Re: [1/3] 2.6.21-rc7: known regressions (v2)

Wolfgang Erig <[email protected]>
Newsgroups gmane.linux.kernel,gmane.linux.usb.devel,gmane.linux.alsa.devel
Message-ID <[email protected]>
On Mon, Apr 23, 2007 at 03:18:19PM -0700, Greg KH wrote:
> On Mon, Apr 23, 2007 at 11:48:47PM +0200, Adrian Bunk wrote:
> > This email lists some known regressions in Linus' tree compared to 2.6.20.
> > 
> > If you find your name in the Cc header, you are either submitter of one
> > of the bugs, maintainer of an affectected subsystem or driver, a patch
> > of you caused a breakage or I'm considering you in any other way
> > possibly involved with one or more of these issues.
> > 
> > Due to the huge amount of recipients, please trim the Cc when answering.
> > 
> > 
> > Subject    : gammu no longer works
> > References : http://lkml.org/lkml/2007/4/20/84
> > Submitter  : Wolfgang Erig <[email protected]>
> > Status     : unknown
> 
> I've asked for more information about this, and so far am not sure it's
> a real problem.

It is a real problem for me.
I tried this on 2 different boxes with the same behaviour.
No sync between my Nokia mobile and Linux with the latest kernel :(

Which additional information is useful for this problem?

Wolfgang


$ gammu textall --backup backup
Press Ctrl+C to break...
[Gammu            - 1.10.0 built 10:15:07 Mar 13 2007 in gcc 4.1]
[Connection       - "fbuspl2303"]
[Model type       - "3100"]
[Device           - "/dev/ttyUSB0"]
[Run on           - Linux, kernel 2.6.21-rc7-g80d74d51 (#9 SMP Wed Apr 18 21:41:41 CEST 2007)]
[Module           - "1100|1100a|1100b|2650|3100|3100b|3105|3108|3200|3200a|3205|3220|3300|3510|3510i|3530|3589i|3590|3595|5100|5140|5140i|6020|6021|6030|6100|6101|6103|6111|6125|6131|6170|6200|6220|6230|6230i|6233|6234|6270|6280|6310|6310i|6385|6510|6610|6610i|6800|6810|6820|6822|7200|7210|7250|7250i|7260|7270|7360|7370|7600|8310|8390|8910|8910i"]
Setting speed to 19200
I/O possible
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.