Re: [2.6.22-rc7] khubd NULL deref oops...

Hi Michal and thanks for your reply,

On 08/07/07, Michal Piotrowski <[email protected]> wrote:
> Hi Daniel,
>
> On 08/07/07, Daniel J Blueman <[email protected]> wrote:
> > When plugging in a USB 2 mass-storage device which I've been seeing
> > problems with, I caught a khubd oops [1]. Kernel is 2.6.22-rc7
>
> Is this a regression?

I believe this is not a regression, so should not hold 2.6.22 final back.

> > on ia32
> > built with Ubuntu's 2.6.22 .config.
>
> Please send this config.

Attached.

Thanks for your input!
  Daniel

> > Let me know if you need more details,
> >   Daniel
> >
> > --- [1]
> >
> > [ 4764.112000] usb 5-3: new high speed USB device using ehci_hcd and address 8
> > [ 4764.244000] PM: Adding info for usb:5-3
> > [ 4764.244000] PM: Adding info for No Bus:usbdev5.8_ep00
> > [ 4764.244000] usb 5-3: configuration #1 chosen from 1 choice
> > [ 4764.244000] PM: Adding info for usb:5-3:1.0
> > [ 4764.244000] scsi6 : SCSI emulation for USB Mass Storage devices
> > [ 4764.244000] PM: Adding info for No Bus:host6
> > [ 4764.244000] PM: Adding info for No Bus:usbdev5.8_ep81
> > [ 4764.244000] PM: Adding info for No Bus:usbdev5.8_ep02
> > [ 4764.244000] PM: Adding info for No Bus:usbdev5.8
> > [ 4764.244000] usb-storage: device found at 8
> > [ 4764.244000] usb-storage: waiting for device to settle before scanning
> > [ 4769.244000] usb-storage: device scan complete
> > [ 4769.244000] PM: Adding info for No Bus:target6:0:0
> > [ 4769.244000] scsi 6:0:0:0: Direct-Access     Maxtor 6 Y120L0
> >   0811 PQ: 0 ANSI: 0
> > [ 4769.244000] PM: Adding info for No Bus:target6:0:1
> > [ 4769.244000] PM: Removing info for No Bus:target6:0:1
> > [ 4769.244000] PM: Adding info for No Bus:target6:0:2
> > [ 4769.244000] PM: Removing info for No Bus:target6:0:2
> > [ 4769.244000] PM: Adding info for No Bus:target6:0:3
> > [ 4769.244000] PM: Removing info for No Bus:target6:0:3
> > [ 4769.244000] PM: Adding info for No Bus:target6:0:4
> > [ 4769.244000] PM: Removing info for No Bus:target6:0:4
> > [ 4769.244000] PM: Adding info for No Bus:target6:0:5
> > [ 4769.244000] PM: Removing info for No Bus:target6:0:5
> > [ 4769.244000] PM: Adding info for No Bus:target6:0:6
> > [ 4769.244000] PM: Removing info for No Bus:target6:0:6
> > [ 4769.244000] PM: Adding info for No Bus:target6:0:7
> > [ 4769.244000] PM: Removing info for No Bus:target6:0:7
> > [ 4769.244000] PM: Adding info for scsi:6:0:0:0
> > [ 4769.248000] sd 6:0:0:0: [sdb] 240121728 512-byte hardware sectors (122942 MB)
> > [ 4769.248000] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
> > [ 4769.248000] sd 6:0:0:0: [sdb] Assuming drive cache: write through
> > [ 4769.248000] sd 6:0:0:0: [sdb] 240121728 512-byte hardware sectors (122942 MB)
> > [ 4769.252000] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
> > [ 4769.252000] sd 6:0:0:0: [sdb] Assuming drive cache: write through
> > [ 4769.252000]  sdb: sdb1 < sdb5 sdb6<6>usb 5-3: reset high speed USB
> > device using ehci_hcd and address 8
> > [ 4769.544000] usb 5-3: device descriptor read/64, error -71
> > [ 4769.760000] usb 5-3: device descriptor read/64, error -71
> > [ 4769.976000] usb 5-3: reset high speed USB device using ehci_hcd and address 8
> > [ 4770.088000] usb 5-3: device descriptor read/64, error -71
> > [ 4770.304000] usb 5-3: device descriptor read/64, error -71
> > [ 4770.520000] usb 5-3: reset high speed USB device using ehci_hcd and address 8
> > [ 4770.928000] usb 5-3: device not accepting address 8, error -71
> > [ 4771.040000] usb 5-3: reset high speed USB device using ehci_hcd and address 8
> > [ 4771.448000] usb 5-3: device not accepting address 8, error -71
> > [ 4771.448000] usb 5-3: USB disconnect, address 8
> > [ 4771.448000] PM: Removing info for No Bus:usbdev5.8_ep81
> > [ 4771.448000] PM: Removing info for No Bus:usbdev5.8_ep02
> > [ 4771.448000] BUG: unable to handle kernel NULL pointer dereference
> > at virtual address 00000000
> > [ 4771.448000]  printing eip:
> > [ 4771.448000] c0255cc7
> > [ 4771.448000] *pde = 00000000
> > [ 4771.448000] Oops: 0000 [#1]
> > [ 4771.448000] SMP
> > [ 4771.448000] Modules linked in: usb_storage ide_core libusual
> > binfmt_misc nfs lockd sunrpc ipv6 sonypi ppdev acpi_cpufreq
> > cpufreq_stats cpufreq_powersave cpufreq_conservative cpufreq_userspace
> > cpufreq_ondemand freq_table button ac video dock container sbs battery
> > af_packet sbp2 parport_pc lp parport fuse snd_hda_intel snd_pcm_oss
> > snd_mixer_oss snd_pcm snd_seq_dummy snd_seq_oss joydev snd_seq_midi
> > snd_rawmidi snd_seq_midi_event tifm_7xx1 pcmcia snd_seq snd_timer
> > snd_seq_device sky2 serio_raw tifm_core snd soundcore yenta_socket
> > rsrc_nonstatic pcmcia_core psmouse iTCO_wdt iTCO_vendor_support
> > snd_page_alloc shpchp pci_hotplug intel_agp agpgart evdev ext3 jbd
> > mbcache sg sd_mod sr_mod cdrom ata_generic ata_piix ohci1394 ieee1394
> > libata scsi_mod ehci_hcd uhci_hcd usbcore thermal processor fan
> > [ 4771.448000] CPU:    0
> > [ 4771.448000] EIP:    0060:[<c0255cc7>]    Not tainted VLI
> > [ 4771.448000] EFLAGS: 00010202   (2.6.22-rc7-50 #1)
> > [ 4771.448000] EIP is at make_class_name+0x27/0x80
> > [ 4771.448000] eax: 00000000   ebx: ffffffff   ecx: ffffffff   edx: 0000000b
> > [ 4771.448000] esi: f89ffca6   edi: 00000000   ebp: 00000000   esp: f7d05e5c
> > [ 4771.448000] ds: 007b   es: 007b   fs: 00d8  gs: 0000  ss: 0068
> > [ 4771.448000] Process khubd (pid: 2188, ti=f7d04000 task=c190f480
> > task.ti=f7d04000)
> > [ 4771.448000] Stack: dfc9a608 dfc9a494 dfc9a600 dfc9a608 f8a12ac0
> > c0255e59 00000000 f8a12b88
> > [ 4771.448000]        dfc9a600 dfc9a494 00000246 00000000 c0255ee8
> > dfc9a400 f89f9b56 dfc9a400
> > [ 4771.448000]        efc26800 f89f71fb efc26830 efc26800 f89f17e5
> > efc26af8 f41ce818 f8be1100
> > [ 4771.448000] Call Trace:
> > [ 4771.448000]  [<c0255e59>] class_device_del+0x99/0x120
> > [ 4771.448000]  [<c0255ee8>] class_device_unregister+0x8/0x10
> > [ 4771.448000]  [<f89f9b56>] __scsi_remove_device+0x26/0x60 [scsi_mod]
> > [ 4771.448000]  [<f89f71fb>] scsi_forget_host+0x4b/0x60 [scsi_mod]
> > [ 4771.448000]  [<f89f17e5>] scsi_remove_host+0x55/0xe0 [scsi_mod]
> > [ 4771.448000]  [<f8bd2c3e>] storage_disconnect+0xe/0x20 [usb_storage]
> > [ 4771.448000]  [<f8a4ea24>] usb_unbind_interface+0x44/0x90 [usbcore]
> > [ 4771.448000]  [<c0255408>] __device_release_driver+0x68/0xa0
> > [ 4771.448000]  [<c0255813>] device_release_driver+0x23/0x40
> > [ 4771.448000]  [<c0254d1c>] bus_remove_device+0x5c/0x90
> > [ 4771.448000]  [<c0253020>] device_del+0x160/0x260
> > [ 4771.448000]  [<f8a4bf28>] usb_disable_device+0x78/0xe0 [usbcore]
> > [ 4771.448000]  [<f8a48285>] usb_disconnect+0x95/0x130 [usbcore]
> > [ 4771.448000]  [<f8a48910>] hub_thread+0x270/0xc30 [usbcore]
> > [ 4771.448000]  [<c012a4e6>] do_exit+0x516/0x800
> > [ 4771.448000]  [<c0139b00>] autoremove_wake_function+0x0/0x40
> > [ 4771.448000]  [<f8a486a0>] hub_thread+0x0/0xc30 [usbcore]
> > [ 4771.448000]  [<c0139834>] kthread+0x34/0x60
> > [ 4771.448000]  [<c0139800>] kthread+0x0/0x60
> > [ 4771.448000]  [<c0105397>] kernel_thread_helper+0x7/0x10
> > [ 4771.448000]  =======================
> > [ 4771.448000] Code: 00 00 00 00 55 57 56 53 83 ec 04 31 ed 83 cb ff
> > 89 c6 89 c7 89 14 24 89 d9 89 e8 f2 ae f7 d1 49 8b 04 24 89 ca 89 d9
> > 8b 38 89 e8 <f2> ae f7 d1 49 8d 44 0a 02 ba d0 00 00 00 e8 06 36 f2 ff
> > 31 d2
> > [ 4771.448000] EIP: [<c0255cc7>] make_class_name+0x27/0x80 SS:ESP 0068:f7d05e5c
> > [ 4771.448000] sd 6:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT
> > driverbyte=DRIVER_OK,SUGGEST_OK
> > [ 4771.448000] end_request: I/O error, dev sdb, sector 163846928
> > [ 4771.448000] printk: 84 messages suppressed.
> > [ 4771.448000] Buffer I/O error on device sdb, logical block 20480866
> > [ 4771.448000] Buffer I/O error on device sdb, logical block 20480866
> > [ 4771.448000]  >
> > [ 4771.448000] sd 6:0:0:0: [sdb] Attached SCSI disk
> > [ 4771.448000] sd 6:0:0:0: Attached scsi generic sg2 type 0
> > [ 4771.556000] Buffer I/O error on device sdb, logical block 30015200
-- 
Daniel J Blueman

-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/

_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel