[patch 16/16] usb: document device authorization

Signed-off-by: Inaky Perez-Gonzalez <[email protected]>

---
 Documentation/usb/authorization.txt |   92 ++++++++++++++++++++++++++++++++++++
 1 file changed, 92 insertions(+)

Index: linux.hg/Documentation/usb/authorization.txt
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ linux.hg/Documentation/usb/authorization.txt	2007-07-09 16:02:50.000000000 -0700
@@ -0,0 +1,92 @@
+
+Authorizing (or not) your USB devices to connect to the system
+
+(C) 2007 Inaky Perez-Gonzalez <[email protected]> Intel Corporation
+
+This feature allows you to control if a USB device can be used (or
+not) in a system. This feature will allow you to implement a lock-down
+of USB devices, fully controlled by user space.
+
+As of now, when a USB device is connected it is configured and
+it's interfaces inmediately made available to the users. With this
+modification, only if root authorizes the device to be configured will
+then it be possible to use it.
+
+Usage:
+
+Authorize a device to connect:
+
+$ echo 1 > /sys/usb/devices/DEVICE/authorized
+
+Deauthorize a device:
+
+$ echo 0 > /sys/usb/devices/DEVICE/authorized
+
+Set new devices connected to hostX to be deauthorized by default (ie:
+lock down):
+
+$ echo 0 > /sys/class/usb_host/HOST/authorized_default
+
+Remove the lock down:
+
+$ echo 1 > /sys/class/usb_host/HOST/authorized_default
+
+By default, Wired USB devices are authorized by default to
+connect. Wireless USB hosts deauthorize by default all new connected
+devices (this is so because we need to do an authentication phase
+before authorizing).
+
+
+Example system lockdown (lame)
+-----------------------
+
+Imagine you want to implement a lockdown so only devices of type XYZ
+can be connected (for example, it is a kiosk machine with a visible
+USB port):
+
+boot up
+rc.local ->
+
+ for host in /sys/bus/devices/usb*
+ do
+    echo 0 > $host/authorized_default
+ done
+
+Hookup an script to udev, for new USB devices
+
+ if device_is_my_type $DEV
+ then
+   echo 1 > $device_path/authorized
+ done
+
+
+Now, device_is_my_type() is where the juice for a lockdown is. Just
+checking if the class, type and protocol match something is the worse
+security verification you can make (or the best, for someone willing
+to break it). If you need something secure, use crypto and Certificate
+Authentication or stuff like that. Something simple for an storage key
+could be:
+
+function device_is_my_type()
+{
+   echo 1 > authorized		# temporarily authorize it
+                                # FIXME: make sure none can mount it
+   mount DEVICENODE /mntpoint
+   sum=$(md5sum /mntpoint/.signature)
+   if [ $sum = $(cat /etc/lockdown/keysum) ]
+   then
+        echo "We are good, connected"
+        umount /mntpoint
+        # Other stuff so others can use it
+   else
+        echo 0 > authorized
+   fi
+}
+
+
+Of course, this is lame, you'd want to do a real certificate
+verification stuff with PKI, so you don't depend on a shared secret,
+etc, but you get the idea. Anybody with access to a device gadget kit
+can fake descriptors and device info. Don't trust that. You are
+welcome.
+

--

Inaky

-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel