Re: USB to Ethernet, Davicom DM9601
"Jon Smirl" <[email protected]>
| Newsgroups | gmane.linux.usb.devel |
|---|---|
| Message-ID | <[email protected]> |
It looks like the driver is broken. I put the device into a Windows
laptop and it works fine.
Note that ifconfig doesn't say the interface is RUNNING.
It is UP and I gave it a static IP but it still isn't RUNNING.
eth1 Link encap:Ethernet HWaddr 00:60:6E:BF:25:89
inet addr:192.168.1.21 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:73 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:22225 (21.7 KiB) TX bytes:0 (0.0 b)
[ 8514.301520] eth1: register 'dm9601' at usb-0000:00:1d.0-2.4,
Davicom DM9601 USB Ethernet, 00:60:6e:bf:25:89
[ 8514.301562] PM: Adding info for No Bus:usbdev1.8
[ 8514.422082] eth1: link down
[ 8514.439600] ADDRCONF(NETDEV_UP): eth1: link is not ready
Lights on the router indicated that the router is happy with the link.
Same router, cable and device work on the Windows laptop.
--
Jon Smirl
[email protected]
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel