New device PID for ftdi_sio driver

Hello,

I need to use MaxStream's PKG-U modules which includes a ftdi sio chipset for
usb2serial communication, here are the patches for handling Maxstream's modules.

The VID & PID to use with the open-source driver are provided on the CD-ROM
bundled with the modules.

Here is the content on this file :
-------------------
The Linux FTDI USB driver provided is version 1.2.1.  More information on the
driver, including updated versions can be found at
http://ftdi-usb-sio.sourceforge.net/.  The driver should be compiled either as a
loadable module or into a kernel.  The PID should be changed in the header file
to "0xEE18" which corresponds to the PID used on FTDI USB Converter in the
MaxStream PKG-U.
------------------

The patches are for the files taken from the 2.6.20 linux sources.

Neil Armstrong

-- 
Neil "Superna" ARMSTRONG
Etudiant Ecole Polytechnique Universitaire de Nice-Sophia Antipolis
Département Sciences Informatiques
Trésorier BDE Polytech'Nice-Sophia
www.starnux.net / www.na-prod.com
[email protected] (PGP :  0xC3A7903D)
[email protected] (PGP : 0x05834E84)
  [email protected]

-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/

_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel

--- /usr/src/linux-source-2.6.20/drivers/usb/serial/ftdi_sio.c	2007-04-12 19:16:12.000000000 +0200
+++ ftdi_sio.c	2007-04-24 16:03:24.864660410 +0200
@@ -514,6 +514,7 @@
 	{ USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13S_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13U_PID) },
 	{ USB_DEVICE(ELEKTOR_VID, ELEKTOR_FT323R_PID) },
+    { USB_DEVICE(FTDI_VID, FTDI_MAXSTREAM_PID) },
 	{ },					/* Optional parameter entry */
 	{ }					/* Terminating entry */
 };

--- /usr/src/linux-source-2.6.20/drivers/usb/serial/ftdi_sio.h	2007-04-12 19:16:12.000000000 +0200
+++ ftdi_sio.h	2007-04-24 16:03:27.308784487 +0200
@@ -492,6 +492,12 @@
 #define FTDI_TACTRIX_OPENPORT_13S_PID	0xCC49	/* OpenPort 1.3 Subaru */
 #define FTDI_TACTRIX_OPENPORT_13U_PID	0xCC4A	/* OpenPort 1.3 Universal */
 
+/*
+ *  MaxStream devices
+ *  www.maxstream.net
+ */
+#define FTDI_MAXSTREAM_PID 0xEE18 /* Xbee PKG-U Module */
+
 /* Commands */
 #define FTDI_SIO_RESET 		0 /* Reset the port */
 #define FTDI_SIO_MODEM_CTRL 	1 /* Set the modem control register */

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.6 (GNU/Linux)

iD8DBQFGL580DmJGJcOnkD0RAnTnAJwLOfkk2xkZdE9wZW9RZCMYf/YPCQCgr0ML
hZdjRLeqpoD1lcXfV6nO0bM=
=cOvK
-----END PGP SIGNATURE-----