[PATCH 14/78] usbatm: create sysfs link "device" from atm class device to usb interface

From: Simon Arlott <[email protected]>

There is currently no path from the ATM device in /sys to the USB device's
interface that the driver is using; this patch creates a "device" symlink.  It
is then possible to get to the cxacru ADSL statistics
(http://lkml.org/lkml/2007/2/23/328):

/sys/class/atm/cxacru0/device $ ls *_rate *_margin *_attenuation
downstream_attenuation  downstream_snr_margin  upstream_rate
downstream_rate         upstream_attenuation   upstream_snr_margin

If this link is not appropriate I'd have to create device files in
/sys/class/atm/cxacru0 instead - which seems less appropriate since the ADSL
statistics are for the USB device not ATM (which is running over the ADSL).

[[email protected]: cleanups]
Signed-off-by: Simon Arlott <[email protected]>
Cc: Duncan Sands <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
 drivers/usb/atm/usbatm.c |   14 +++++++++++++-
 1 files changed, 13 insertions(+), 1 deletions(-)

diff --git a/drivers/usb/atm/usbatm.c b/drivers/usb/atm/usbatm.c
index d3e2c5f..746d30f 100644
--- a/drivers/usb/atm/usbatm.c
+++ b/drivers/usb/atm/usbatm.c
@@ -968,6 +968,14 @@ static int usbatm_atm_init(struct usbatm_data *instance)
 	/* temp init ATM device, set to 128kbit */
 	atm_dev->link_rate = 128 * 1000 / 424;
 
+	ret = sysfs_create_link(&atm_dev->class_dev.kobj,
+				&instance->usb_intf->dev.kobj, "device");
+	if (ret) {
+		atm_err(instance, "%s: sysfs_create_link failed: %d\n",
+					__func__, ret);
+		goto fail_sysfs;
+	}
+
 	if (instance->driver->atm_start && ((ret = instance->driver->atm_start(instance, atm_dev)) < 0)) {
 		atm_err(instance, "%s: atm_start failed: %d!\n", __func__, ret);
 		goto fail;
@@ -986,6 +994,8 @@ static int usbatm_atm_init(struct usbatm_data *instance)
 	return 0;
 
  fail:
+	sysfs_remove_link(&atm_dev->class_dev.kobj, "device");
+ fail_sysfs:
 	instance->atm_dev = NULL;
 	atm_dev_deregister(atm_dev); /* usbatm_atm_dev_close will eventually be called */
 	return ret;
@@ -1318,8 +1328,10 @@ void usbatm_usb_disconnect(struct usb_interface *intf)
 	kfree(instance->cell_buf);
 
 	/* ATM finalize */
-	if (instance->atm_dev)
+	if (instance->atm_dev) {
+		sysfs_remove_link(&instance->atm_dev->class_dev.kobj, "device");
 		atm_dev_deregister(instance->atm_dev);
+	}
 
 	usbatm_put_instance(instance);	/* taken in usbatm_usb_probe */
 }
-- 
1.5.1.2


-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel