[PATCH 62/78] USB: BandRich BandLuxe HSDPA Data Card Driver
Greg Kroah-Hartman <[email protected]>
| Newsgroups | gmane.linux.usb.devel |
|---|---|
| Message-ID | <[email protected]> |
From: Leon Leong <[email protected]> Add the detection for the BandRich BandLuxe C100/C100S/C120 HSDPA Data Card. With the vendor and product IDs are set properly, the data card can be detected and works fine. Signed-off-by: Leon Leong <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> --- drivers/usb/serial/option.c | 6 ++++++ 1 files changed, 6 insertions(+), 0 deletions(-) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 2846656..f3859d3 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -113,6 +113,10 @@ static int option_send_setup(struct usb_serial_port *port); #define ANYDATA_VENDOR_ID 0x16d5 #define ANYDATA_PRODUCT_ID 0x6501 +#define BANDRICH_VENDOR_ID 0x1A8D +#define BANDRICH_PRODUCT_C100_1 0x1002 +#define BANDRICH_PRODUCT_C100_2 0x1003 + static struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) }, @@ -165,6 +169,8 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x2130) }, /* Novatel Merlin ES620 SM Bus */ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x2410) }, /* Novatel EU740 */ { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ID) }, + { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_1) }, + { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_2) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); -- 1.5.1.2 ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ [email protected] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel