Re: [Bugme-new] [Bug 8444] New: 16GB USB Stick not working

Andrew Morton <[email protected]>
Newsgroups gmane.linux.usb.devel
Message-ID <[email protected]> 
On Mon, 7 May 2007 08:52:37 -0700
[email protected] wrote:

> http://bugzilla.kernel.org/show_bug.cgi?id=8444
> 
>            Summary: 16GB USB Stick not working
>     Kernel Version: 2.6.21.1
>             Status: NEW
>           Severity: normal
>              Owner: [email protected]
>          Submitter: [email protected]
> 
> 
> Distribution:
> Debian Unstable
> 
> Hardware Environment:
> Dell Precision 300
> 
> 00:00.0 Host bridge: Intel Corporation 82955X Memory Controller Hub
> 00:01.0 PCI bridge: Intel Corporation 82955X PCI Express Root Port
> 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition
> Audio Controller (rev 01)
> 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1
> (rev 01)
> 00:1c.4 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express
> Port 5 (rev 01)
> 00:1c.5 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express
> Port 6 (rev 01)
> 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01)
> 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01)
> 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01)
> 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 01)
> 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI
> Controller (rev 01)
> 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
> 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface
> Bridge (rev 01)
> 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller
> (rev 01)
> 00:1f.2 SATA controller: Intel Corporation 82801GR/GH (ICH7 Family) Serial ATA
> Storage Controller AHCI (rev 01)
> 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
> 01:00.0 VGA compatible controller: nVidia Corporation NV44 [Quadro NVS 285] (rev a1)
> 03:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5721 Gigabit
> Ethernet PCI Express (rev 11)
> 04:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751 Gigabit
> Ethernet PCI Express (rev 01)
> 05:02.0 FireWire (IEEE 1394): Agere Systems FW323 (rev 61)
> 
> 
> Problem Description:
> 16GB version of the Corsair Flash Voyager isn't recognized.
> dmesg output:
> [  306.444319] hub 1-0:1.0: hub_suspend
> [  306.444338] ehci_hcd 0000:00:1d.7: suspend root hub
> [  306.444360] usb usb1: usb auto-suspend
> [  310.697665] hub 1-0:1.0: state 8 ports 8 chg 0000 evt 0000
> [  310.697673] usb usb1: usb auto-resume
> [  310.697676] usb usb1: finish resume
> [  310.697695] hub 1-0:1.0: hub_resume
> [  310.697699] ehci_hcd 0000:00:1d.7: resume root hub
> [  310.730267] ehci_hcd 0000:00:1d.7: GetStatus port 8 status 001803 POWER sig=j
> CSC CONNECT
> [  310.730279] hub 1-0:1.0: port 8, status 0501, change 0001, 480 Mb/s
> [  310.850032] hub 1-0:1.0: debounce: port 8: total 100ms stable 100ms status 0x501
> [  310.903505] ehci_hcd 0000:00:1d.7: port 8 high speed
> [  310.903512] ehci_hcd 0000:00:1d.7: GetStatus port 8 status 001005 POWER
> sig=se0 PE CONNECT
> [  310.956516] usb 1-8: new high speed USB device using ehci_hcd and address 9
> [  311.954802] usb 1-8: khubd timed out on ep0in len=0/64
> [  312.896747] ehci_hcd 0000:00:1d.7: port 8 high speed
> [  312.896756] ehci_hcd 0000:00:1d.7: GetStatus port 8 status 001005 POWER
> sig=se0 PE CONNECT
> [  312.949778] usb 1-8: device descriptor read/64, error -32
> [  313.106392] ehci_hcd 0000:00:1d.7: port 8 high speed
> [  313.106400] ehci_hcd 0000:00:1d.7: GetStatus port 8 status 001005 POWER
> sig=se0 PE CONNECT
> [  313.159438] usb 1-8: device descriptor read/64, error -32
> [  313.316035] ehci_hcd 0000:00:1d.7: port 8 high speed
> [  313.316043] ehci_hcd 0000:00:1d.7: GetStatus port 8 status 001005 POWER
> sig=se0 PE CONNECT
> [  313.369090] usb 1-8: new high speed USB device using ehci_hcd and address 10
> [  313.422479] ehci_hcd 0000:00:1d.7: port 8 high speed
> [  313.422486] ehci_hcd 0000:00:1d.7: GetStatus port 8 status 001005 POWER
> sig=se0 PE CONNECT
> [  313.475536] usb 1-8: device descriptor read/64, error -32
> [  313.632123] ehci_hcd 0000:00:1d.7: port 8 high speed
> [  313.632130] ehci_hcd 0000:00:1d.7: GetStatus port 8 status 001005 POWER
> sig=se0 PE CONNECT
> [  313.685176] usb 1-8: device descriptor read/64, error -32
> [  313.841768] ehci_hcd 0000:00:1d.7: port 8 high speed
> [  313.841776] ehci_hcd 0000:00:1d.7: GetStatus port 8 status 001005 POWER
> sig=se0 PE CONNECT
> [  313.894819] usb 1-8: new high speed USB device using ehci_hcd and address 11
> [  314.300786] usb 1-8: device not accepting address 11, error -32
> [  314.354273] ehci_hcd 0000:00:1d.7: port 8 high speed
> [  314.354281] ehci_hcd 0000:00:1d.7: GetStatus port 8 status 001005 POWER
> sig=se0 PE CONNECT
> [  314.407277] usb 1-8: new high speed USB device using ehci_hcd and address 12
> [  314.813259] usb 1-8: device not accepting address 12, error -32
> [  314.813283] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0000
> [  316.809938] hub 1-0:1.0: hub_suspend
> [  316.809952] ehci_hcd 0000:00:1d.7: suspend root hub
> [  316.809973] usb usb1: usb auto-suspend
> [  345.712362] hub 1-0:1.0: state 8 ports 8 chg 0000 evt 0000
> [  345.712370] usb usb1: usb auto-resume
> [  345.712373] usb usb1: finish resume
> [  345.712381] hub 1-0:1.0: hub_resume
> [  345.712385] ehci_hcd 0000:00:1d.7: resume root hub
> [  345.743656] ehci_hcd 0000:00:1d.7: GetStatus port 8 status 001002 POWER
> sig=se0 CSC
> [  345.743666] hub 1-0:1.0: port 8, status 0100, change 0001, 12 Mb/s
> [  345.863435] hub 1-0:1.0: debounce: port 8: total 100ms stable 100ms status 0x100
> [  345.863443] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0000
> [  347.860016] hub 1-0:1.0: hub_suspend
> [  347.860026] ehci_hcd 0000:00:1d.7: suspend root hub
> [  347.860047] usb usb1: usb auto-suspend
> 
> I also tried kernel version 2.6.18.8. Same problem.

-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.