Unusual dev addition for memory stick?

Hello all,

This is the output of the devices file of our (1 Gb) memory stick:

T:  Bus=01 Lev=02 Prnt=02 Port=03 Cnt=01 Dev#=  5 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=058f ProdID=6387 Rev= 1.43
S:  Manufacturer=Generic
S:  Product=Mass Storage
S:  SerialNumber=5C19D733
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

I included the /var/log/messages file, but if attachments don't come
through, this is a snippet:
usb1001 usb-storage: Bulk status result = 0
usb1001 usb-storage: Bulk Status S 0x53425355 T 0x17 R 122880 Stat 0x1
usb1001 usb-storage: -- transport indicates command failure
usb1001 usb-storage: -- unexpectedly short transfer
usb1001 usb-storage: Issuing auto-REQUEST_SENSE
usb1001 usb-storage: Bulk Command S 0x43425355 T 0x18 L 18 F 128 Trg 0 LUN 0
CL 6
usb1001 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb1001 usb-storage: Status code 0; transferred 31/31
usb1001 usb-storage: -- transfer complete


I found (through other posts on the list), there might be a problem with
residual bytes. I checked the messages file, and found this might be the
case (R 122880 above). To try to enable this ignore flag, I added the
following to my 2.6.19-gentoo-r5 kernel unusual_devs.h:

UNUSUAL_DEV(  0x058f, 0x6387, 0x0000, 0x9999,
                "Generic",
                "Mass Storage",
                US_SC_DEVICE, US_PR_DEVICE, NULL,
                US_FL_IGNORE_RESIDUE | US_FL_SINGLE_LUN),


After rebuilding the kernel, and restarting, there's no difference in the
messages output. Can anyone confirm I'm adding the correct UNUSUAL_DEV
statements?

Best regards,
Marco Polet
CopyMaster International B.V.
The Netherlands

-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/

_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel