Re: [PATCH] drivers/usb/storage/unusual_devs.h whitespace cleanup
Phil Dibowitz <[email protected]>
| Newsgroups | gmane.linux.usb.devel |
|---|---|
| Message-ID | <[email protected]> |
S.Çağlar Onur wrote: > Hi; > > Following patch removes trailing whitespaces at the ends of lines and converts > smarttabs/whitespaces into real tabs. Taking LKML off, adding usb-storage and Greg. Leaving quoted patch for people on usb-storage who otherwise might not have seen it. > Signed-off-by: S.Çağlar Onur <[email protected]> Signed-off-by: Phil Dibowitz <[email protected]> > > drivers/usb/storage/unusual_devs.h | 188 > ++++++++++++++++++------------------ > 1 files changed, 94 insertions(+), 94 deletions(-) > > diff --git a/drivers/usb/storage/unusual_devs.h > b/drivers/usb/storage/unusual_devs.h > index 54979c2..b6bf31a 100644 > --- a/drivers/usb/storage/unusual_devs.h > +++ b/drivers/usb/storage/unusual_devs.h > @@ -50,10 +50,10 @@ > /* patch submitted by Vivian Bregier <[email protected]> > */ > UNUSUAL_DEV( 0x03eb, 0x2002, 0x0100, 0x0100, > - "ATMEL", > - "SND1 Storage", > - US_SC_DEVICE, US_PR_DEVICE, NULL, > - US_FL_IGNORE_RESIDUE), > + "ATMEL", > + "SND1 Storage", > + US_SC_DEVICE, US_PR_DEVICE, NULL, > + US_FL_IGNORE_RESIDUE), > > /* modified by Tobias Lorenz <[email protected]> */ > UNUSUAL_DEV( 0x03ee, 0x6901, 0x0000, 0x0200, > @@ -69,18 +69,18 @@ UNUSUAL_DEV( 0x03ee, 0x6906, 0x0003, 0x0003, > US_SC_DEVICE, US_PR_DEVICE, NULL, > US_FL_IGNORE_RESIDUE ), > > -UNUSUAL_DEV( 0x03f0, 0x0107, 0x0200, 0x0200, > +UNUSUAL_DEV( 0x03f0, 0x0107, 0x0200, 0x0200, > "HP", > "CD-Writer+", > - US_SC_8070, US_PR_CB, NULL, 0), > + US_SC_8070, US_PR_CB, NULL, 0), > > #ifdef CONFIG_USB_STORAGE_USBAT > -UNUSUAL_DEV( 0x03f0, 0x0207, 0x0001, 0x0001, > +UNUSUAL_DEV( 0x03f0, 0x0207, 0x0001, 0x0001, > "HP", > "CD-Writer+ 8200e", > US_SC_8070, US_PR_USBAT, init_usbat_cd, 0), > > -UNUSUAL_DEV( 0x03f0, 0x0307, 0x0001, 0x0001, > +UNUSUAL_DEV( 0x03f0, 0x0307, 0x0001, 0x0001, > "HP", > "CD-Writer+ CD-4e", > US_SC_8070, US_PR_USBAT, init_usbat_cd, 0), > @@ -115,10 +115,10 @@ UNUSUAL_DEV( 0x0411, 0x001c, 0x0113, 0x0113, > > /* Submitted by Ernestas Vaiciukevicius <[email protected]> */ > UNUSUAL_DEV( 0x0419, 0x0100, 0x0100, 0x0100, > - "Samsung Info. Systems America, Inc.", > - "MP3 Player", > - US_SC_DEVICE, US_PR_DEVICE, NULL, > - US_FL_IGNORE_RESIDUE ), > + "Samsung Info. Systems America, Inc.", > + "MP3 Player", > + US_SC_DEVICE, US_PR_DEVICE, NULL, > + US_FL_IGNORE_RESIDUE ), > > /* Reported by Orgad Shaneh <[email protected]> */ > UNUSUAL_DEV( 0x0419, 0xaace, 0x0100, 0x0100, > @@ -256,10 +256,10 @@ UNUSUAL_DEV( 0x0457, 0x0150, 0x0100, 0x0100, > * the revision to my model only > */ > UNUSUAL_DEV( 0x0457, 0x0151, 0x0100, 0x0100, > - "USB 2.0", > - "Flash Disk", > - US_SC_DEVICE, US_PR_DEVICE, NULL, > - US_FL_NOT_LOCKABLE ), > + "USB 2.0", > + "Flash Disk", > + US_SC_DEVICE, US_PR_DEVICE, NULL, > + US_FL_NOT_LOCKABLE ), > > #ifdef CONFIG_USB_STORAGE_KARMA > UNUSUAL_DEV( 0x045a, 0x5210, 0x0101, 0x0101, > @@ -408,19 +408,19 @@ UNUSUAL_DEV( 0x04da, 0x2373, 0x0000, 0x9999, > /* Most of the following entries were developed with the help of > * Shuttle/SCM directly. > */ > -UNUSUAL_DEV( 0x04e6, 0x0001, 0x0200, 0x0200, > +UNUSUAL_DEV( 0x04e6, 0x0001, 0x0200, 0x0200, > "Matshita", > "LS-120", > US_SC_8020, US_PR_CB, NULL, 0), > > -UNUSUAL_DEV( 0x04e6, 0x0002, 0x0100, 0x0100, > +UNUSUAL_DEV( 0x04e6, 0x0002, 0x0100, 0x0100, > "Shuttle", > "eUSCSI Bridge", > US_SC_DEVICE, US_PR_DEVICE, usb_stor_euscsi_init, > - US_FL_SCM_MULT_TARG ), > + US_FL_SCM_MULT_TARG ), > > #ifdef CONFIG_USB_STORAGE_SDDR09 > -UNUSUAL_DEV( 0x04e6, 0x0003, 0x0000, 0x9999, > +UNUSUAL_DEV( 0x04e6, 0x0003, 0x0000, 0x9999, > "Sandisk", > "ImageMate SDDR09", > US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init, > @@ -431,52 +431,52 @@ UNUSUAL_DEV( 0x04e6, 0x0005, 0x0100, 0x0208, > "SCM Microsystems", > "eUSB SmartMedia / CompactFlash Adapter", > US_SC_SCSI, US_PR_DPCM_USB, usb_stor_sddr09_dpcm_init, > - 0), > + 0), > #endif > > /* Reported by Markus Demleitner <[email protected]> */ > -UNUSUAL_DEV( 0x04e6, 0x0006, 0x0100, 0x0100, > +UNUSUAL_DEV( 0x04e6, 0x0006, 0x0100, 0x0100, > "SCM Microsystems Inc.", > "eUSB MMC Adapter", > - US_SC_SCSI, US_PR_CB, NULL, > - US_FL_SINGLE_LUN), > + US_SC_SCSI, US_PR_CB, NULL, > + US_FL_SINGLE_LUN), > > /* Reported by Daniel Nouri <[email protected]> */ > -UNUSUAL_DEV( 0x04e6, 0x0006, 0x0205, 0x0205, > +UNUSUAL_DEV( 0x04e6, 0x0006, 0x0205, 0x0205, > "Shuttle", > "eUSB MMC Adapter", > - US_SC_SCSI, US_PR_DEVICE, NULL, > - US_FL_SINGLE_LUN), > + US_SC_SCSI, US_PR_DEVICE, NULL, > + US_FL_SINGLE_LUN), > > -UNUSUAL_DEV( 0x04e6, 0x0007, 0x0100, 0x0200, > +UNUSUAL_DEV( 0x04e6, 0x0007, 0x0100, 0x0200, > "Sony", > "Hifd", > - US_SC_SCSI, US_PR_CB, NULL, > - US_FL_SINGLE_LUN), > + US_SC_SCSI, US_PR_CB, NULL, > + US_FL_SINGLE_LUN), > > -UNUSUAL_DEV( 0x04e6, 0x0009, 0x0200, 0x0200, > +UNUSUAL_DEV( 0x04e6, 0x0009, 0x0200, 0x0200, > "Shuttle", > "eUSB ATA/ATAPI Adapter", > US_SC_8020, US_PR_CB, NULL, 0), > > -UNUSUAL_DEV( 0x04e6, 0x000a, 0x0200, 0x0200, > +UNUSUAL_DEV( 0x04e6, 0x000a, 0x0200, 0x0200, > "Shuttle", > "eUSB CompactFlash Adapter", > US_SC_8020, US_PR_CB, NULL, 0), > > -UNUSUAL_DEV( 0x04e6, 0x000B, 0x0100, 0x0100, > +UNUSUAL_DEV( 0x04e6, 0x000B, 0x0100, 0x0100, > "Shuttle", > "eUSCSI Bridge", > - US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init, > + US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init, > US_FL_SCM_MULT_TARG ), > > -UNUSUAL_DEV( 0x04e6, 0x000C, 0x0100, 0x0100, > +UNUSUAL_DEV( 0x04e6, 0x000C, 0x0100, 0x0100, > "Shuttle", > "eUSCSI Bridge", > - US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init, > - US_FL_SCM_MULT_TARG ), > + US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init, > + US_FL_SCM_MULT_TARG ), > > -UNUSUAL_DEV( 0x04e6, 0x0101, 0x0200, 0x0200, > +UNUSUAL_DEV( 0x04e6, 0x0101, 0x0200, 0x0200, > "Shuttle", > "CD-RW Device", > US_SC_8020, US_PR_CB, NULL, 0), > @@ -556,9 +556,9 @@ UNUSUAL_DEV( 0x052b, 0x1911, 0x0100, 0x0100, > US_SC_DEVICE, US_PR_DEVICE, NULL, > US_FL_IGNORE_RESIDUE ), > > -UNUSUAL_DEV( 0x054c, 0x0010, 0x0106, 0x0450, > +UNUSUAL_DEV( 0x054c, 0x0010, 0x0106, 0x0450, > "Sony", > - "DSC-S30/S70/S75/505V/F505/F707/F717/P8", > + "DSC-S30/S70/S75/505V/F505/F707/F717/P8", > US_SC_SCSI, US_PR_DEVICE, NULL, > US_FL_SINGLE_LUN | US_FL_NOT_LOCKABLE | US_FL_NO_WP_DETECT ), > > @@ -572,7 +572,7 @@ UNUSUAL_DEV( 0x054c, 0x0010, 0x0500, 0x0610, > > > /* Reported by [email protected] */ > -UNUSUAL_DEV( 0x054c, 0x0025, 0x0100, 0x0100, > +UNUSUAL_DEV( 0x054c, 0x0025, 0x0100, 0x0100, > "Sony", > "Memorystick NW-MS7", > US_SC_DEVICE, US_PR_DEVICE, NULL, > @@ -593,21 +593,21 @@ UNUSUAL_DEV( 0x054c, 0x002c, 0x0501, 0x2000, > US_SC_DEVICE, US_PR_DEVICE, NULL, > US_FL_SINGLE_LUN ), > > -UNUSUAL_DEV( 0x054c, 0x002d, 0x0100, 0x0100, > +UNUSUAL_DEV( 0x054c, 0x002d, 0x0100, 0x0100, > "Sony", > "Memorystick MSAC-US1", > US_SC_DEVICE, US_PR_DEVICE, NULL, > US_FL_SINGLE_LUN ), > > /* Submitted by Klaus Mueller <[email protected]> */ > -UNUSUAL_DEV( 0x054c, 0x002e, 0x0106, 0x0310, > +UNUSUAL_DEV( 0x054c, 0x002e, 0x0106, 0x0310, > "Sony", > "Handycam", > US_SC_SCSI, US_PR_DEVICE, NULL, > US_FL_SINGLE_LUN ), > > /* Submitted by Rajesh Kumble Nayak <[email protected]> */ > -UNUSUAL_DEV( 0x054c, 0x002e, 0x0500, 0x0500, > +UNUSUAL_DEV( 0x054c, 0x002e, 0x0500, 0x0500, > "Sony", > "Handycam HC-85", > US_SC_UFI, US_PR_DEVICE, NULL, > @@ -648,26 +648,26 @@ UNUSUAL_DEV( 0x054c, 0x016a, 0x0000, 0x9999, > > /* Submitted by Frank Engel <[email protected]> */ > UNUSUAL_DEV( 0x054c, 0x0099, 0x0000, 0x9999, > - "Sony", > - "PEG Mass Storage", > - US_SC_DEVICE, US_PR_DEVICE, NULL, > - US_FL_FIX_INQUIRY ), > + "Sony", > + "PEG Mass Storage", > + US_SC_DEVICE, US_PR_DEVICE, NULL, > + US_FL_FIX_INQUIRY ), > > /* floppy reports multiple luns */ > UNUSUAL_DEV( 0x055d, 0x2020, 0x0000, 0x0210, > - "SAMSUNG", > - "SFD-321U [FW 0C]", > - US_SC_DEVICE, US_PR_DEVICE, NULL, > - US_FL_SINGLE_LUN ), > + "SAMSUNG", > + "SFD-321U [FW 0C]", > + US_SC_DEVICE, US_PR_DEVICE, NULL, > + US_FL_SINGLE_LUN ), > > > -UNUSUAL_DEV( 0x057b, 0x0000, 0x0000, 0x0299, > +UNUSUAL_DEV( 0x057b, 0x0000, 0x0000, 0x0299, > "Y-E Data", > "Flashbuster-U", > US_SC_DEVICE, US_PR_CB, NULL, > US_FL_SINGLE_LUN), > > -UNUSUAL_DEV( 0x057b, 0x0000, 0x0300, 0x9999, > +UNUSUAL_DEV( 0x057b, 0x0000, 0x0300, 0x9999, > "Y-E Data", > "Flashbuster-U", > US_SC_DEVICE, US_PR_DEVICE, NULL, > @@ -677,7 +677,7 @@ UNUSUAL_DEV( 0x057b, 0x0000, 0x0300, 0x9999, > * This entry is needed only because the device reports > * bInterfaceClass = 0xff (vendor-specific) > */ > -UNUSUAL_DEV( 0x057b, 0x0022, 0x0000, 0x9999, > +UNUSUAL_DEV( 0x057b, 0x0022, 0x0000, 0x9999, > "Y-E Data", > "Silicon Media R/W", > US_SC_DEVICE, US_PR_DEVICE, NULL, 0), > @@ -825,13 +825,13 @@ UNUSUAL_DEV( 0x0636, 0x0003, 0x0000, 0x9999, > US_SC_SCSI, US_PR_BULK, NULL, > US_FL_FIX_INQUIRY ), > > -UNUSUAL_DEV( 0x0644, 0x0000, 0x0100, 0x0100, > +UNUSUAL_DEV( 0x0644, 0x0000, 0x0100, 0x0100, > "TEAC", > "Floppy Drive", > - US_SC_UFI, US_PR_CB, NULL, 0 ), > + US_SC_UFI, US_PR_CB, NULL, 0 ), > > #ifdef CONFIG_USB_STORAGE_SDDR09 > -UNUSUAL_DEV( 0x066b, 0x0105, 0x0100, 0x0100, > +UNUSUAL_DEV( 0x066b, 0x0105, 0x0100, 0x0100, > "Olympus", > "Camedia MAUSB-2", > US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init, > @@ -867,14 +867,14 @@ UNUSUAL_DEV( 0x0686, 0x4011, 0x0001, 0x0001, > > /* Reported by Miguel A. Fosas <[email protected]> */ > UNUSUAL_DEV( 0x0686, 0x4017, 0x0001, 0x0001, > - "Minolta", > - "DIMAGE E223", > - US_SC_SCSI, US_PR_DEVICE, NULL, 0 ), > + "Minolta", > + "DIMAGE E223", > + US_SC_SCSI, US_PR_DEVICE, NULL, 0 ), > > UNUSUAL_DEV( 0x0693, 0x0005, 0x0100, 0x0100, > "Hagiwara", > "Flashgate", > - US_SC_SCSI, US_PR_BULK, NULL, 0 ), > + US_SC_SCSI, US_PR_BULK, NULL, 0 ), > > /* Reported by David Hamilton <[email protected]> */ > UNUSUAL_DEV( 0x069b, 0x3004, 0x0001, 0x0001, > @@ -918,7 +918,7 @@ UNUSUAL_DEV( 0x0781, 0x0100, 0x0100, 0x0100, > US_FL_SINGLE_LUN ), > > #ifdef CONFIG_USB_STORAGE_SDDR09 > -UNUSUAL_DEV( 0x0781, 0x0200, 0x0000, 0x9999, > +UNUSUAL_DEV( 0x0781, 0x0200, 0x0000, 0x9999, > "Sandisk", > "ImageMate SDDR-09", > US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init, > @@ -939,17 +939,17 @@ UNUSUAL_DEV( 0x07ab, 0xfccd, 0x0000, 0x9999, > US_SC_DEVICE, US_PR_DEVICE, NULL, > US_FL_FIX_CAPACITY), > > -UNUSUAL_DEV( 0x07af, 0x0004, 0x0100, 0x0133, > +UNUSUAL_DEV( 0x07af, 0x0004, 0x0100, 0x0133, > "Microtech", > "USB-SCSI-DB25", > US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init, > US_FL_SCM_MULT_TARG ), > > -UNUSUAL_DEV( 0x07af, 0x0005, 0x0100, 0x0100, > +UNUSUAL_DEV( 0x07af, 0x0005, 0x0100, 0x0100, > "Microtech", > "USB-SCSI-HD50", > US_SC_DEVICE, US_PR_DEVICE, usb_stor_euscsi_init, > - US_FL_SCM_MULT_TARG ), > + US_FL_SCM_MULT_TARG ), > > #ifdef CONFIG_USB_STORAGE_DPCM > UNUSUAL_DEV( 0x07af, 0x0006, 0x0100, 0x0100, > @@ -1053,10 +1053,10 @@ UNUSUAL_DEV( 0x07c4, 0xa109, 0x0000, 0xffff, > * as "DualSlot CompactFlash(TM) & MStick Drive USB" > */ > UNUSUAL_DEV( 0x07c4, 0xa10b, 0x0000, 0xffff, > - "DataFab Systems Inc.", > - "USB CF+MS", > - US_SC_SCSI, US_PR_DATAFAB, NULL, > - 0 ), > + "DataFab Systems Inc.", > + "USB CF+MS", > + US_SC_SCSI, US_PR_DATAFAB, NULL, > + 0 ), > > #endif > > @@ -1119,10 +1119,10 @@ UNUSUAL_DEV( 0x08bd, 0x1100, 0x0000, 0x0000, > * US_FL_IGNORE_RESIDUE Needed > */ > UNUSUAL_DEV( 0x08ca, 0x3103, 0x0100, 0x0100, > - "AIPTEK", > - "Aiptek USB Keychain MP3 Player", > - US_SC_DEVICE, US_PR_DEVICE, NULL, > - US_FL_IGNORE_RESIDUE), > + "AIPTEK", > + "Aiptek USB Keychain MP3 Player", > + US_SC_DEVICE, US_PR_DEVICE, NULL, > + US_FL_IGNORE_RESIDUE), > > /* Entry needed for flags. Moreover, all devices with this ID use > * bulk-only transport, but _some_ falsely report Control/Bulk instead. > @@ -1166,26 +1166,26 @@ UNUSUAL_DEV( 0x090c, 0x1132, 0x0000, 0xffff, > * Submitted by James Courtier-Dutton <[email protected]> > */ > UNUSUAL_DEV( 0x0a17, 0x0004, 0x1000, 0x1000, > - "Pentax", > - "Optio 2/3/400", > - US_SC_DEVICE, US_PR_DEVICE, NULL, > - US_FL_FIX_INQUIRY ), > + "Pentax", > + "Optio 2/3/400", > + US_SC_DEVICE, US_PR_DEVICE, NULL, > + US_FL_FIX_INQUIRY ), > > > /* Submitted by Per Winkvist <[email protected]> */ > UNUSUAL_DEV( 0x0a17, 0x006, 0x0000, 0xffff, > - "Pentax", > - "Optio S/S4", > - US_SC_DEVICE, US_PR_DEVICE, NULL, > - US_FL_FIX_INQUIRY ), > + "Pentax", > + "Optio S/S4", > + US_SC_DEVICE, US_PR_DEVICE, NULL, > + US_FL_FIX_INQUIRY ), > > /* These are virtual windows driver CDs, which the zd1211rw driver > * automatically converts into WLAN devices. */ > UNUSUAL_DEV( 0x0ace, 0x2011, 0x0101, 0x0101, > - "ZyXEL", > - "G-220F USB-WLAN Install", > - US_SC_DEVICE, US_PR_DEVICE, NULL, > - US_FL_IGNORE_DEVICE ), > + "ZyXEL", > + "G-220F USB-WLAN Install", > + US_SC_DEVICE, US_PR_DEVICE, NULL, > + US_FL_IGNORE_DEVICE ), > > UNUSUAL_DEV( 0x0ace, 0x20ff, 0x0101, 0x0101, > "SiteCom", > @@ -1211,17 +1211,17 @@ UNUSUAL_DEV( 0x0bf6, 0xa001, 0x0100, 0x0110, > > #ifdef CONFIG_USB_STORAGE_DATAFAB > UNUSUAL_DEV( 0x0c0b, 0xa109, 0x0000, 0xffff, > - "Acomdata", > - "CF", > - US_SC_SCSI, US_PR_DATAFAB, NULL, > - US_FL_SINGLE_LUN ), > + "Acomdata", > + "CF", > + US_SC_SCSI, US_PR_DATAFAB, NULL, > + US_FL_SINGLE_LUN ), > #endif > #ifdef CONFIG_USB_STORAGE_SDDR55 > UNUSUAL_DEV( 0x0c0b, 0xa109, 0x0000, 0xffff, > - "Acomdata", > - "SM", > - US_SC_SCSI, US_PR_SDDR55, NULL, > - US_FL_SINGLE_LUN ), > + "Acomdata", > + "SM", > + US_SC_SCSI, US_PR_SDDR55, NULL, > + US_FL_SINGLE_LUN ), > #endif > > /* Submitted by: Nick Sillik <[email protected]> > > -- Phil Dibowitz [email protected] Open Source software and tech docs Insanity Palace of Metallica http://www.phildev.net/ http://www.ipom.com/ "Never write it in C if you can do it in 'awk'; Never do it in 'awk' if 'sed' can handle it; Never use 'sed' when 'tr' can do the job; Never invoke 'tr' when 'cat' is sufficient; Avoid using 'cat' whenever possible" -- Taylor's Laws of Programming ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ [email protected] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
signature.asc
(application/pgp-signature, 252 B)
-----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.6 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFGjAinN5XoxaHnMrsRAvbYAJ4ig3ilHdyreR7nFpAz5w6PDV6ZYwCfUCpj fhC6TKwFjHGIMJfz8McvDgk= =+vfL -----END PGP SIGNATURE-----