Re: [PATCH] PXA27x UDC driver.

Rodolfo Giometti wrote:
> That's what I wish to do... I wish cleaning up as much possible my
> pxa27x version af the driver so we can have something common where we
> can work on.
>
> Sorry for the delay but in these next days I'll read back all your
> suggestions and I'll provide a new patch ASAP.
>
> However I would like avoiding to remove what I did on
> usb_ep_autoconfig() since I got functional g_ether device with RNDIS
> support... there could be another way to resolve this problem?
>
> Thanks a lot,
>
> Rodolfo
>   
Rodolfo,

I am eager to see an "official" USB driver. I have used a patch I found 
on the web that was attributed to you for 2.6.20 in our recent project. 
It patched cleanly and has worked fairly well. I am busy with other 
projects right now but might be able to squeeze some time to test on our 
board.

We have a custom PXA 270 board and we are moving to the PXA 320. I was 
very concerned that we have no 270 driver in mainline and no hope of a 
320 driver.

Regards,
Vern
InHand Electronics, Inc.

-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel