Re: High speed devices with kernel 2.6.21.5.
"Branden Sletteland" <[email protected]>
| Newsgroups | gmane.linux.usb.devel |
|---|---|
| Message-ID | <[email protected]> |
I went back and tried this power cycling method with a 2.6.21.5 kernel and a 2.6.22 kernel with the same results as my 2.6.20.11 kernel with the 2.6.21.5 drivers/usb/host directory. Now I just need to figure out how to get the storage devices to come up as high speed devices when they are powered on when the kernel is initializing, and a couple other weird states. Branden > I guess it wasn't 100% the same result, if the storage device is > plugged in during kernel initialization the device is detected as a > high speed device, but if I power cycle the storage device it > eventually gets detected as a high speed device, as you can see from > the following dmesg dump. ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ [email protected] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel