Re: [Bugme-new] [Bug 8606] New: USB printer shows up in /proc/bus/usb/devices, but gives ENODEV on access

On Sun, 10 Jun 2007 06:52:23 -0700 [email protected] wrote:

> http://bugzilla.kernel.org/show_bug.cgi?id=8606
> 
>            Summary: USB printer shows up in /proc/bus/usb/devices, but gives
>                     ENODEV on access
>     Kernel Version: 2.6.22-rc4
>             Status: NEW
>           Severity: normal
>              Owner: [email protected]
>          Submitter: [email protected]
> 
> 
> Most recent kernel where this bug did *NOT* occur: 2.6.19.2 (but downgrading now
> doesn't seem to fix it?)
> 
> Distribution: Debian testing
> 
> Hardware Environment: 
> 
> 00:00.0 Host bridge: ATI Technologies Inc ATI Radeon Xpress 200
> (RS480/RS482/RX480/RX482) Chipset - Host bridge (rev 01)
> 00:02.0 PCI bridge: ATI Technologies Inc RS480 PCI-X Root Port
> 00:11.0 IDE interface: ATI Technologies Inc ATI 437A Serial ATA Controller
> 00:12.0 IDE interface: ATI Technologies Inc ATI 4379 Serial ATA Controller
> 00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller
> 00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller
> 00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller
> 00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 11)
> 00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE
> Controller ATI
> 00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge
> 00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge
> 00:14.5 Multimedia audio controller: ATI Technologies Inc IXP SB400 AC'97 Audio
> Controller (rev 02)
> 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
> HyperTransport Technology Configuration
> 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
> 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM
> Controller
> 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
> Miscellaneous Control
> 01:00.0 VGA compatible controller: nVidia Corporation NV44 [GeForce 6200
> TurboCache(TM)] (rev a1)
> 02:02.0 Multimedia controller: Philips Semiconductors SAA7130 Video Broadcast
> Decoder (rev 01)
> 02:03.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit
> Ethernet (rev 10)
> 02:05.0 Ethernet controller: Atheros Communications, Inc. AR5005G 802.11abg NIC
> (rev 01)
> 
> Problem Description:
> 
> I have a USB printer (Samsung ML-2010) that, when I plug it in, shows up in
> /proc/bus/usb/devices (and gets detected according to dmesg), but when I try to
> access any device file related to it, I get "Error: no such device". (For
> example, echo "blech" > /dev/usb/lp0.) Accordingly, the printer does not show up
> in lsusb and CUPS also thinks that it's disconnected. The printer (and cable)
> work fine on my IBM Thinkpad R52.
> 

and

> Just FYI, I've reproduced this without madwifi and the nvidia kernel module, in
> case you were wondering.

-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel