Re: USB to Ethernet, Davicom DM9601
"Jon Smirl" <[email protected]>
| Newsgroups | gmane.linux.usb.devel |
|---|---|
| Message-ID | <[email protected]> |
On 6/27/07, Peter Korsgaard <[email protected]> wrote: > >>>>> "Jon" == Jon Smirl <[email protected]> writes: > > Jon> It looks like the driver is broken. I put the device into a Windows > Jon> laptop and it works fine. > > Jon> Note that ifconfig doesn't say the interface is RUNNING. > Jon> It is UP and I gave it a static IP but it still isn't RUNNING. > > Jon> eth1 Link encap:Ethernet HWaddr 00:60:6E:BF:25:89 > Jon> inet addr:192.168.1.21 Bcast:192.168.1.255 Mask:255.255.255.0 > Jon> UP BROADCAST MULTICAST MTU:1500 Metric:1 > Jon> RX packets:73 errors:0 dropped:0 overruns:0 frame:0 > Jon> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 > Jon> collisions:0 txqueuelen:1000 > Jon> RX bytes:22225 (21.7 KiB) TX bytes:0 (0.0 b) > > Jon> [ 8514.301520] eth1: register 'dm9601' at usb-0000:00:1d.0-2.4, > Jon> Davicom DM9601 USB Ethernet, 00:60:6e:bf:25:89 > Jon> [ 8514.301562] PM: Adding info for No Bus:usbdev1.8 > Jon> [ 8514.422082] eth1: link down > Jon> [ 8514.439600] ADDRCONF(NETDEV_UP): eth1: link is not ready > > Odd, it doesn't seem to detect the link. Does it help to down and > re-up the interface? Yes, and ifconfig eth1 down, ifconfig eth1 up, will fix the condition. This is 100% repeatable, I tried it about five times. On initial insertion the link is not ready, ifconfig up/down clears the problem. So it appears to be something with the first time the driver initializes. > > Here it works: > > % /sbin/ifconfig eth2 > eth2 Link encap:Ethernet HWaddr 00:00:00:00:1C:16 > inet addr:10.0.0.5 Bcast:10.255.255.255 Mask:255.0.0.0 > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > RX packets:390640 errors:0 dropped:0 overruns:0 frame:0 > TX packets:580141 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:1000 > RX bytes:26031463 (24.8 MiB) TX bytes:638388028 (608.8 MiB) > > -- > Bye, Peter Korsgaard > > -- Jon Smirl [email protected] ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ [email protected] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel