
             Owner: [email protected]
         Submitter: [email protected]


Most recent kernel where this bug did *NOT* occur: 2.6.20-rc4
Distribution: Ubuntu
Hardware Environment: atlon xp1700, usb mouse ID 1267:0210 Logic3 / 
SpectraVideo plc
Software Environment:
Problem Description:

Using the wheel as a button does not work with kernels after 2.6.20-rc4. The 
3rd button has to be emulated pressing bother left and right buttons at the 
same time. Does not matter if the mouse is connected to a hub or one of the 
ports on the motherboard.

Using git bisect I narrowed the problem down to commit 
35068976916fdef82d6e69ef1f8c9a1c47732759

I had been using the master branch with that commit reverted. With the commit 
reverted the mouse works normally again.

lsusb -d 1267:0210 -v

Bus 001 Device 003: ID 1267:0210 Logic3 / SpectraVideo plc 
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0         8
  idVendor           0x1267 Logic3 / SpectraVideo plc
  idProduct          0x0210 
  bcdDevice            0.01
  iManufacturer           0 
  iProduct                2 PS/2+USB Mouse
  iSerial                 0 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           34
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xa0
      (Bus Powered)
      Remote Wakeup
    MaxPower              100mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         3 Human Interface Devices
      bInterfaceSubClass      1 Boot Interface Subclass
      bInterfaceProtocol      2 Mouse
      iInterface              0 
        HID Device Descriptor:
          bLength                 9
          bDescriptorType        33
          bcdHID               1.00
          bCountryCode            0 Not supported
          bNumDescriptors         1
          bDescriptorType        34 Report
          wDescriptorLength      72
         Report Descriptors: 
           ** UNAVAILABLE **
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0008  1x 8 bytes
        bInterval              10
Device Status:     0x0000
  (Bus Powered)

------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel