[PATCH 050/149] USB: EHCI: Safe endianness for transfer buffers after reset in case of HUB with TT
Greg Kroah-Hartman <[email protected]>
| Newsgroups | gmane.linux.usb.devel |
|---|---|
| Message-ID | <[email protected]> |
From: Vladimir Barinov <[email protected]> This patch fixes the endianness select for transfer buffers in EHCI controllers that have Transaction Translator built in the hub. Also I cleaned it up to make rid of magic numbers. Signed-off-by: Vladimir Barinov <[email protected]> Cc: <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> --- drivers/usb/host/ehci-hcd.c | 10 ++++++++-- drivers/usb/host/ehci.h | 6 ++++++ 2 files changed, 14 insertions(+), 2 deletions(-) diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 889c202..a205a53 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -201,9 +201,15 @@ static void tdi_reset (struct ehci_hcd *ehci) u32 __iomem *reg_ptr; u32 tmp; - reg_ptr = (u32 __iomem *)(((u8 __iomem *)ehci->regs) + 0x68); + reg_ptr = (u32 __iomem *)(((u8 __iomem *)ehci->regs) + USBMODE); tmp = ehci_readl(ehci, reg_ptr); - tmp |= 0x3; + tmp |= USBMODE_CM_HC; + /* The default byte access to MMR space is LE after + * controller reset. Set the required endian mode + * for transfer buffers to match the host microprocessor + */ + if (ehci_big_endian_mmio(ehci)) + tmp |= USBMODE_BE; ehci_writel(ehci, tmp, reg_ptr); } diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index 4d61710..2c68a04 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -302,6 +302,12 @@ struct ehci_regs { #define PORT_RWC_BITS (PORT_CSC | PORT_PEC | PORT_OCC) } __attribute__ ((packed)); +#define USBMODE 0x68 /* USB Device mode */ +#define USBMODE_SDIS (1<<3) /* Stream disable */ +#define USBMODE_BE (1<<2) /* BE/LE endianness select */ +#define USBMODE_CM_HC (3<<0) /* host controller mode */ +#define USBMODE_CM_IDLE (0<<0) /* idle state */ + /* Appendix C, Debug port ... intended for use with special "debug devices" * that can help if there's no serial console. (nonstandard enumeration.) */ -- 1.5.2.2 ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ [email protected] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel