Re: cdc-acm driver for HSF USB V.92 Data/Fax Modem

Devices shows: 
--------------
( Note that the ACM driver is not getting binded to the interface. How can I get the ACM driver loaded for the interface? )
--------------
T:  Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 10 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=02(comm.) Sub=00 Prot=ff MxPS=64 #Cfgs=  1
P:  Vendor=0803 ProdID=1300 Rev= 1.00
S:  Manufacturer=Conexant Systems, Inc.
S:  Product=HSF USB V.92 Data/Fax Modem
S:  SerialNumber=00000001
C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=260mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=(none)
E:  Ad=01(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:  If#= 1 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=01 Prot=ff Driver=(none)
E:  Ad=82(I) Atr=03(Int.) MxPS=  64 Ivl=1ms
----------------

Dmesg shows:
--------------------
hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0002
uhci_hcd 0000:00:1d.1: port 1 portsc 0093,00
hub 2-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
usb 2-1: new full speed USB device using uhci_hcd and address 10
usb 2-1: skipped 5 descriptors after endpoint
usb 2-1: default language 0x0409
usb 2-1: new device strings: Mfr=1, Product=2, SerialNumber=6
usb 2-1: Product: HSF USB V.92 Data/Fax Modem
usb 2-1: Manufacturer: Conexant Systems, Inc.
usb 2-1: SerialNumber: 00000001
usb 2-1: uevent
usb 2-1: usb_probe_device
usb 2-1: configuration #1 chosen from 1 choice
usb 2-1: adding 2-1:1.0 (config #1, interface 0)
usb 2-1:1.0: uevent
usbtest 2-1:1.0: usb_probe_interface
usbtest 2-1:1.0: usb_probe_interface - got id
usb 2-1: adding 2-1:1.1 (config #1, interface 1)
usb 2-1:1.1: uevent
usbtest 2-1:1.1: usb_probe_interface
usbtest 2-1:1.1: usb_probe_interface - got id
drivers/usb/core/inode.c: creating file '010'
hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0002
--------------------





> -----Original Message-----
> From: Oliver Neukum [mailto:[email protected]]
> Sent: Thursday, March 22, 2007 6:28 PM
> To: [email protected]
> Cc: Pandita, Vikram
> Subject: Re: [linux-usb-devel] cdc-acm driver for HSF USB V.92 Data/Fax
> Modem
> 
> Am Donnerstag, 22. März 2007 13:54 schrieb Pandita, Vikram:
> >
> >  Hi All
> >
> >  Does anyone have the patch for the cdc-acm driver to get the following
> modem working?
> 
> What is the problem? Dmesg and "lsusb -v" please.
> 
> 	Regards
> 		Oliver

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel