[PATCH 11/11] USB: add RESET_RESUME device quirk

This patch (as888) adds a new USB device quirk for devices which are
unable to resume correctly.  By using the new code added for the
USB-persist facility, it is a simple matter to reset these devices
instead of resuming them.  To get things kicked off, a quirk entry is
added for the Philips PSC805.

Signed-off-by: Alan Stern <[email protected]>

---

Index: usb-2.6/drivers/usb/core/driver.c
===================================================================
--- usb-2.6.orig/drivers/usb/core/driver.c
+++ usb-2.6/drivers/usb/core/driver.c
@@ -24,6 +24,7 @@
 
 #include <linux/device.h>
 #include <linux/usb.h>
+#include <linux/usb/quirks.h>
 #include <linux/workqueue.h>
 #include "hcd.h"
 #include "usb.h"
@@ -835,6 +836,9 @@ static int usb_resume_device(struct usb_
 		goto done;
 	}
 
+	if (udev->quirks & USB_QUIRK_RESET_RESUME)
+		udev->reset_resume = 1;
+
 	udriver = to_usb_device_driver(udev->dev.driver);
 	status = udriver->resume(udev);
 
Index: usb-2.6/drivers/usb/core/quirks.c
===================================================================
--- usb-2.6.orig/drivers/usb/core/quirks.c
+++ usb-2.6/drivers/usb/core/quirks.c
@@ -35,6 +35,9 @@ static const struct usb_device_id usb_qu
 	/* Elsa MicroLink 56k (V.250) */
 	{ USB_DEVICE(0x05cc, 0x2267), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
 
+	/* Philips PSC805 audio device */
+	{ USB_DEVICE(0x0471, 0x0155), .driver_info = USB_QUIRK_RESET_RESUME },
+
 	{ }  /* terminating entry must be last */
 };
 
Index: usb-2.6/include/linux/usb/quirks.h
===================================================================
--- usb-2.6.orig/include/linux/usb/quirks.h
+++ usb-2.6/include/linux/usb/quirks.h
@@ -9,3 +9,6 @@
 
 /* string descriptors must not be fetched using a 255-byte read */
 #define USB_QUIRK_STRING_FETCH_255	0x00000002
+
+/* device can't resume correctly so reset it instead */
+#define USB_QUIRK_RESET_RESUME		0x00000004
Index: usb-2.6/drivers/usb/core/hub.c
===================================================================
--- usb-2.6.orig/drivers/usb/core/hub.c
+++ usb-2.6/drivers/usb/core/hub.c
@@ -2989,6 +2989,11 @@ static int config_descriptors_changed(st
  * this from a driver probe() routine after downloading new firmware.
  * For calls that might not occur during probe(), drivers should lock
  * the device using usb_lock_device_for_reset().
+ *
+ * Locking exception: This routine may also be called from within an
+ * autoresume handler.  Such usage won't conflict with other tasks
+ * holding the device lock because these tasks should always call
+ * usb_autopm_resume_device(), thereby preventing any unwanted autoresume.
  */
 int usb_reset_device(struct usb_device *udev)
 {


-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel