Re: [Bugme-new] [Bug 8318] New: Cannot use High-speed USB device - ehci_hcd says: "...config 9 has an invalid descriptor of length 0..."

Andrew Morton <[email protected]>
Newsgroups gmane.linux.usb.devel
Message-ID <[email protected]>
On Tue, 10 Apr 2007 12:12:36 -0700
[email protected] wrote:

> http://bugzilla.kernel.org/show_bug.cgi?id=8318
> 
>            Summary: Cannot use High-speed USB device - ehci_hcd says:
>                     "...config 9 has an invalid descriptor of length 0..."
>     Kernel Version: 2.6.20.6
>             Status: NEW
>           Severity: normal
>              Owner: [email protected]
>          Submitter: [email protected]
> 
> 
> Most recent kernel where this bug did *NOT* occur:
> Don't know. But it do also occur for debian kernel 2.6.18-4.
> 
> Distribution:
> Debian Etch
> 
> Hardware Environment:
> Intel Pentium 4
> ASRock 775VM8 motherboard
> 
> lspci:
> 00:00.0 Host bridge: VIA Technologies, Inc. CN400/PM880 Host Bridge
> 00:00.1 Host bridge: VIA Technologies, Inc. CN400/PM880 Host Bridge
> 00:00.2 Host bridge: VIA Technologies, Inc. CN400/PM880 Host Bridge
> 00:00.3 Host bridge: VIA Technologies, Inc. CN400/PM880 Host Bridge
> 00:00.4 Host bridge: VIA Technologies, Inc. CN400/PM880 Host Bridge
> 00:00.7 Host bridge: VIA Technologies, Inc. CN400/PM880 Host Bridge
> 00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
> 00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID
> Controller (rev 80)
> 00:0f.1 IDE interface: VIA Technologies, Inc.
> VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
> 00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
> (rev 81)
> 00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
> (rev 81)
> 00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
> (rev 81)
> 00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
> (rev 81)
> 00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
> 00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge
> [KT600/K8T800/K8T890 South]
> 00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237
> AC97 Audio Controller (rev 60)
> 00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 78)
> 01:00.0 VGA compatible controller: VIA Technologies, Inc. S3 Unichrome Pro VGA
> Adapter (rev 02)
> 
> 
> Problem Description:
> My external USB hard drive do not work as a high speed device. When I insert it,
> I get dmesg-error like "...config 9 has an invalid descriptor of length 0...".
> 
> If I remove ehci_hcd (rmmod ehci_hcd) it starts working, but only at full speed
> (14 megabit/s).
> 
> To clarify the problem I did:
> 
> * lsusb -v >"lsusb_v before insertion of USB Device.txt"
> * lspci -v >"lspci_v before insertion of USB Device.txt"
> * Attach device
> * dmesg >"dmesg after insertion of USB Device.txt"
> * lsmod >"lsmod after insertion of USB Device.txt"
> * rmmod ehci_hcd
> * dmesg >"dmesg after rmmod_echi_hcd.txt"
> * modprobe ehci_hcd
> ** returns lots (> 30) blank lines
> * dmesg >"dmesg after modprobe_echi_hcd.txt"
> 
> The created files are attached. Also my kernel's .config file is attached.
> 
> I have also tested the external hard drive on a machine running MS windows. It
> worked fine, with transfer rates above 15 megabyte/s. However, it was not the
> same as the box running Linux, as this box is currently Linux-only.
> 
> 
> Steps to reproduce:
> * Make ehci_hcd is loaded
> * Insert USB device into (my) computer
> 
> ------- You are receiving this mail because: -------
> You are on the CC list for the bug, or are watching someone who is.

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.