Re: 2.6.21rc3: usb 2-2: pl2303 converter now attached to ttyUSB44

Adrian Bunk <[email protected]>
Newsgroups gmane.linux.kernel,gmane.linux.usb.devel
Message-ID <[email protected]>
On Wed, Mar 07, 2007 at 10:22:04AM +0100, Arkadiusz Miskiewicz wrote:
> 
> 2.6.21rc3 from today git, thinkpad z60m, pl2303 usb-rs232 adapter and:
> 
> [   84.087080] usb 2-2: new full speed USB device using uhci_hcd and address 3
> [   84.232615] usb 2-2: configuration #1 chosen from 1 choice
> [   84.235540] pl2303 2-2:1.0: pl2303 converter detected
> [   84.235732] usb 2-2: pl2303 converter now attached to ttyUSB44
> 
> With older kernels this was ttyUSB0, now it's ttyUSB44 huh, doesn't seem 
> correct, right?
> 
> [arekm@tarm ~]$ ls -l /dev/tts
> razem 0
> crw-rw---- 1 root ttyS   4, 64 2007-03-07 10:58 0
> crw-rw---- 1 root ttyS   4, 65 2007-03-07 10:58 1
> crw-rw---- 1 root ttyS   4, 66 2007-03-07 10:58 2
> crw-rw---- 1 root ttyS   4, 67 2007-03-07 10:58 3
> crw-rw---- 1 root ttyS 188, 44 2007-03-07 10:17 USB44
> 
> Of course it doesn't work. minicom says that there is no device there.
> 
> cat test also:
> cat: /dev/tts/USB44: No such device

Thanks for your report.

Can you confirm that it's the following issue, and therefore fixed for 
you in the latest -git?

Subject    : usb-serial broken
             (devices shows up as ttyUSB44 or ttyUSB140 instead of ttyUSB0)
Submitter  : Craig Schlenter <[email protected]>
Caused-By  : Oliver Neukum <[email protected]>
             commit 34ef50e5b1f96c2d8c0f3d28b7d407743806256c
Fixed-By   : Oliver Neukum <[email protected]>
Commit     : c744f99eb662b54488304b8b60e5f4323b7587bf
Status     : fixed in -rc3-git6

> Arkadiusz Miśkiewicz

cu
Adrian

-- 

       "Is there not promise of rain?" Ling Tan asked suddenly out
        of the darkness. There had been need of rain for many days.
       "Only a promise," Lao Er said.
                                       Pearl S. Buck - Dragon Seed
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.