[patch 2.6.22-rc6] usb g adget stack: remove usb_ep_*_buffer( ), part 2
David Brownell <[email protected]>
| Newsgroups | gmane.linux.usb.devel |
|---|---|
| Message-ID | <[email protected]> |
This patch removes controller driver infrastructure which supported
the now-removed usb_ep_{alloc,free}_buffer() calls.
As can be seen, many of the implementations of this were broken to
various degrees. Many didn't properly return dma-coherent mappings;
those which did so were necessarily ugly because of bogosity in the
underlying dma_free_coherent() calls ... which on many platforms
can't be called from the same contexts (notably in_irq) from which
their dma_alloc_coherent() sibling can be called.
The main potential downside of removing this is that gadget drivers
wouldn't have specific knowledge that the controller drivers have:
endpoints that aren't dma-capable don't need any dma mappings at all.
Signed-off-by: David Brownell <[email protected]>
---
n.b. goes on top of "part 1" and the pxa dma cleanup patch.
drivers/usb/gadget/at91_udc.c | 21 -------
drivers/usb/gadget/dummy_hcd.c | 36 ------------
drivers/usb/gadget/fsl_usb2_udc.c | 36 ------------
drivers/usb/gadget/goku_udc.c | 48 ----------------
drivers/usb/gadget/lh7a40x_udc.c | 27 ---------
drivers/usb/gadget/net2280.c | 97 ----------------------------------
drivers/usb/gadget/omap_udc.c | 108 --------------------------------------
drivers/usb/gadget/pxa2xx_udc.c | 23 --------
drivers/usb/gadget/s3c2410_udc.c | 33 -----------
include/linux/usb_gadget.h | 7 --
10 files changed, 436 deletions(-)
--- g26.orig/include/linux/usb_gadget.h 2007-07-01 12:10:23.000000000 -0700
+++ g26/include/linux/usb_gadget.h 2007-07-01 12:11:17.000000000 -0700
@@ -110,13 +110,6 @@ struct usb_ep_ops {
gfp_t gfp_flags);
void (*free_request) (struct usb_ep *ep, struct usb_request *req);
- void *(*alloc_buffer) (struct usb_ep *ep, unsigned bytes,
- dma_addr_t *dma, gfp_t gfp_flags);
- void (*free_buffer) (struct usb_ep *ep, void *buf, dma_addr_t dma,
- unsigned bytes);
- // NOTE: on 2.6, drivers may also use dma_map() and
- // dma_sync_single_*() to directly manage dma overhead.
-
int (*queue) (struct usb_ep *ep, struct usb_request *req,
gfp_t gfp_flags);
int (*dequeue) (struct usb_ep *ep, struct usb_request *req);
--- g26.orig/drivers/usb/gadget/at91_udc.c 2007-07-01 12:10:22.000000000 -0700
+++ g26/drivers/usb/gadget/at91_udc.c 2007-07-01 12:11:17.000000000 -0700
@@ -601,25 +601,6 @@ static void at91_ep_free_request(struct
kfree(req);
}
-static void *at91_ep_alloc_buffer(
- struct usb_ep *_ep,
- unsigned bytes,
- dma_addr_t *dma,
- gfp_t gfp_flags)
-{
- *dma = ~0;
- return kmalloc(bytes, gfp_flags);
-}
-
-static void at91_ep_free_buffer(
- struct usb_ep *ep,
- void *buf,
- dma_addr_t dma,
- unsigned bytes)
-{
- kfree(buf);
-}
-
static int at91_ep_queue(struct usb_ep *_ep,
struct usb_request *_req, gfp_t gfp_flags)
{
@@ -788,8 +769,6 @@ static const struct usb_ep_ops at91_ep_o
.disable = at91_ep_disable,
.alloc_request = at91_ep_alloc_request,
.free_request = at91_ep_free_request,
- .alloc_buffer = at91_ep_alloc_buffer,
- .free_buffer = at91_ep_free_buffer,
.queue = at91_ep_queue,
.dequeue = at91_ep_dequeue,
.set_halt = at91_ep_set_halt,
--- g26.orig/drivers/usb/gadget/dummy_hcd.c 2007-07-01 12:10:23.000000000 -0700
+++ g26/drivers/usb/gadget/dummy_hcd.c 2007-07-01 12:11:17.000000000 -0700
@@ -497,38 +497,6 @@ dummy_free_request (struct usb_ep *_ep,
kfree (req);
}
-static void *
-dummy_alloc_buffer (
- struct usb_ep *_ep,
- unsigned bytes,
- dma_addr_t *dma,
- gfp_t mem_flags
-) {
- char *retval;
- struct dummy_ep *ep;
- struct dummy *dum;
-
- ep = usb_ep_to_dummy_ep (_ep);
- dum = ep_to_dummy (ep);
-
- if (!dum->driver)
- return NULL;
- retval = kmalloc (bytes, mem_flags);
- *dma = (dma_addr_t) retval;
- return retval;
-}
-
-static void
-dummy_free_buffer (
- struct usb_ep *_ep,
- void *buf,
- dma_addr_t dma,
- unsigned bytes
-) {
- if (bytes)
- kfree (buf);
-}
-
static void
fifo_complete (struct usb_ep *ep, struct usb_request *req)
{
@@ -659,10 +627,6 @@ static const struct usb_ep_ops dummy_ep_
.alloc_request = dummy_alloc_request,
.free_request = dummy_free_request,
- .alloc_buffer = dummy_alloc_buffer,
- .free_buffer = dummy_free_buffer,
- /* map, unmap, ... eventually hook the "generic" dma calls */
-
.queue = dummy_queue,
.dequeue = dummy_dequeue,
--- g26.orig/drivers/usb/gadget/fsl_usb2_udc.c 2007-07-01 12:10:22.000000000 -0700
+++ g26/drivers/usb/gadget/fsl_usb2_udc.c 2007-07-01 12:11:17.000000000 -0700
@@ -601,39 +601,6 @@ static void fsl_free_request(struct usb_
kfree(req);
}
-/*------------------------------------------------------------------
- * Allocate an I/O buffer
-*---------------------------------------------------------------------*/
-static void *fsl_alloc_buffer(struct usb_ep *_ep, unsigned bytes,
- dma_addr_t *dma, gfp_t gfp_flags)
-{
- struct fsl_ep *ep;
-
- if (!_ep)
- return NULL;
-
- ep = container_of(_ep, struct fsl_ep, ep);
-
- return dma_alloc_coherent(ep->udc->gadget.dev.parent,
- bytes, dma, gfp_flags);
-}
-
-/*------------------------------------------------------------------
- * frees an i/o buffer
-*---------------------------------------------------------------------*/
-static void fsl_free_buffer(struct usb_ep *_ep, void *buf,
- dma_addr_t dma, unsigned bytes)
-{
- struct fsl_ep *ep;
-
- if (!_ep)
- return;
-
- ep = container_of(_ep, struct fsl_ep, ep);
-
- dma_free_coherent(ep->udc->gadget.dev.parent, bytes, buf, dma);
-}
-
/*-------------------------------------------------------------------------*/
static int fsl_queue_td(struct fsl_ep *ep, struct fsl_req *req)
{
@@ -1047,9 +1014,6 @@ static struct usb_ep_ops fsl_ep_ops = {
.alloc_request = fsl_alloc_request,
.free_request = fsl_free_request,
- .alloc_buffer = fsl_alloc_buffer,
- .free_buffer = fsl_free_buffer,
-
.queue = fsl_ep_queue,
.dequeue = fsl_ep_dequeue,
--- g26.orig/drivers/usb/gadget/goku_udc.c 2007-07-01 12:10:23.000000000 -0700
+++ g26/drivers/usb/gadget/goku_udc.c 2007-07-01 12:11:17.000000000 -0700
@@ -296,51 +296,6 @@ goku_free_request(struct usb_ep *_ep, st
/*-------------------------------------------------------------------------*/
-/* allocating buffers this way eliminates dma mapping overhead, which
- * on some platforms will mean eliminating a per-io buffer copy. with
- * some kinds of system caches, further tweaks may still be needed.
- */
-static void *
-goku_alloc_buffer(struct usb_ep *_ep, unsigned bytes,
- dma_addr_t *dma, gfp_t gfp_flags)
-{
- void *retval;
- struct goku_ep *ep;
-
- ep = container_of(_ep, struct goku_ep, ep);
- if (!_ep)
- return NULL;
- *dma = DMA_ADDR_INVALID;
-
- if (ep->dma) {
- /* the main problem with this call is that it wastes memory
- * on typical 1/N page allocations: it allocates 1-N pages.
- */
-#warning Using dma_alloc_coherent even with buffers smaller than a page.
- retval = dma_alloc_coherent(&ep->dev->pdev->dev,
- bytes, dma, gfp_flags);
- } else
- retval = kmalloc(bytes, gfp_flags);
- return retval;
-}
-
-static void
-goku_free_buffer(struct usb_ep *_ep, void *buf, dma_addr_t dma, unsigned bytes)
-{
- /* free memory into the right allocator */
- if (dma != DMA_ADDR_INVALID) {
- struct goku_ep *ep;
-
- ep = container_of(_ep, struct goku_ep, ep);
- if (!_ep)
- return;
- dma_free_coherent(&ep->dev->pdev->dev, bytes, buf, dma);
- } else
- kfree (buf);
-}
-
-/*-------------------------------------------------------------------------*/
-
static void
done(struct goku_ep *ep, struct goku_request *req, int status)
{
@@ -1026,9 +981,6 @@ static struct usb_ep_ops goku_ep_ops = {
.alloc_request = goku_alloc_request,
.free_request = goku_free_request,
- .alloc_buffer = goku_alloc_buffer,
- .free_buffer = goku_free_buffer,
-
.queue = goku_queue,
.dequeue = goku_dequeue,
--- g26.orig/drivers/usb/gadget/lh7a40x_udc.c 2007-07-01 12:10:22.000000000 -0700
+++ g26/drivers/usb/gadget/lh7a40x_udc.c 2007-07-01 12:11:17.000000000 -0700
@@ -75,10 +75,6 @@ static int lh7a40x_ep_enable(struct usb_
static int lh7a40x_ep_disable(struct usb_ep *ep);
static struct usb_request *lh7a40x_alloc_request(struct usb_ep *ep, gfp_t);
static void lh7a40x_free_request(struct usb_ep *ep, struct usb_request *);
-static void *lh7a40x_alloc_buffer(struct usb_ep *ep, unsigned, dma_addr_t *,
- gfp_t);
-static void lh7a40x_free_buffer(struct usb_ep *ep, void *, dma_addr_t,
- unsigned);
static int lh7a40x_queue(struct usb_ep *ep, struct usb_request *, gfp_t);
static int lh7a40x_dequeue(struct usb_ep *ep, struct usb_request *);
static int lh7a40x_set_halt(struct usb_ep *ep, int);
@@ -104,9 +100,6 @@ static struct usb_ep_ops lh7a40x_ep_ops
.alloc_request = lh7a40x_alloc_request,
.free_request = lh7a40x_free_request,
- .alloc_buffer = lh7a40x_alloc_buffer,
- .free_buffer = lh7a40x_free_buffer,
-
.queue = lh7a40x_queue,
.dequeue = lh7a40x_dequeue,
@@ -1134,26 +1127,6 @@ static void lh7a40x_free_request(struct
kfree(req);
}
-static void *lh7a40x_alloc_buffer(struct usb_ep *ep, unsigned bytes,
- dma_addr_t * dma, gfp_t gfp_flags)
-{
- char *retval;
-
- DEBUG("%s (%p, %d, %d)\n", __FUNCTION__, ep, bytes, gfp_flags);
-
- retval = kmalloc(bytes, gfp_flags & ~(__GFP_DMA | __GFP_HIGHMEM));
- if (retval)
- *dma = virt_to_bus(retval);
- return retval;
-}
-
-static void lh7a40x_free_buffer(struct usb_ep *ep, void *buf, dma_addr_t dma,
- unsigned bytes)
-{
- DEBUG("%s, %p\n", __FUNCTION__, ep);
- kfree(buf);
-}
-
/** Queue one request
* Kickstart transfer if needed
* NOTE: Sets INDEX register
--- g26.orig/drivers/usb/gadget/net2280.c 2007-07-01 12:10:22.000000000 -0700
+++ g26/drivers/usb/gadget/net2280.c 2007-07-01 12:11:17.000000000 -0700
@@ -450,100 +450,6 @@ net2280_free_request (struct usb_ep *_ep
/*-------------------------------------------------------------------------*/
-/*
- * dma-coherent memory allocation (for dma-capable endpoints)
- *
- * NOTE: the dma_*_coherent() API calls suck. Most implementations are
- * (a) page-oriented, so small buffers lose big; and (b) asymmetric with
- * respect to calls with irqs disabled: alloc is safe, free is not.
- * We currently work around (b), but not (a).
- */
-
-static void *
-net2280_alloc_buffer (
- struct usb_ep *_ep,
- unsigned bytes,
- dma_addr_t *dma,
- gfp_t gfp_flags
-)
-{
- void *retval;
- struct net2280_ep *ep;
-
- ep = container_of (_ep, struct net2280_ep, ep);
- if (!_ep)
- return NULL;
- *dma = DMA_ADDR_INVALID;
-
- if (ep->dma)
- retval = dma_alloc_coherent(&ep->dev->pdev->dev,
- bytes, dma, gfp_flags);
- else
- retval = kmalloc(bytes, gfp_flags);
- return retval;
-}
-
-static DEFINE_SPINLOCK(buflock);
-static LIST_HEAD(buffers);
-
-struct free_record {
- struct list_head list;
- struct device *dev;
- unsigned bytes;
- dma_addr_t dma;
-};
-
-static void do_free(unsigned long ignored)
-{
- spin_lock_irq(&buflock);
- while (!list_empty(&buffers)) {
- struct free_record *buf;
-
- buf = list_entry(buffers.next, struct free_record, list);
- list_del(&buf->list);
- spin_unlock_irq(&buflock);
-
- dma_free_coherent(buf->dev, buf->bytes, buf, buf->dma);
-
- spin_lock_irq(&buflock);
- }
- spin_unlock_irq(&buflock);
-}
-
-static DECLARE_TASKLET(deferred_free, do_free, 0);
-
-static void
-net2280_free_buffer (
- struct usb_ep *_ep,
- void *address,
- dma_addr_t dma,
- unsigned bytes
-) {
- /* free memory into the right allocator */
- if (dma != DMA_ADDR_INVALID) {
- struct net2280_ep *ep;
- struct free_record *buf = address;
- unsigned long flags;
-
- ep = container_of(_ep, struct net2280_ep, ep);
- if (!_ep)
- return;
-
- ep = container_of (_ep, struct net2280_ep, ep);
- buf->dev = &ep->dev->pdev->dev;
- buf->bytes = bytes;
- buf->dma = dma;
-
- spin_lock_irqsave(&buflock, flags);
- list_add_tail(&buf->list, &buffers);
- tasklet_schedule(&deferred_free);
- spin_unlock_irqrestore(&buflock, flags);
- } else
- kfree (address);
-}
-
-/*-------------------------------------------------------------------------*/
-
/* load a packet into the fifo we use for usb IN transfers.
* works for all endpoints.
*
@@ -1392,9 +1298,6 @@ static const struct usb_ep_ops net2280_e
.alloc_request = net2280_alloc_request,
.free_request = net2280_free_request,
- .alloc_buffer = net2280_alloc_buffer,
- .free_buffer = net2280_free_buffer,
-
.queue = net2280_queue,
.dequeue = net2280_dequeue,
--- g26.orig/drivers/usb/gadget/omap_udc.c 2007-07-01 12:10:23.000000000 -0700
+++ g26/drivers/usb/gadget/omap_udc.c 2007-07-01 12:11:17.000000000 -0700
@@ -296,111 +296,6 @@ omap_free_request(struct usb_ep *ep, str
/*-------------------------------------------------------------------------*/
-/*
- * dma-coherent memory allocation (for dma-capable endpoints)
- *
- * NOTE: the dma_*_coherent() API calls suck. Most implementations are
- * (a) page-oriented, so small buffers lose big; and (b) asymmetric with
- * respect to calls with irqs disabled: alloc is safe, free is not.
- * We currently work around (b), but not (a).
- */
-
-static void *
-omap_alloc_buffer(
- struct usb_ep *_ep,
- unsigned bytes,
- dma_addr_t *dma,
- gfp_t gfp_flags
-)
-{
- void *retval;
- struct omap_ep *ep;
-
- if (!_ep)
- return NULL;
-
- ep = container_of(_ep, struct omap_ep, ep);
- if (use_dma && ep->has_dma) {
- static int warned;
- if (!warned && bytes < PAGE_SIZE) {
- dev_warn(ep->udc->gadget.dev.parent,
- "using dma_alloc_coherent for "
- "small allocations wastes memory\n");
- warned++;
- }
- return dma_alloc_coherent(ep->udc->gadget.dev.parent,
- bytes, dma, gfp_flags);
- }
-
- retval = kmalloc(bytes, gfp_flags);
- if (retval)
- *dma = virt_to_phys(retval);
- return retval;
-}
-
-static DEFINE_SPINLOCK(buflock);
-static LIST_HEAD(buffers);
-
-struct free_record {
- struct list_head list;
- struct device *dev;
- unsigned bytes;
- dma_addr_t dma;
-};
-
-static void do_free(unsigned long ignored)
-{
- spin_lock_irq(&buflock);
- while (!list_empty(&buffers)) {
- struct free_record *buf;
-
- buf = list_entry(buffers.next, struct free_record, list);
- list_del(&buf->list);
- spin_unlock_irq(&buflock);
-
- dma_free_coherent(buf->dev, buf->bytes, buf, buf->dma);
-
- spin_lock_irq(&buflock);
- }
- spin_unlock_irq(&buflock);
-}
-
-static DECLARE_TASKLET(deferred_free, do_free, 0);
-
-static void omap_free_buffer(
- struct usb_ep *_ep,
- void *buf,
- dma_addr_t dma,
- unsigned bytes
-)
-{
- if (!_ep) {
- WARN_ON(1);
- return;
- }
-
- /* free memory into the right allocator */
- if (dma != DMA_ADDR_INVALID) {
- struct omap_ep *ep;
- struct free_record *rec = buf;
- unsigned long flags;
-
- ep = container_of(_ep, struct omap_ep, ep);
-
- rec->dev = ep->udc->gadget.dev.parent;
- rec->bytes = bytes;
- rec->dma = dma;
-
- spin_lock_irqsave(&buflock, flags);
- list_add_tail(&rec->list, &buffers);
- tasklet_schedule(&deferred_free);
- spin_unlock_irqrestore(&buflock, flags);
- } else
- kfree(buf);
-}
-
-/*-------------------------------------------------------------------------*/
-
static void
done(struct omap_ep *ep, struct omap_req *req, int status)
{
@@ -1271,9 +1166,6 @@ static struct usb_ep_ops omap_ep_ops = {
.alloc_request = omap_alloc_request,
.free_request = omap_free_request,
- .alloc_buffer = omap_alloc_buffer,
- .free_buffer = omap_free_buffer,
-
.queue = omap_ep_queue,
.dequeue = omap_ep_dequeue,
--- g26.orig/drivers/usb/gadget/pxa2xx_udc.c 2007-07-01 12:10:46.000000000 -0700
+++ g26/drivers/usb/gadget/pxa2xx_udc.c 2007-07-01 12:12:06.000000000 -0700
@@ -341,26 +341,6 @@ pxa2xx_ep_free_request (struct usb_ep *_
kfree(req);
}
-
-static void *
-pxa2xx_ep_alloc_buffer(struct usb_ep *_ep, unsigned bytes,
- dma_addr_t *dma, gfp_t gfp_flags)
-{
- char *retval;
-
- retval = kmalloc (bytes, gfp_flags & ~(__GFP_DMA|__GFP_HIGHMEM));
- if (retval)
- *dma = (dma_addr_t)~0;
- return retval;
-}
-
-static void
-pxa2xx_ep_free_buffer(struct usb_ep *_ep, void *buf, dma_addr_t dma,
- unsigned bytes)
-{
- kfree (buf);
-}
-
/*-------------------------------------------------------------------------*/
/*
@@ -927,9 +907,6 @@ static struct usb_ep_ops pxa2xx_ep_ops =
.alloc_request = pxa2xx_ep_alloc_request,
.free_request = pxa2xx_ep_free_request,
- .alloc_buffer = pxa2xx_ep_alloc_buffer,
- .free_buffer = pxa2xx_ep_free_buffer,
-
.queue = pxa2xx_ep_queue,
.dequeue = pxa2xx_ep_dequeue,
--- g26.orig/drivers/usb/gadget/s3c2410_udc.c 2007-07-01 12:10:23.000000000 -0700
+++ g26/drivers/usb/gadget/s3c2410_udc.c 2007-07-01 12:11:17.000000000 -0700
@@ -1197,36 +1197,6 @@ s3c2410_udc_free_request(struct usb_ep *
}
/*
- * s3c2410_udc_alloc_buffer
- */
-static void *s3c2410_udc_alloc_buffer(struct usb_ep *_ep,
- unsigned bytes, dma_addr_t *dma, gfp_t mem_flags)
-{
- char *retval;
-
- dprintk(DEBUG_VERBOSE, "%s()\n", __func__);
-
- if (!the_controller->driver)
- return NULL;
-
- retval = kmalloc (bytes, mem_flags);
- *dma = (dma_addr_t) retval;
- return retval;
-}
-
-/*
- * s3c2410_udc_free_buffer
- */
-static void s3c2410_udc_free_buffer (struct usb_ep *_ep, void *buf,
- dma_addr_t dma, unsigned bytes)
-{
- dprintk(DEBUG_VERBOSE, "%s()\n", __func__);
-
- if (bytes)
- kfree (buf);
-}
-
-/*
* s3c2410_udc_queue
*/
static int s3c2410_udc_queue(struct usb_ep *_ep, struct usb_request *_req,
@@ -1441,9 +1411,6 @@ static const struct usb_ep_ops s3c2410_e
.alloc_request = s3c2410_udc_alloc_request,
.free_request = s3c2410_udc_free_request,
- .alloc_buffer = s3c2410_udc_alloc_buffer,
- .free_buffer = s3c2410_udc_free_buffer,
-
.queue = s3c2410_udc_queue,
.dequeue = s3c2410_udc_dequeue,
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel