Re: USB to Ethernet, Davicom DM9601

Peter Korsgaard <[email protected]>
Newsgroups gmane.linux.usb.devel
Message-ID <[email protected]>
>>>>> "Jon" == Jon Smirl <[email protected]> writes:

 Jon> It looks like the driver is broken. I put the device into a Windows
 Jon> laptop and it works fine.

 Jon> Note that ifconfig doesn't say the interface is RUNNING.
 Jon> It is UP and I gave it a static IP but it still isn't RUNNING.

 Jon> eth1      Link encap:Ethernet  HWaddr 00:60:6E:BF:25:89
 Jon>         inet addr:192.168.1.21  Bcast:192.168.1.255  Mask:255.255.255.0
 Jon>         UP BROADCAST MULTICAST  MTU:1500  Metric:1
 Jon>         RX packets:73 errors:0 dropped:0 overruns:0 frame:0
 Jon>         TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
 Jon>         collisions:0 txqueuelen:1000
 Jon>         RX bytes:22225 (21.7 KiB)  TX bytes:0 (0.0 b)

 Jon> [ 8514.301520] eth1: register 'dm9601' at usb-0000:00:1d.0-2.4,
 Jon> Davicom DM9601 USB Ethernet, 00:60:6e:bf:25:89
 Jon> [ 8514.301562] PM: Adding info for No Bus:usbdev1.8
 Jon> [ 8514.422082] eth1: link down
 Jon> [ 8514.439600] ADDRCONF(NETDEV_UP): eth1: link is not ready

Odd, it doesn't seem to detect the link. Does it help to down and
re-up the interface?

Here it works:

 % /sbin/ifconfig eth2
eth2      Link encap:Ethernet  HWaddr 00:00:00:00:1C:16
          inet addr:10.0.0.5  Bcast:10.255.255.255  Mask:255.0.0.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:390640 errors:0 dropped:0 overruns:0 frame:0
          TX packets:580141 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:26031463 (24.8 MiB)  TX bytes:638388028 (608.8 MiB)

-- 
Bye, Peter Korsgaard


-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.