From: Leon Leong <[email protected]>
Add the detection for the BandRich BandLuxe C100/C100S/C120 HSDPA Data
Card. With the vendor and product IDs are set properly, the data card can
be detected and works fine.
Signed-off-by: Leon Leong <[email protected]>
Cc: Greg KH <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
---
drivers/usb/serial/option.c | 6 ++++++
1 file changed, 6 insertions(+)
diff -puN drivers/usb/serial/option.c~usb-bandrich-bandluxe-hsdpa-data-card-driver drivers/usb/serial/option.c
--- a/drivers/usb/serial/option.c~usb-bandrich-bandluxe-hsdpa-data-card-driver
+++ a/drivers/usb/serial/option.c
@@ -113,6 +113,10 @@ static int option_send_setup(struct usb
#define ANYDATA_VENDOR_ID 0x16d5
#define ANYDATA_PRODUCT_ID 0x6501
+#define BANDRICH_VENDOR_ID 0x1A8D
+#define BANDRICH_PRODUCT_C100_1 0x1002
+#define BANDRICH_PRODUCT_C100_2 0x1003
+
static struct usb_device_id option_ids[] = {
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) },
@@ -165,6 +169,8 @@ static struct usb_device_id option_ids[]
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x2130) }, /* Novatel Merlin ES620 SM Bus */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x2410) }, /* Novatel EU740 */
{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ID) },
+ { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_1) },
+ { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_2) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, option_ids);
_
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
lmpx.com only provides a reader for public news (NNTP) servers. It is not
affiliated with the servers or forums shown here and is not responsible for
the content of articles, which is written by their respective authors.