[PATCH] USB: rework C++-style comments

This patch (as911) replaces some C++-style commented-out debugging
lines in driver.c with a new "verbose debugging" macro.  It makes the
code look cleaner, and it's easier to turn the debugging on or off.

Signed-off-by: Alan Stern <[email protected]>

---

Index: usb-2.6/drivers/usb/core/driver.c
===================================================================
--- usb-2.6.orig/drivers/usb/core/driver.c
+++ usb-2.6/drivers/usb/core/driver.c
@@ -28,6 +28,14 @@
 #include "hcd.h"
 #include "usb.h"
 
+#define VERBOSE_DEBUG	0
+
+#if VERBOSE_DEBUG
+#define dev_vdbg	dev_dbg
+#else
+#define dev_vdbg(dev, fmt, args...)	do { } while (0)
+#endif
+
 #ifdef CONFIG_HOTPLUG
 
 /*
@@ -811,8 +819,8 @@ static int usb_suspend_device(struct usb
 	}
 	status = udriver->suspend(udev, msg);
 
-done:
-	// dev_dbg(&udev->dev, "%s: status %d\n", __FUNCTION__, status);
+ done:
+	dev_vdbg(&udev->dev, "%s: status %d\n", __FUNCTION__, status);
 	if (status == 0)
 		udev->dev.power.power_state.event = msg.event;
 	return status;
@@ -837,8 +845,8 @@ static int usb_resume_device(struct usb_
 	udriver = to_usb_device_driver(udev->dev.driver);
 	status = udriver->resume(udev);
 
-done:
-	// dev_dbg(&udev->dev, "%s: status %d\n", __FUNCTION__, status);
+ done:
+	dev_vdbg(&udev->dev, "%s: status %d\n", __FUNCTION__, status);
 	if (status == 0) {
 		udev->autoresume_disabled = 0;
 		udev->dev.power.power_state.event = PM_EVENT_ON;
@@ -876,8 +884,8 @@ static int usb_suspend_interface(struct 
 		mark_quiesced(intf);
 	}
 
-done:
-	// dev_dbg(&intf->dev, "%s: status %d\n", __FUNCTION__, status);
+ done:
+	dev_vdbg(&intf->dev, "%s: status %d\n", __FUNCTION__, status);
 	return status;
 }
 
@@ -915,8 +923,8 @@ static int usb_resume_interface(struct u
 		mark_active(intf);
 	}
 
-done:
-	// dev_dbg(&intf->dev, "%s: status %d\n", __FUNCTION__, status);
+ done:
+	dev_vdbg(&intf->dev, "%s: status %d\n", __FUNCTION__, status);
 	return status;
 }
 
@@ -1078,7 +1086,7 @@ static int usb_suspend_both(struct usb_d
 	}
 
  done:
-	// dev_dbg(&udev->dev, "%s: status %d\n", __FUNCTION__, status);
+	dev_vdbg(&udev->dev, "%s: status %d\n", __FUNCTION__, status);
 	return status;
 }
 
@@ -1175,7 +1183,7 @@ static int usb_resume_both(struct usb_de
 	}
 
  done:
-	// dev_dbg(&udev->dev, "%s: status %d\n", __FUNCTION__, status);
+	dev_vdbg(&udev->dev, "%s: status %d\n", __FUNCTION__, status);
 	return status;
 }
 
@@ -1242,8 +1250,8 @@ void usb_autosuspend_device(struct usb_d
 	int	status;
 
 	status = usb_autopm_do_device(udev, -1);
-	// dev_dbg(&udev->dev, "%s: cnt %d\n",
-	//		__FUNCTION__, udev->pm_usage_cnt);
+	dev_vdbg(&udev->dev, "%s: cnt %d\n",
+			__FUNCTION__, udev->pm_usage_cnt);
 }
 
 /**
@@ -1262,8 +1270,8 @@ void usb_autosuspend_device(struct usb_d
 void usb_try_autosuspend_device(struct usb_device *udev)
 {
 	usb_autopm_do_device(udev, 0);
-	// dev_dbg(&udev->dev, "%s: cnt %d\n",
-	// 		__FUNCTION__, udev->pm_usage_cnt);
+	dev_vdbg(&udev->dev, "%s: cnt %d\n",
+			__FUNCTION__, udev->pm_usage_cnt);
 }
 
 /**
@@ -1290,8 +1298,8 @@ int usb_autoresume_device(struct usb_dev
 	int	status;
 
 	status = usb_autopm_do_device(udev, 1);
-	// dev_dbg(&udev->dev, "%s: status %d cnt %d\n",
-	//		__FUNCTION__, status, udev->pm_usage_cnt);
+	dev_vdbg(&udev->dev, "%s: status %d cnt %d\n",
+			__FUNCTION__, status, udev->pm_usage_cnt);
 	return status;
 }
 
@@ -1363,8 +1371,8 @@ void usb_autopm_put_interface(struct usb
 	int	status;
 
 	status = usb_autopm_do_interface(intf, -1);
-	// dev_dbg(&intf->dev, "%s: status %d cnt %d\n",
-	//		__FUNCTION__, status, intf->pm_usage_cnt);
+	dev_vdbg(&intf->dev, "%s: status %d cnt %d\n",
+			__FUNCTION__, status, intf->pm_usage_cnt);
 }
 EXPORT_SYMBOL_GPL(usb_autopm_put_interface);
 
@@ -1407,8 +1415,8 @@ int usb_autopm_get_interface(struct usb_
 	int	status;
 
 	status = usb_autopm_do_interface(intf, 1);
-	// dev_dbg(&intf->dev, "%s: status %d cnt %d\n",
-	//		__FUNCTION__, status, intf->pm_usage_cnt);
+	dev_vdbg(&intf->dev, "%s: status %d cnt %d\n",
+			__FUNCTION__, status, intf->pm_usage_cnt);
 	return status;
 }
 EXPORT_SYMBOL_GPL(usb_autopm_get_interface);
@@ -1429,8 +1437,8 @@ int usb_autopm_set_interface(struct usb_
 	int	status;
 
 	status = usb_autopm_do_interface(intf, 0);
-	// dev_dbg(&intf->dev, "%s: status %d cnt %d\n",
-	//		__FUNCTION__, status, intf->pm_usage_cnt);
+	dev_vdbg(&intf->dev, "%s: status %d cnt %d\n",
+			__FUNCTION__, status, intf->pm_usage_cnt);
 	return status;
 }
 EXPORT_SYMBOL_GPL(usb_autopm_set_interface);


-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel